Facebook
Description

Welcome Maint And Miscellaneous Br Works At Joinery, Plumbing, Flooring And Sanitary Fittings To Officers Married Accn At Age Br-ii Under Ge (south) Ambala Cantt

Tendering Authority: Military Engineer Services

India, Haryana, Ambala

NTID

29077444

Last Date For Submission

06 Oct, 2022

Closing Date

06 Oct, 2022

BOQ Items
# Item Quantity Units
1 Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed. 200.00 Sqm
2 Material and labour for brick work with sub class B bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. 5.00 Cum
3 Material and labour for Brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) including demolition of old brick /stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. Note : Old serviceable brick obtained from demolition shall be reused. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work. 3.00 Cum
4 Material and labour for brick work with sub class-"B" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. 16.00 Sqm
5 Material and labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE. 60.00 Sqm
6 Material and labour for carrying out efflorescence treatment to unplastered wall surface comprising of the following specifications and sequence with and including 15 mm thick rendering in CM 1:4 finished even and smooth without using extra cement : - (a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent : - (i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied BY HAND while the prime is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer s instructions: - (i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (c) PMM surface should be allowed to dry for one day. After that it should painted with two coats of one of the following compound mixed with cement only in ratio of 1 (selected compound) : 1:5 (Cement) : - (i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer s instructions: - (i) Pidifin 2K of M/S Pidilite. (ii) Brush Coat of M/S Sika. (iii) Brush Bond of M/S FOSROC. NOTE : - Both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours. (e) Sprinkle loose coarse sand after second coat while surface is tacky. NOTE: - (i) The item will be executed by authorized applicator only of the selected / approved company. Contractor shall submit details of authorised applicator for approval of GE before commencement of work in respect of above item. (ii) Every stage of work will be approved by GE, then only next layer will be executed by contractor. 60.00 Sqm
7 Material and labour for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed 180.00 Sqm
8 Material and labour for 10mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement with and including applying two coats of oil bound distemper over a coat of primer applying with roller including necessary scaffoldings etc complete all as specified and directed. 40.00 Sqm
9 Preparation of new plastered of surfaces of walls and applying three coats of white wash complete all as specified. 20.00 Sqm
10 Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacturer's instruction complete all as specified and directed. 150.00 Sqm
11 Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed. 70.00 Sqm
12 Material and labour for preparation of old plastered or unplastered surfaces of walls by washing rubbing and applying one coat of oil bound distemper complete all as specified and as directed. 4500.00 Sqm
13 Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed. 17220.00 Sqm
14 Material and labour for preparation of old plastered or unplastered surfaces on walls by washing rubbing and applying two coats of white wash on walls complete all as specified and as directed. 8000.00 Sqm
15 Material and labour for preparation of old plastered or unplastered surfaces on ceilings by washing rubbing and applying two coats of white wash on ceilings complete all as specified and as directed. 7000.00 sqm
16 Material and labour for preparation of old painted plastered surfaces of any description over 10 cm width or girth and applying one coat of plastic emulsion paint on wall complete all as specified and directed. 650.00 Sqm
17 Material and labour for preparation of old decorative surface of ceilings etc by washing rubbing down etc and applying one coat of oil emulsion paint complete all as specified and directed. 3500.00 Sqm
18 Material and labour for preparation of old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying one coat of exterior wheather proof paint coloured complete all as per manufacturers instructions complete all as specified and directed. 1500.00 Sqm
19 Material and labour for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed 3000.00 Sqm
20 aterial and labour for preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel complete all as specified and directed. 7000.00 Sqm
21 Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 40.00 Sqm
22 Material and labour for premium quality glazed ceramic coloured tiles of size 350x250mm/450x350mm x 7mm thick gloosy/mat finish as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:3 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 160.00 Sqm
23 Material and labour for 18 to 20mm thick Granite stone of any colour (of any type) work (table rubbed, polished & moulding), as in floors, cooking platforms and like bedded with and including 15 mm thick screed bed in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding and polishing including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 8.00 sqm
24 Material and labour for premium quality, light shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed as in neat, neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:6) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 115.00 Sqm
25 Material and labour for premium quality, light shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dado, skirting, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 10 mm thick rendering in cement mortar (1:4) including dismantling of existing tiles etc including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. 25.00 Sqm
26 Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 410.00 RM
27 Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing whereever required, including taking down of old tubing as existing at site and removal, complete all as specified and as directed. 30.00 RM
28 Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. 8.00 Each
29 Supply and fixing of water storage tank of 1000 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. 9.00 Each
30 Supply and fixing in repair of stop valve 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed. 35.00 Each
31 Supply and fixing (in repair) 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed. 80.00 Each
32 Supply and fixed in repair of stop cock, fancy type, chromium plated, long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified.(Note : Weight of stop cock shall not be less than 0.575 Kg) (Note : Weight of stop cock shall not be less than 0.575 Kg) 40.00 Each
33 Supply and fixed as in repair for bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg) 80.00 Each
34 Supply and fixing (in repair) of vitreous china squatting pan of 'Orissa' pattern' size 580 x 440mm white (Ist quality) with P or S trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed. 3.00 Each
35 Supply and fixing (in repair) vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with P or S trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed. 15.00 Each
36 Supply and fixing (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed. 15.00 Each
37 Supply and fixing in repair of 10 litre capacity flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed. 20.00 Each
38 Supply and fixing (in repair) of WHB mixer (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed. 14.00 Each
39 Supply and fixing in repair of fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. 45.00 Each
40 Supply and fixing in repair of PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed. 10.00 Each
41 Supply and fixing in repair of 100 mm dia CP grating any type fixed in floor and jointed in CM 1:3 complete all as specified and as directed. 30.00 Each
42 Supply and fixing in repair of stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm weighing not less than 5.0 Kg each fix with stainless steel screw to wall, complete all as specified and directed 20.00 Each
43 Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets, connecting union waste pipe with drainage board over all size 915 mm x 460 mm with bowl size 410 mm x 330mm x 160 mm etc; complete all as specified and directed. 10.00 Each
44 Supply and fixing in repair of Kitchen sink made of stainless steel 1mm thick with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 495mm x420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed. 10.00 Each
45 Supply and fixing in repair of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements complete all as specified and directed. 40.00 Each
46 Supply and fixing in repair of PVC coloured bath cabinet overall size 400 x 500 mm decorative design with looking mirror, nepkin rail complete all as specified and as directed. 45.00 Each
47 Supply and fixing in repair of brass CP toilet paper holder, recessed type, fixed to wall with brass CP screws complete all as specified and as directed. 25.00 Each
48 Supply and fixing in repair of soap dish brass CP superior quality, fancy type fixed with and including brass CP screws complete all as specified and as directed. 25.00 Each
49 Supply and fixing (in repair) CP Hand shower (Health faucet) including 1.50 meter long flexible tube. complete all as specified and as directed 80.00 Each
50 Supply and fixing (in repair) of fancy type brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 5.00 Each
51 Supply and fixing in repairs PVC waste pipe for wash hand basin / urinals / kitchen sink of dia 32/40 mm of required length at site complete all as specified and as directed. 60.00 Each
52 Supply and fixing in repair of PVC connections 45 cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed. 80.00 Each
53 Supply and fixing (in repair) of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed. 30.00 Each
54 Supply and fixing in repair of aluminium pre coated of choice colour designed type 25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed. 250.00 RM
55 Supply and fixing in repair of PVC seat cover (for EWC / Anglo Indian type WC complete all as specified and as directed. 42.00 Each
56 Supply and fixing in repair of CP Jet spray for with 1.5 mtr long pipe fixed in EWC complete all as specified. 10.00 Each
57 Supply and fixing in repair of pegs set of 6 Nos, power coated GI fixed with cadmium plated screws complete all as specified and as directed. 20.00 Each
58 Supply and fixing (in repairs), vitreous chainaware Dome (S-30) concealed floor trap mounted, starwhite colour, EWC pedestal pattern alongwith and including premoulded vitreous china ware cistern, seat cover complete all as specified and directed. 4.00 EAch
59 Supply and fixing PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints laid in floors or trenches including dismantling of existing pipes of any description any length complete all as specified and as directed. 70.00 RM
60 Supply and fixing PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints laid in floors or trenches including dismantling of existing pipes of any description any length complete all as specified and as directed. 50.00 RM
61 Supply and fixing in repairs of PVC (SWR) bends 110 mm bore complete all as specified and as directed. 30.00 Each
62 Supply and fixing in repairs of PVC (SWR) bends 75 mm bore complete all as specified and as directed. 20.00 Each
63 Supply and fixing of PVC (SWR) junction single, (Single T) 110mm bore equal or unequal fitted with access door complete all as specified and directed. 20.00 Each
64 Supply and fixing of PVC (SWR) junction single, (Single T) 75mm bore equal or unequal fitted with access door complete all as specified and directed. 15.00 Each
65 Supply and fixing in repairs of 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed. 10.00 Each
66 Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 250 litres and not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. 80.00 Each
67 Cleaning and removing all scale and dirt, etc from existing water storage tanks of capacity exceeding 500 litres and not exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in charge of cleaning, including writing date of cleaning with oil paint of of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) NOTE: - (i) The whole process of disconnecting, reconnecting and refixing in same position after cleaning shall be done on the same day, if failing so, Rs. 100/- shall be deducted for each tank per day from the contractor due. (ii) A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. 150.00 Each
68 Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. 46.00 Each
69 Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. 29.00 Each
70 Taking down shutter of any description exc 1 sqm and n.exc 2 Sqm each and refixing in same opening etc complete all as specified and directed. 25.00 Per leaf
71 Taking down shutter of any description exc 2 Sqm each and refixing in same opening etc complete all as specified and directed. 10.00 Per leaf
72 Taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site complete all as specified and directed. 30.00 Per leaf
73 Supply and fixing of pressed steel frames for doors of size 165 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. 75.00 RM
74 Supply and fixing of pressed steel frames for doors of size 125 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. 50.00 RM
75 Supply and fixing of factory made 35 mm thick, second class hard wood rail and style, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commrcial veneering on both faces ace, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed. 62.00 sqm
76 Supply and fixing of IInd class (hollock) factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. 40.00 Sqm
77 Supply and fixing of factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed. Note:- Manufacturers Test certificate to be submitted before incorporation. 26.00 Sqm
78 Supply and fixing of steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable including PCC(C-O ,1:3:6 using 12.5 graded agg) bed blocks for hold fasts and one shop coat of red oxide primer etc complete all as specified and directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery , grills 10mm square bars. (iii) Only Glazing, wire mesh & painting grill shall be measured & paid for separately) 25.00 Sqm
79 Supply and fixing of factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed. 68.00 RM
80 Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including three Nos aluminium hinges for each door complete all as per manufacturer instructions complete all as specified and directed. 21.00 Sqm
81 Supply and fixing of butt hinges, medium weight, cold rolled, mild steel, ISI marked 100 mm size complete all as specified and directed. 90.00 Each
82 Supply and fixing of extruded aluminium alloy handles, fabricated type, anodized of size 150 mm long complete all as specified and directed. 130.00 Each
83 Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed. 150.00 Each
84 Supply and fixing of 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed. 25.00 Each
85 Supply and fixing in repair of 150mm long floor door stopper of aluminium alloy body & tongue, anodized with hard drawn steel spring complete all as specified and as directed. 50.00 Each
86 Supply and fixing of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. 30.00 Sqm
87 Supply and fixing of sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed. 25.00 Sqm
88 Material and labour for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 200.00 Sqm
89 Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 50.00 Sqm
90 Supply and fixing in repair of galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple complete all as specified and as directed. 100.00 Sqm
91 Supply and fixing in repair of sheet glass 3mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters complete all as specified and as directed. 150.00 Sqm
92 Supply and fixing of 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in, cup board shelves etc including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed. 90.00 Sqm
93 Supply and fixing of particle board 19 mm thick medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed with screws to timber frame work as in, cup board shelves etc. including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed. 20.00 Sqm
94 Supply and fixing hasp and staple 100 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixing screws, complete all as specified and as directed. 15.00 Each
95 Supply and fixing in repair of continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified and as directed. 35.00 RM
96 Supply and fixing in repair of 150mm long extruded aluminium alloy handles, fabricated type, anodised complete as specified and directed . 35.00 Each
97 Supply and fixing (in repair) of hydraulically regulated door closer, aluminium (die cast ) body, design No.1 universal type suitable for shutters upto 700 width and of weight more than 35Kg complete all as specified and directed. 6.00 Each
98 Material and labour for re-securing/ adjusting existing false ceiling grid any type and making required tightning to remove sag portion/ depression in false ceiling grid including replacement of missing sections / suspenders etc complete all as specified and directed. 30.00 Sqm
99 Supply and fixing in repair PVC sheet building boards fix or laid/inserted to timber/GI/Aluminium framework including preparation of surface and making good as in patch repairs complete all as specified and directed 20.00 Sqm
100 Supply and fixing in repair 12mm perforated particle board/tiles for insulation and accoustic purposes, 60 x 60 cm in size inserted to timber/GI/Aluminium framework including prepration of surface and applying two coats of OBD over a coat of primer on visible face of board in patches complete all as specified and directed 20.00 Sqm
101 Supply and fixing of 5 mm thick plain colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site with and including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and directed including taking down of existing wall lining, board or insulation board including cover fillets of any type and thick complete all as specified and as directed. 90.00 Sqm
102 Material and labour for repair related to welding in repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying welder and helper for welding n exc 2.5cm in length thickness of welded exc 6mm and n exc 9 mm in different locations complete all as specified and directed. 15.00 Each
103 Material and labour for repair related to welding in repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying welder and helper for welding exc 2.5cm and n exc 5.0cm in length thickness of welded exc 6mm and n exc 9 mm in different locations complete all as specified and directed. 10.00 Each
104 Supply and fixing of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. 50.00 Kg
105 Supply and fixing of powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc; complete all as specified and as directed. 10.00 Sqm
106 Supply and fixing of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. 25.00 Sqm
107 Supply and fixing of 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and directed. 21.00 Sqm
108 Supply and fixing of wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. 20.00 Sqm
109 Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed. 0.50 cum
110 Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position of unframed/ framed work complete all as specified and directed. 1.00 Qtl
111 Supply and fixing of mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed. 175.00 Kg
112 Supply and fixing of sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door, 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type, 125 Amps, 25 KA as incomer and MCBs as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs/thimbles/glands and making good the disturbed surface matching with existing surface including taking down existing unserviciable MCCB/DBs including MCBs complete all as specified and directed. NOTE for item Nos 49.00 to 52.00 : - MCCB's/MCB's used in these DB's should be same as per makes of DB's. 1.00 Each
113 Supply and fixing in repair sheet metal enclosures distribution board for TPN, (MCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 43 protection, with shrouded neutral bar and insulated bus bar and earth link, suitable for MCB 4 pole as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed. 1.00 Each
114 Supply, installation, testing of SPN distibution board 12 way,double door , IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed. 2.00 Each
115 Supply, installation, testing of SPN distibution board 8 way,double door , IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed. 4.00 Each
116 Supply, installation, testing of SPN distibution board 4 way,double door , IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed. 2.00 Each
117 Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, including connection with suitable size copper lugs complete all as specified and directed. 22.00 Each
118 Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed. 44.00 Each
119 Supply and fixing of MCB single pole and neutral, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 16 to 32 Amps, including connection with suitable size copper lugs complete all as specified and directed. 4.00 Each
120 Supply and fixing of MCB single pole and neutral, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed. 4.00 Each
121 Supply and fixing in repair of sheet steel enclosure with separate busbar chamber for cable termination with and including MCCB four pole, 240 volts, 50Hz , breaking capacity 25KA, 125 Amps, thermal release type, complete all as specified and directed. 1.00 Each
122 Supply and fixing in repair of sheet steel enclosure with separate busbar chamber for cable termination with and including MCCB four pole, 240 volts, 50Hz , breaking capacity 25KA, 160 Amps, thermal release type, complete all as specified and directed. 1.00 Each
123 Supply and fixing in repair of MCB four pole, 240 volts, 50Hz , breaking capacity 10KA, 100A, B curve including connection with suitable size copper lugs complete all as specified and directed. 1.00 Each
124 Supply and fixing in repair of MCB four pole, 240 volts, 50Hz , breaking capacity 10KA, 40A to 63 Amps, B curve, including connection with suitable size copper lugs complete all as specified and directed. 1.00 Each
125 Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed. 290.00 Per Point
126 Material and labour for point wiring in existing conduit using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH PVC insulated and unsheathed stranded cable drawn through and including existing non metallic/mettalic heavy duty concealed/Surface conduit and including replacement of its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI flush boxes / sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over flush boxes /sunken boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/Bell Point controlled by one switch complete all as specified and as directed. NOTES : - (i) Point wiring & earth wire shall be connected to each & every flush/sunken box. (ii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. 100.00 Per Point
127 Description all as per item No 2.00 above but for socket out let point 5 Amps on same board complete all as specified and directed. 15.00 Per Point
128 Description all as per item No 2.00 above but for socket out let point 5 Amps on independent board complete all as specified and directed. 15.00 Per Point
129 Description all as per srl item No 2.00 above but point wiring for onesocket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed. 15.00 Per Point
130 Supply and fixing of modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. 16.00 Each
131 Supply and fixing of modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. 114.00 Each
132 Supply and fixing of modular switches, one way, 20 Amps, one module, 230 volt, AC supply, complete all as specified and directed. 15.00 Each
133 Supply and fixing of modular socket outlet 6 amps 5 pin combined 2 module, 230 volt, complete all as specified and directed. 30.00 Each
134 Supply and fixing of modular socket outlet 2 in 1, 6/20 amps, combined 2 module, complete all as specified and directed. 15.00 Each
135 Supply and fixing of fan regulator step type one module / 2 module, 120w 230 Volts, 50 Hz, AC complete all as specified and directed. 50.00 Each
136 Supply and fixing of modular blanking plate 1 module complete all as specified and directed. 10.00 Each
137 Material and labour for concealed point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 25 mm dia with FRLSH accessories, concealed and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and washers and making good the disturbed surfaces as per existing for one light/fan point/bell point controlled by one switch. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. 100.00 Per Point
138 Description all as per item No 17.00 above but for socket out let point 5 Amps on same board,complete all as specified and directed. 15.00 Per Point
139 Description all as per item No 17.00 above but for socket out let point 5 Amps on independent board,complete all as specified and directed. 15.00 Per Point
140 Description all as per item No 17.00 above but with 2.5 Sqmm cable for 3pin 15 Amps switch socket outlet (Power Point),complete all as specified and directed. 15.00 Per Point
141 Supply and fixing of bell push 5 Amps, flush type, single pole, one way, 230 volt, AC supply, ISI Marked, complete all as specified and directed. 10.00 Each
142 Supply and fixing of switch piano 5/6 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. 120.00 Each
143 Supply and fixing of switch piano 15 Amps flush type one way 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed. 15.00 Each
144 Supply and fixing of socket outlet 5 pin 6 amps, 230 volt. flush type, ISI Marked, complete all as speciied and directed. 30.00 Each
145 Supply and fixing of socket outlet 2 in 1, 5 /15 amps and multi pin flush type, complete all as specified. 15.00 Each
146 Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. 150.00 Each
147 Supply and fixing of fan regulator electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and directed. 50.00 Each
148 Supply and fixing of door bell electric ,ding dong /musical type, single phase 230 volts, ISI marked complete all as specified. 26.00 Each
149 Supply and fixing of lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified. 50.00 Each
150 Supply and fixing of in repair sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts complete all as specified and directed. 10.00 Each
151 Material and labour for taking down existing light fitting any type / size/make / capacity and refix the same after minor repair/ cleaning including replacement of connection wire with suitable size copper wire twin core flexible wire for connection from ceiling rose to light fitting all as specified and directed. 25.00 Each
152 Supply and fixing of channel for fixing of LED tube rod, in CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. Note : - (i) Tube rod shall be measured and paid for separately. (ii) Channel must be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact. 120.00 Each
153 Supply and fixing of 18 W/ 20W LED tube light two end contact, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. Note: - Tube rod must be get approved from Engr in charge to check fesibilty i.e. one end contact or two end contact for fixing in existing LED fittings. 120.00 Each
154 Supply and fixing LED luminaries of capacity 20 watt integrated aluminium batten with including oppal diffuser complete including removing of unservicable fitting of any type in any position complete all as specified and directed. 10.00 Each
155 Supply and fixing of decorative surface mounted LED mirror light fitting, aluminium housing with including 10 watt LED tube, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. 10.00 Each
156 Supply and fixing of bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. 15.00 Each
157 Material and labour for replacement of old unserviceable lamp any type with LED lamp 10 Watt with B 22 base cap and with opal diffuser, IP-20, Battery back-up complete all as specified and directed. 15.00 Each
158 Supply and fixing in repair bracket for security light made up of 40/50mm dia, 0.9 metre long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed. 10.00 Each
159 Supply and fixing of LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs and having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed. 5.00 Each
160 Supply and fixing of LED security light luminaire 45 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs and having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed. 5.00 Each
161 Supply and fixing of post top lantern LED 30W , cast aluminium spigot, with high effieient LED light, with poly carbonate diffuser, complete with high efficient LED lamp 30 W and accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down existing light fitting and removal complete all as specified and directed. 7.00 Each
162 Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings. 90.00 RM
163 Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.00 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.00 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings. 90.00 RM
164 Supply and fixing in repair of switch piano 5/6 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. 75.00 Each
165 Supply and fixing in repair of switch piano 15 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. 25.00 Each
166 Supply and fixing in repair of socket outlet 5 pin 6 amps, 230 volt. flush type, ISI Marked, complete all as speciied and directed. 20.00 Each
167 Supply and fixing in repair of socket outlet 2 in 1, 5 /15 amps and multi pin flush type, complete all as specified. 20.00 Each
168 Supply and fixing in repair of modular switches, one way, 6 amps one way single module, 230V, 50 Hz supply, with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and directed. 20.00 Each
169 Supply and fixing in repair of modular switches, one way, 20 amps one way single module, 230V, 50 Hz supply, with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and directed. 20.00 Each
170 Supply and fixing in repair of modular socket outlet 6 amps 5 pin combined combined universal socket 2 module, 230V, with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and directed. 15.00 Each
171 Supply and fixing in repair of modular socket outlet 2 in 1, 6/20 amps, combined combined universal socket 2 module, 230V, with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and directed. 15.00 Each
172 Supply and fixing in repair of heating element of capacity 2 KW (Round/Square) of geysers of any make ISI marked complete all as specified and directed. 55.00 Each
173 NOTE: - Amount of credit of Rs. for retrieved materials is mentioned in Schedule of Credit Page Nos. 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender.
Tender InquiryInquiry