“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Tender For The Work Of Erectio, Curchorem - Tender Details
Explore tender information for Tender For The Work Of Erectio in Curchorem, including eligibility, deadlines, and bid specifics.
Power And Electricity Department
Curchorem, Goa, India
NTID 39422544
Opening Date : Wed 12th March, 2025- Closing Date : Tue 11th March, 2025
- ₹ 3271507.00
- NTID 39422544
Tender For The Work Of Erection Of Pole Mounted 100kva Distribution Transformer Centre And Laying Of 11kv 3 Core, 300 Sq.mm Aluminium, Xlpe Insulated, Flat Wire Armoured Cable At Souzamol, Collem, Under The Jurisdiction Of Sub Div-iv, Div-vii, Curcho
Key Values: Document Cost: 1500.00 | EMD: 65430.00 | Estimated Cost: 3271507.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
65430.00 -
Document Cost
1500.00 -
Estimated Cost
3271507.00
BOQ Items Total Items : 109 | Total Qty : 4869.0725
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Material Cost (Materials which are shown under erection & which are not shown under material will be supplied departmentally. | ||
| 2 | Supply of RCC pole 9mtrs long 9meters long R.C.C. Pole conforming to IS standards as amended upto date. The Component used for pole shall conform to following IS amended upto date. Ordinary Port land cement 53 grade IS 12269 Aggregate IS 383-1970 Torsteel IS 1786-7985 MS bar IS 432 P 1&2-1982 The minimum ultimate transverse load of pole shall be 300Kg for 9mtr. RCC Pole respectively and factor of safety shall be 2.5. The pole shall be marked as per IS. The poles shall be tested as per IS 785 & 2905-1989 as amended upto date at the manufactures works in the presence of the departmental representative and test reports shall be furnished for acceptance. The poles will be accepted subject to passing of tests and verification of reinforcement and concrete after breaking one pole from each lot at cost of the manufacturer. | 3.00 | Nos |
| 3 | Supply of Cut point Channel 1.3 mtr long Cross arms shall be made of HDGI channel of size ISMC 75X40X7.3mm. hot dip galvanizing generally conforming to IS 2633/72 and dimensional confirm to CEE s drawing. The cross arm shall not be welded/joined at any place except as specified in the drawing. The cross arms shall be fitted horizontally on to the top end of the poles at a height conforming to the relevant I.E. Rules and utilizing suitable size of HDGI clamps, HDGI Nut & Bolts.The length of cut point cross arm should be 1.3 mtrs | 1.00 | Nos |
| 4 | Supply of HDGI top fitting 'x' arm channel (75 x 40mm) Supply & fixing of HDGI Top fitting cross arm ISMC channel,75x40mm,0.7mts long. The cross arms shall be fitted vertically onto the top end of the poles, at a height conforming to the relevant I.E. rules & utilizing suitable size of HDGI clamps & HDGI washers, HDGI nut bolts. | 1.00 | Nos |
| 5 | Supply of 11KV Disc insulators 45KN with metal parts upply & fixing of 11kv Disc insulators with metal parts 45KN 11 KV disc insulators ball and socket type, type A porcelain brown glazed duly cemented at factory with MCI socket cap, forged steel ball pin and supplied with Phosphor bronze W split pin as per IS 731-1971 as amended upto date. Minimum failing load. 45 KN.Pin ball diameter 16 mm. Minimum Creepage distance 320 mm. Ferrous parts shall be galvanized as per relevant IS. Insulator shall be marked as per IS. Acceptance tests and routine tests shall be carried out as per IS by the manufacturer and test results shall be furnished by the manufacturer before supply of materials.Department reserves the right to witness all the above tests. 3-bolted type hardware fitting suitable for 11KV ball and socket type disc insulators of 16mm pin, failing load of 45KN and suitable for ACSR WEASEL conductor. All iron parts should be hot dip galvanized as per IS:2629/1985 as amended upto date. Acceptance tests and routine tests shall be carried out by the manufacturer s works and test reports shall be furnished before supply of materials. Department reserves the right to witness the above testing | 3.00 | sets |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054