- Home
- >
- Tender
- >
- Kerala Tender
- >
- Department of National Institute of Technology Calicut
- >
NTID 39808257
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Various Electrical Maintenance, Calicut - Tender Details
- Opening Date : Wed 16th April, 2025
- Closing Date : Mon 14th April, 2025
- ₹ 1221262.00
- NTID 39808257
Tender Description
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
24500.00 -
Document Cost
Refer Documents -
Estimated Cost
1221262.00
BOQ Items Total Items : 66 | Total Qty : 3497
# | Item | Quantity | Units |
---|---|---|---|
1 | Schedule Part A ( Balance Work of Rajpath streetlight) | ||
2 | Supplying and fixing of Hot dipped Galvanised tubular pole made from 3 mm thick sheet of overall length 23 Feet (7 mtr) with decorative arm bracket of 1 m length, ( Lamp inclination at 15 ) (Model is attached with estimate), 48mm dia x 3.25mm thick with standard arm cap. The bottom dia of the pole shall be minimum 139 mm and top 89 mm with inbuilt cable loop in loop out box with flush door and locking facility. The pole shall be with base plate minimum of 200x200x12mm and 4 Nos M20 x 750 mm size of foundation bolt. The pole shall be mounted on suitable size foundation and provided with 6A SP C curve MCB, loop in loop out 3 phase terminals block, required dia DWC pipe in the foundation for taking cable in & out from the pole, 3Cx1.5 sqmm unarmoured PVC insulated round copper cable from loop in loop out box to light fixture etc with all required accessories. (The cost of the civil foundation is not considered in this item. )(T lite- Onleo Steppo OLP-A4D/Equivalent)- Double Arm | 11.000 | Nos |
3 | Charges for concreting with 45 x 45 x 100 cm up to ground level and 40 cm above ground level using 8 mm steel reinforcement as per drawing with cement concrete of 1:2:4, after excavation and plastering the sides including a neat cement flushing coat, painting with cement paint etc, as required. | 5.000 | Nos |
4 | Supply, installation, testing and commissioning of high quality integrated LED street light fitting of 72 W , The housing should be of non-corrosive high pressure die cast aluminium with heat resistant toughened clear glass fixed with SS screws for with standing extreme environments . It should have corrosion resistant powder coating to pass NSS of 500 Hrs with PF > 0.95. Lifetime of 50K hours @ L70. Product should be suitable for continuous operation (10-12 Hrs. per day). The ingress protection should be minimum IP 66 with an IK rating of 07 for LED and control gear compartments. The LED used in the luminaire should be SMD type only of make - CREE LED / LGIT / Lumileds / Equivalent, colour temp-5700K 300K with SDCM of <5 and CRI : 70, Lens make- Led link/equivalent, Efficacy = 120 Lm / watt or higher, THD < 20%, Driver with protection against over voltage & short circuit. The luminaire should have a 20 KV/10KA SPD duly bolted in the luminaire. The input AC voltage range 140-310V AC, side entry mounting for 50 to 65 mm OD bracket, maintenance access to driver from the top, The LED Luminaire should be tested and approved by NITC before commissioning, etc as required. (Philips BRP062 LED 84 CW SLC S1 PSU / Equivalent) | 17.000 | Nos |
5 | Supplying of one number 2C x 6 Sq.mm size Aluminium conductor XLPE insulated PVC sheathed Armoured power cable of 1.1 kV grade etc. as required. | 300.000 | mtrs |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054