Facebook
Description

Tirupathur District - Jjm 2022-23 Providing Fhtc At Manavalli Panchayat In Kandhili Block, Package No.41

Tendering Authority: Department of Rural Development and Panchayats

India, Tamil Nadu, Tirupathur

NTID

28638738

Last Date For Submission

28 Sep, 2022

Closing Date

28 Sep, 2022

BOQ Items
# Item Quantity Units
1 1.Providing Pipeline Distribution system with Functional House hold Tap Connection @Thennmarathu Kottai H/O Manavalli
2 Providing FHTC
3 HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for , 3/4 &1 clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm 49.00 Each
4 Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 49.00 Each
5 Supply and Delivery of following sizes of Domestic Ball Driven Flow control valve with external BSP threaded ends, Stainless steel Body as per ANSI 304 Grade, Stainless ssstel Ball as per ANSI 304 Grade, ( to be tested in NABL Accredited lab) Flow regulated through the ball inserted in the flow path for the designed average flow rate from 3 meter to 8 meter inlet pressure head (FCRI, Palakad, Flow test must be furnished) excluding taxes, including Tranportation etc., 49.00 Each
6 Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm) 49.00 Each
7 Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 98.00 Each
8 Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 49.00 Each
9 Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 49.00 Each
10 MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm 294.00 Rm
11 Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm) 294.00 Cum
12 Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber 294.00 Rm
13 Supply & Jointing 20 mm SS/brass tap (Local rate) 49.00 Each
14 U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm 49.00 Each
15 Cutting of old BT/WBM road for laying the 20mm pvc pipe 1.94 Cum
16 Labour charges for Drilling,Cutting and fixing ferrules in distribution line 49.00 Each
17 Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc 147.00 Each
18 cutting MDPE Pipes and specials true axis and finishing the end complete 294.00 Each
19 Supply and delivery of 20 mm GI pipe B class and fixing in wall with required clamp 58.80 Rm
20 Supply and delivery of 25 mm GI Elbow for tap connection etc 49.00 Each
21 Supply and delivery of 25 mm GI Coupling for tap connection etc 98.00 Each
22 Supply and delivery of 20 mm x 15 mm GI Reduced Nipple for tap connection etc 49.00 Each
23 Supply and delivery of 20 mm GI Coupling for tap connection etc 49.00 Each
24 Towards the cost of welding charges tap to GI Coupling etc 49.00 Each
25 Providing Extention of Delivery Pipe Line
26 75 mm PVC Pipe(Distribution) 4Ksc 750.00 Rm
27 75 mm PVC bend 10.00 Each
28 75mm PVC Tee 6.00 Each
29 75 mm end cap 1.00 Each
30 MTA 1.00 Each
31 75mm PVC Gate valve 1.00 Each
32 Solvant solution 4.00 Each
33 Earth work excavation and depositting on bank with an initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed small sized boulders and hard gravelly soil,stacking and spreading as directed, manual dewatering and excluding backfilling etc. complete 405.00 Cum
34 Laying and jointing the PVC pipes & specials into trench 750.00 Rm
35 Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers. etc., complete 405.00 Cum
36 Provision for water meter 50 mm , 1.00 Each
37 Dirt box 1.00 Each
38 Errction Charges 1.00 Each
39 Construction ofIndividual House hold Fountain Tap
40 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 1.97 cum
41 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.97 cum
42 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 5.25 sqm
43 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 0.98 cum
44 Brick work in cm 1:5 mix using country brick including cost and conveyance etc. 2.18 cum
45 Plastering in CM 1:5mm thick for platform and sides including cost and conveyance etc. 68.09 sqm
46 Towards the cost of painting and lettering of JJM Tap Number etc 35.00 Each
47 Construction of Ball valve Chamber
48 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 2.48 cum
49 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 0.99 cum
50 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 30.38 sqm
51 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 1.05 cum
52 Supplying and fabrication of steel [lacing in position for Ball valve chamber box including cost and conveyance etc. 112.70 Kg
53 Material Component
54 90mm PVC 6 KSC 225.00 Mt
55 90mm Bend 5.00 No
56 Earth work excavation and depositing on bank with initial lead and lifr in all soil (30mx0.60mx1.05m) 141.75 Cum
57 Laying and jointing the PVC pipes & specials into trench 225.00 Mt
58 Refilling the trench with excavated laying the pipe 141.75 Cum
59 Restoration of the cutting portion of CC/BT road
60 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.14 cum
61 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 0.91 cum
62 Provision for Name board 1.00 Each
63 2.Providing Pipeline Distribution system with Functional House hold Tap Connection @ Parai Vattam H/O Manavalli
64 Providing FHTC
65 HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for , 3/4 &1 clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm 51.00 Each
66 Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 51.00 Each
67 Supply and Delivery of following sizes of Domestic Ball Driven Flow control valve with external BSP threaded ends, Stainless steel Body as per ANSI 304 Grade, Stainless ssstel Ball as per ANSI 304 Grade, ( to be tested in NABL Accredited lab) Flow regulated through the ball inserted in the flow path for the designed average flow rate from 3 meter to 8 meter inlet pressure head (FCRI, Palakad, Flow test must be furnished) excluding taxes, including Tranportation etc., 51.00 Each
68 Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm) 51.00 Each
69 Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 102.00 Each
70 Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 51.00 Each
71 Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 51.00 Each
72 MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm 306.00 Rm
73 Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm) 306.00 Cum
74 Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber 306.00 Rm
75 Supply & Jointing 20 mm SS/brass tap (Local rate) 51.00 Each
76 U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm 51.00 Each
77 Cutting of old BT/WBM road for laying the 20mm pvc pipe 1.94 Cum
78 Labour charges for Drilling,Cutting and fixing ferrules in distribution line 51.00 Each
79 Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc 153.00 Each
80 cutting MDPE Pipes and specials true axis and finishing the end complete 306.00 Each
81 Supply and delivery of 20 mm GI pipe B class and fixing in wall with required clamp 61.20 Rm
82 Supply and delivery of 25 mm GI Elbow for tap connection etc 51.00 Each
83 Supply and delivery of 25 mm GI Coupling for tap connection etc 102.00 Each
84 Supply and delivery of 20 mm x 15 mm GI Reduced Nipple for tap connection etc 51.00 Each
85 Supply and delivery of 20 mm GI Coupling for tap connection etc 51.00 Each
86 Towards the cost of welding charges tap to GI Coupling etc 51.00 Each
87 Providing Extention of Delivery Pipe Line
88 75 mm PVC Pipe(Distribution) 4Ksc 548.00 Rm
89 75 mm PVC bend 8.00 Each
90 75mm PVC Tee 5.00 Each
91 75 mm end cap 2.00 Each
92 MTA 1.00 Each
93 75mm PVC Gate valve 3.00 Each
94 Solvant solution 3.00 Each
95 Earth work excavation and depositting on bank with an initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed small sized boulders and hard gravelly soil,stacking and spreading as directed, manual dewatering and excluding backfilling etc. complete 295.92 Cum
96 Laying and jointing the PVC pipes & specials into trench 548.00 Rm
97 Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers. etc., complete 295.92 Cum
98 Provision for water meter 50 mm , 1.00 Each
99 Dirt box 1.00 Each
100 Errction Charges 1.00 Each
101 Construction ofIndividual House hold Fountain Tap
102 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 2.25 cum
103 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 2.25 cum
104 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 6.00 sqm
105 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 1.13 cum
106 Brick work in cm 1:5 mix using country brick including cost and conveyance etc. 2.49 cum
107 Plastering in CM 1:5mm thick for platform and sides including cost and conveyance etc. 77.82 sqm
108 Towards the cost of painting and lettering of JJM Tap Number etc 40.00 Each
109 Construction of Ball valve Chamber
110 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 2.58 cum
111 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.03 cum
112 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 31.62 sqm
113 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 1.10 cum
114 Supplying and fabrication of steel [lacing in position for Ball valve chamber box including cost and conveyance etc. 117.30 Kg
115 Restoration of the cutting portion of CC/BT road
116 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.14 cum
117 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 0.91 cum
118 Provision for Name board 1.00 Each
119 3.Providing Pipeline Distribution system with Functional House hold Tap Connection @Mavukkan Vattam H/O Manavalli
120 Providing FHTC
121 HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for , 3/4 &1 clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm 64.00 Each
122 Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 64.00 Each
123 Supply and Delivery of following sizes of Domestic Ball Driven Flow control valve with external BSP threaded ends, Stainless steel Body as per ANSI 304 Grade, Stainless ssstel Ball as per ANSI 304 Grade, ( to be tested in NABL Accredited lab) Flow regulated through the ball inserted in the flow path for the designed average flow rate from 3 meter to 8 meter inlet pressure head (FCRI, Palakad, Flow test must be furnished) excluding taxes, including Tranportation etc., 64.00 Each
124 Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm) 64.00 Each
125 Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 128.00 Each
126 Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 64.00 Each
127 Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 64.00 Each
128 MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm 384.00 Rm
129 Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm) 384.00 Cum
130 Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber 384.00 Rm
131 Supply & Jointing 20 mm SS/brass tap (Local rate) 64.00 Each
132 U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm 64.00 Each
133 Cutting of old BT/WBM road for laying the 20mm pvc pipe 2.91 Cum
134 Labour charges for Drilling,Cutting and fixing ferrules in distribution line 64.00 Each
135 Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc 192.00 Each
136 cutting MDPE Pipes and specials true axis and finishing the end complete 384.00 Each
137 Supply and delivery of 20 mm GI pipe B class and fixing in wall with required clamp 76.80 Rm
138 Supply and delivery of 25 mm GI Elbow for tap connection etc 64.00 Each
139 Supply and delivery of 25 mm GI Coupling for tap connection etc 128.00 Each
140 Supply and delivery of 20 mm x 15 mm GI Reduced Nipple for tap connection etc 64.00 Each
141 Supply and delivery of 20 mm GI Coupling for tap connection etc 64.00 Each
142 Towards the cost of welding charges tap to GI Coupling etc 64.00 Each
143 Providing Extention of Delivery Pipe Line
144 75 mm PVC Pipe(Distribution) 4Ksc 358.00 Rm
145 75 mm PVC bend 5.00 Each
146 75mm PVC Tee 2.00 Each
147 75 mm end cap 1.00 Each
148 MTA 1.00 Each
149 75mm PVC Gate valve 2.00 Each
150 Solvant solution 2.00 Each
151 Earth work excavation and depositting on bank with an initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed small sized boulders and hard gravelly soil,stacking and spreading as directed, manual dewatering and excluding backfilling etc. complete 193.32 Cum
152 Laying and jointing the PVC pipes & specials into trench 358.00 Rm
153 Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers. etc., complete 193.32 Cum
154 Provision for water meter 50 mm , 1.00 Each
155 Dirt box 1.00 Each
156 Errction Charges 1.00 Each
157 Construction ofIndividual House hold Fountain Tap
158 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 2.25 cum
159 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 2.25 cum
160 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 6.00 sqm
161 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 1.13 cum
162 Brick work in cm 1:5 mix using country brick including cost and conveyance etc. 2.49 cum
163 Plastering in CM 1:5mm thick for platform and sides including cost and conveyance etc. 77.82 sqm
164 Towards the cost of painting and lettering of JJM Tap Number etc 40.00 Each
165 Construction of Ball valve Chamber
166 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 3.24 cum
167 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.30 cum
168 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 39.68 sqm
169 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 1.38 cum
170 Supplying and fabrication of steel [lacing in position for Ball valve chamber box including cost and conveyance etc. 147.20 Kg
171 Material Component
172 90mm PVC 6 KSC 100.00 Mt
173 90mm Bend 2.00 No
174 90mm Tee 2.00 No
175 Earth work excavation and depositing on bank with initial lead and lifr in all soil (30mx0.60mx1.05m) 63.00 Cum
176 Laying and jointing the PVC pipes & specials into trench 100.00 Mt
177 Refilling the trench with excavated laying the pipe 63.00 Cum
178 Restoration of the cutting portion of CC/BT road
179 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.71 cum
180 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 1.37 cum
181 Provision for Name board 1.00 Each
182 4.Providing Pipeline Distribution system with Functional House hold Tap Connection @ Kondappanaikkenpatty H/O Manavalli
183 Providing FHTC
184 HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for , 3/4 &1 clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm 114.00 Each
185 Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 114.00 Each
186 Supply and Delivery of following sizes of Domestic Ball Driven Flow control valve with external BSP threaded ends, Stainless steel Body as per ANSI 304 Grade, Stainless ssstel Ball as per ANSI 304 Grade, ( to be tested in NABL Accredited lab) Flow regulated through the ball inserted in the flow path for the designed average flow rate from 3 meter to 8 meter inlet pressure head (FCRI, Palakad, Flow test must be furnished) excluding taxes, including Tranportation etc., 114.00 Each
187 Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm) 114.00 Each
188 Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 228.00 Each
189 Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 114.00 Each
190 Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 114.00 Each
191 MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm 684.00 Rm
192 Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm) 684.00 Cum
193 Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber 684.00 Rm
194 Supply & Jointing 20 mm SS/brass tap (Local rate) 114.00 Each
195 U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm 114.00 Each
196 Cutting of old BT/WBM road for laying the 20mm pvc pipe 1.94 Cum
197 Labour charges for Drilling,Cutting and fixing ferrules in distribution line 114.00 Each
198 Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc 342.00 Each
199 cutting MDPE Pipes and specials true axis and finishing the end complete 684.00 Each
200 Supply and delivery of 20 mm GI pipe B class and fixing in wall with required clamp 136.80 Rm
201 Supply and delivery of 25 mm GI Elbow for tap connection etc 114.00 Each
202 Supply and delivery of 25 mm GI Coupling for tap connection etc 228.00 Each
203 Supply and delivery of 20 mm x 15 mm GI Reduced Nipple for tap connection etc 114.00 Each
204 Supply and delivery of 20 mm GI Coupling for tap connection etc 114.00 Each
205 Towards the cost of welding charges tap to GI Coupling etc 114.00 Each
206 Providing Extention of Delivery Pipe Line
207 75 mm PVC Pipe(Distribution) 4Ksc 285.00 Rm
208 75 mm PVC bend 3.00 Each
209 75mm PVC Tee 2.00 Each
210 75 mm end cap 2.00 Each
211 MTA 1.00 Each
212 75mm PVC Gate valve 1.00 Each
213 Solvant solution 2.00 Each
214 Earth work excavation and depositting on bank with an initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed small sized boulders and hard gravelly soil,stacking and spreading as directed, manual dewatering and excluding backfilling etc. complete 153.90 Cum
215 Laying and jointing the PVC pipes & specials into trench 285.00 Rm
216 Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers. etc., complete 153.90 Cum
217 Provision for water meter 50 mm , 2.00 Each
218 Dirt box 2.00 Each
219 Errction Charges 2.00 Each
220 Construction ofIndividual House hold Fountain Tap
221 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 4.50 cum
222 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 4.50 cum
223 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 12.00 sqm
224 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 2.25 cum
225 Brick work in cm 1:5 mix using country brick including cost and conveyance etc. 4.99 cum
226 Plastering in CM 1:5mm thick for platform and sides including cost and conveyance etc. 155.63 sqm
227 Towards the cost of painting and lettering of JJM Tap Number etc 80.00 Each
228 Construction of Ball valve Chamber
229 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 5.77 cum
230 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 2.31 cum
231 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 70.68 sqm
232 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 2.45 cum
233 Supplying and fabrication of steel [lacing in position for Ball valve chamber box including cost and conveyance etc. 262.20 Kg
234 Restoration of the cutting portion of CC/BT road
235 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 1.14 cum
236 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 0.91 cum
237 Provision for Name board 1.00 Each
238 5.Providing Pipeline Distribution system with Functional House hold Tap Connection @Thelugu Matrapalli H/O Manavalli
239 Providing FHTC
240 HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for , 3/4 &1 clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm 162.00 Each
241 Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 162.00 Each
242 Supply and Delivery of following sizes of Domestic Ball Driven Flow control valve with external BSP threaded ends, Stainless steel Body as per ANSI 304 Grade, Stainless ssstel Ball as per ANSI 304 Grade, ( to be tested in NABL Accredited lab) Flow regulated through the ball inserted in the flow path for the designed average flow rate from 3 meter to 8 meter inlet pressure head (FCRI, Palakad, Flow test must be furnished) excluding taxes, including Tranportation etc., 162.00 Each
243 Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm) 162.00 Each
244 Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 324.00 Each
245 Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 162.00 Each
246 Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm 162.00 Each
247 MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm 972.00 Rm
248 Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm) 972.00 Cum
249 Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber 972.00 Rm
250 Supply & Jointing 20 mm SS/brass tap (Local rate) 162.00 Each
251 U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm 162.00 Each
252 Cutting of old BT/WBM road for laying the 20mm pvc pipe 4.85 Cum
253 Labour charges for Drilling,Cutting and fixing ferrules in distribution line 162.00 Each
254 Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc 486.00 Each
255 cutting MDPE Pipes and specials true axis and finishing the end complete 972.00 Each
256 Supply and delivery of 20 mm GI pipe B class and fixing in wall with required clamp 194.40 Rm
257 Supply and delivery of 25 mm GI Elbow for tap connection etc 162.00 Each
258 Supply and delivery of 25 mm GI Coupling for tap connection etc 324.00 Each
259 Supply and delivery of 20 mm x 15 mm GI Reduced Nipple for tap connection etc 162.00 Each
260 Supply and delivery of 20 mm GI Coupling for tap connection etc 162.00 Each
261 Towards the cost of welding charges tap to GI Coupling etc 162.00 Each
262 Providing Extention of Delivery Pipe Line
263 75 mm PVC Pipe(Distribution) 4Ksc 558.00 Rm
264 75 mm PVC bend 8.00 Each
265 75mm PVC Tee 5.00 Each
266 75 mm end cap 2.00 Each
267 MTA 1.00 Each
268 75mm PVC Gate valve 2.00 Each
269 Solvant solution 3.00 Each
270 Earth work excavation and depositting on bank with an initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed small sized boulders and hard gravelly soil,stacking and spreading as directed, manual dewatering and excluding backfilling etc. complete 301.32 Cum
271 Laying and jointing the PVC pipes & specials into trench 558.00 Rm
272 Refilling the trenches with available excavated soil(other than sand) in layers of notmore than 15cm thick watering ,consolidating,complying with standard specification and as directed by TWAD Board Officers. etc., complete 301.32 Cum
273 Provision for water meter 50 mm , 2.00 Each
274 Dirt box 2.00 Each
275 Errction Charges 2.00 Each
276 Construction ofIndividual House hold Fountain Tap
277 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 5.96 cum
278 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 5.96 cum
279 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 15.90 sqm
280 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 2.98 cum
281 Brick work in cm 1:5 mix using country brick including cost and conveyance etc. 6.60 cum
282 Plastering in CM 1:5mm thick for platform and sides including cost and conveyance etc. 206.22 sqm
283 Towards the cost of painting and lettering of JJM Tap Number etc 106.00 Each
284 Construction of Ball valve Chamber
285 Earth work excavating and depositing on bank with initial lead of 10mm initial lift 2m in Hard stiff clay soil etc complete for open foundation as per SS 20 B 8.20 cum
286 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 3.28 cum
287 Supplying and errecting centering for sides and soffits including cost and conveyance etc. 100.44 sqm
288 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 3.48 cum
289 Supplying and fabrication of steel [lacing in position for Ball valve chamber box including cost and conveyance etc. 372.60 Kg
290 Restoration of the cutting portion of CC/BT road
291 Cement Concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges for mixing laying and compacting etc., complete 2.85 cum
292 Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour charges etc. 2.28 cum
293 Provision for Name board 1.00 Each
294 GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package} 1.000 GST Amount ( in Rupees)
Tender InquiryInquiry