Tender for TECHNICAL EDUCATION AND TRAINING DEPARTMENT - NTID 25106959
TECHNICAL EDUCATION AND TRAINING DEPARTMENT
Bardhaman, West Bengal, India
NTID 25106959
- Opening Date : Wed 1st September, 2021
- Closing Date : Mon 30th August, 2021
- ₹ 0.00
- NTID 25106959
Supply Testing Installation And Commissioning Of Machinery Or Equipment Or Instrument Or Hand Tools Etc For Different Trade Courses Under Strive Project At Govt Industrial Training Institute Binpur Ii - (,1) Purchase New AC : 1.5 TON, 5 Star, for ICT Infrastructure(,1) Sanitary napkin disposal machine : For School / college (500 packet Storage capacity )(,1) BOOKS & LEARNING RECOURCES(,1) "Book : Fitter:Hydraulic and Pneumatic Technician"(,1) Book: Automotive service technician level -4(,1) Digital Library : Providing digital library facility for students so need a full setup of digital library server/website , (Domain & Hosting Purchase, E-Library Development(OPAC Patron facility), Purchase of E-Books, Maintenance & Security and other releted mandatory things to establish digital libiary)(,1) FITTER:HYDRAULIC & PNEUMATIC TECHNICIAN(,1) Square Try 10 Cm .Blade : 10 inch, As Per Industry standarda (ISO Certified)(,1) Caliper Outside 15 .Cm Size: Dia 300 mm, As Per Industry standarda (ISO Certified)(,1) Caliper Inside 15 .Cm : Insize dian 30-320 mm Inside Spring Caliper ,As Per Industry standarda (ISO Certified)(,1) "Divider 15.Cm.: Divider 15.Cm diaType - Spring DividerRange - 0-150mmSize(L) - 150mm, (ISO Certified)"(,1) "Straight Scriber 15.Cm : ""Straight Scriber 15.Cm.Material: SteelThickness: 2 to 5 mmOverall Length: 215-216 mm"", (ISO Certified)"(,1) "Screw Driver 15.Cm.: All type 15 cm Screw Driver (Like- Phillips Screwdriver, Insulated Screwdrivers, Torque Screwdrivers,Flathead Screwdriver,Tri-Wing Screwdriver,Pozidriv Screwdriver,Hex Screwdriver.) As per industry standards ( ISO Certified )"(,1) "Hammer Ball Peen 0.22 Kg.With Handle. Type of Product : Ball Pein HammerGrade : IS 841-1983Weight : 500 gms , ( ISO Certified )"(,1) "Hacksaw Frame Fixed 30 Cm: Hacksaw Frame Fixed 30 Cm with blade, Type of Product : Hacksaw Frame FixedBlade Size : 300 mmMaterial : Plastic Handle and sronge steel frameSize (Inch) : 6 InchPart No. : 941,, ( ISO Certified )"(,1) "Sefety Goggles:Frame Type : PVC with Woven Elastic StrapLens Material : PolycarbonateWeight (g) : 93 g, Industrial Saftey Goggles ( ISO Certified )"(,1) "Dot Slot Punch10 Cm: Point Diameter(Inch) : 10Overall Length (mm) : 1000Part No. : 1004Type of Product : Centre Punches, , ( ISO Certified )"(,1) Rule Steel 30Cm : Size : 30 cm/12", , ( ISO Certified )(,1) "Rule Steel 60Cm.:Size : 60 cm, ( ISO Certified )"(,1) Straight Edge 45 Cm.Steel.: Thickness: 2-5 mm. Hardness: 40-45 HRC, As per industry standards ( ISO Certified )(,1) Square Adjustable 15 Cm.Blade : 15 Cm.Blade , As per industry standards ( ISO Certified )(,1) Sprit Level 15 Cm. : 15 Cm , As per industry standards ( ISO Certified )(,1) Portable Hand Drill (Electric) 0 To 6Mm.: 10 mm chuc kMaximum Capacity In Wood Is 20 Mm. Professional Powerful Heavy Duty Electric. Maximum Capacity In Steel Is 10 Mm, As per industry standards(,1) "Taps And Dies Complete Set In Box B.A Set contains:9 pc dies set: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75, 1/8-279 pc taps: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75, 1/8-271 pc tap wrench1 pc die handle 1"" OD, As per industry standards ( ISO Certified )"(,1) "Feeler Gauge 10 Blade. Material: Steel,Item Dimension: 20 x 20 x 5.0 cm, ( ISO Certified )"(,1) File Set : File Set all type, Contents Hand, Flat, Half Round, Round, Square, Three Square Files, As per industry standards(,1) "Micrometer (Outside And Inside): Brand : InsizeType : Outside MicrometerMaterial : Stainless Steel With carbide measuring facesLeast Count : 0.001 mmBrand : Insize,Type : Outside MicrometerMaterial : Stainless Steel With carbide measuring facesLeast Count : 0.001 mm, As per industry standards ( ISO Certified )"(,1) Minimesh Coupling hoses with Pressure gauges of different ranges. : Recharge Measuring Hose 1.5m R134A Car Air Conditioning Refrigerant Pressure Gauge Recharge Charging Hose, As per industry standards ( ISO Certified )(,1) "Allen Keys-Sets. : Full Set, Material :High tensile steelSurface finish:Black oxide finishSizes Available:1.5, 2, 2.5, 3, 4, 5, 6, 8, 10As per industry standards ( ISO Certified )"(,1) "Standard Sets spanner/slide wrenches/screw drivers. Sales PackageSET OF 12 PCSCombination TypeOPEN & BOX ENDMaterial, As per industry standards ( ISO Certified )CARBON STEEL"(,1) "Gland nut Wrench- box type. : Fits hydraulic cylinders on vehicles with gland nuts from 2-Inch to 6-Inch / 51mm to 152mmReverses to work on 17/64-Inch or 21/64-Inch pinholesUse with 3/4-Inch square drive ratchet or breaker barPackage dimensions:20.828""L x 14.223999999999998""W x 2.286""H, As per industry standards ( ISO Certified )"(,1) "Flowmeters, Measuring Instruments,e.g.Screw guage,V.C.etc.: Operating Voltage: DC4.5 5V-24VOperating Current: 15 mA (DC 5V)External Threads: 1/2""High amplitude = 4.6VLow amplitude = 0.5V, As per industry standards ( ISO Certified )"(,1) "Hydraulic Tube/ Pipe Bender : Size (Inch) : 5/16 inchThickness : 8-25 mmType of Product :Tube BenderSize (mm) : 8 mm, As per industry standards ( ISO Certified )"(,1) "Pipe flaring /champering tool. : 1Pc 7 Dies Tubing Pipe Flaring ToolFlaring Tubes Multi Vise ToolRotating Angle 45 Tilt Angle 45Hole Size 1/2 , 7/16 , 5/16 , 1/4 , 3/16 , 3/8 , 5/8, As per industry standards ( ISO Certified )"(,1) "O-ring remover/fixer : Color BlackExtended Length 25.00 centimetersItem Weight 1.21 poundsPart Number DRS002Size SAEUNSPSC Code 31410000,, ( ISO Certified )"(,1) "O-ring making Kits : Brand Name LoctiteColor YellowContainer Size 50.0Ean 0079340001121Full Cure Time 6 secondsGlobal Trade Identification Number 00079340001121Lower Temperature Rating -50 degrees_fahrenh, ,, ( ISO Certified"(,1) Thread Chaser-gauge.: For industry uses , As per industry standards ( ISO Certified )(,1) Pipe Wrench-Different sizes: Pipe Wrench full set Pipe wrenches are usually sold in the following sizes (by length of handle): 10, 14, 18, 24, 36, and 48 inches, As per industry standards ( ISO Certified )(,1) "Pliers/Nose pliers for opening lock rings with holes: .Length (mm) : 127Length (inch) : 5Type of Product : Needle Nose Plier, As per industry standards ( ISO Certified )"(,1) TIG welding set for welding pipes. : TIG welding full set , Like- tig welding filler rod, gas cylinder with gas , regulator , pipe , and other extra mandatory tools or equipment regarding tig welding . ,As per industry standards ( ISO Certified )(,1) "Pneumatic air compressor : Fully Automatic Pneumatic air compressor with voltage stabilizer, Horse Power 10 HPMaximum Flow Rate 501 - 1000 cfmAir Quality Standard Class 0Lubrication Style OIL INJECTEDCooling Method Air CooledRental Available YesSpares Available YesIs It Portable YesInstallation/After Sales Service Available YesWarranty 1 YEARMotor 1 YEAR ( ISO Certified )"(,1) Temperature gun(Laser type) : GM320 Non Contact Laser LCD Display Digital Infrared (IR) Temperature Meter Gun -50°C to 330°C, for industry use , As per industry standards ( ISO Certified )(,1) Basic Hydraulic simulator : Use For Simulation(,1) "Basic electropeumatic simulator : Type of Product :Single Solenoid ValveWorking Presssure :10 kgf/cm2Temperature Range :5-50°C"(,1) "Hydraulic power pack, : type of Product : Hydraulic Bottle JackCapacity :50 TonMaximum Height :385 mm, As per industry standards ( ISO Certified )"(,1) "Accumulator set : Material HydraulicColor SilverPressure 315 PSIUsage Hydraulic SystemDesign BladderCapacities 1-4ltrGas Volume ltrOil Volume 40ltrMaximum Working Pressure 315, As per industry standards"(,1) "Dryer and FRL unit : Material SSStructure DiaphragmPressure Medium PressurePressure Setting Range 0 - 4 BarMax Working Temperature 60-90deg C, ( ISO Certified )"(,1) "Valve cut section (Hydraulic and pneumatic ) : Pressure High PressureMedia AirVoltage 240 VPower Source HydraulicFrequency 50 HzPhase Single Phase , As per industry standards ( ISO Certified )"(,1) AUTOMOTIVE SERVICE TECHNICIAN LEVEL -4(,1) Battery Charging cum tester : MULTI USE BATTERY CHARGER cum tester For Car Battery. Input Voltage 110-440 v, O/P VOLTAGE: 6-72 V, CHARGING CURRENT:1-100 A), With LCD Display , & Auto-cut System, (ISO Certify.)(,1) Sliding Hammer : Berli Steel Handle Slide Hammer RAM Bar,Sledge Hammer,1.5x50 inch (ISO Certify.)(,1) Hydraulic jacks : Hydraulic jacks (THREADED RAM HYDRAULIC JACK (101-1000 TON), As per industry standards ( ISO Certified )(,1) Vehicle safety stands: HYDRALIC FLOOR JACK,CAPACITY:3 TON,MINIMUM HEIGHE:140MM,MAXIMUM HEIGHT:470MM,As per industry standards ( ISO Certified )(,1) Hard toed boots : Puncture Resistant, Water Resistant, Anti-Skid, Anti-Static, Oil Resistant , As per industry standards ( ISO Certified )(,1) Air blow gun : (Tip: 4-1/2" ,Noise: 80 db ,Blowing Force at 100 PSI: 0.35 Kg , Air Consumption at 100 PSI: 15.18 cfm), As per industry standards ( ISO Certified )(,1) Hydro meter : (RESOLUTION:0.002GM/ML,LENGTH:250MM,MINIMUM SPECIFIC GRAVITY:1G/ML,MAXIMUM SPECIFIC GRAVITY:1.1G/ML), As per industry standards ( ISO Certified )(,1) "Diagnostic tool (genesis Evo) : G-Scan is the perfect fit for Blue Print and to compliment the original G-Scan, Blue Print are proud to introduce the G-Scan 2. This new unit comes complete with a builtin 4CH oscilloscope, digital multi-meter and secondary ignition scope. The G-Scan 2 enhances the diagnostic capability of the range and further cements the company's dedication to provide independent workshops with a 'Complete Solution for Asian & American Vehicles'.Super fast dual processor for high speed performance5.6"" colour touch screen plus a 12 button menu navigation systemFlight recording mode to record live data for later playback and analysisCAN Enabled without the need for an external module or adaptorEffortless software updates and great customer supportSupports communication with 24V Commercial VehiclesShows full DTC descriptionsMemo and screen grab functions - make notes on screen for later retrieval and printingNo software timeout4GB SD memory cardComes with a rechargeable Lithium Polymer battery, for hours of useMarket leading coverage for Asian cars and trucksSuper fast boot up in just under 10 secondsTwo year warranty and Two year free software updates, Infotech Component information Software and Automated System TestIncludes OBD II Smart cable, manuals, and carrying case. ( ISO Certified )* The li-ion battery and carry case are covered by a one year warranty.G-Scan 1 Lite Contents-Scan 1 Unit4GB SD CardDLC Main CableSD Card ReaderSelf Test AdapterPC Utility CDHard Carry Case"(,1) Air Hoses- 20mts, 1set4 colour hoses pipe type (SIMPLE SIX FEET) with Clip ,As per industry standards ( ISO Certified )(,1) "A/c Leakage Tester :Name of Gases Detected : Refrigerant GasesMeasurement Range: 0.99oz/yr to 0.25oz/yrPower Source : ElectricSensitivity: 0.25/0.50/0.99 oz per yearBattery Type : 9V BatteryIndication : Low Battery IndicationDisplay Type : Digital, As per industry standards ( ISO Certified )"(,1) "Pneumatic Tools : Type Pneumatic,Color- Green,Model Name :Super Duty Air Impact Wrench (One-Hand Reversing Switch),Material: Carbon Steel, Power Features: Power Requirement- 90,Maximium Torque - 1085 N m, Working Torque -1085 N m, Impacts per Minute - 5 ipmRevolutions per Minute- 8000 RPM,Operating Pressure- 90 psi, Convenience Features: Portable No:Dimensions- Square Drive,3/4 inchHeight- 7.4 cmWeight-2.36 kg As per industry standards ( ISO Certified )"(,1) Bench Grinder: (Collet Size: 150x16x12.7 mm , No Load Speed: 2950 , Rated Power Input: 285 , TG63PH 440v (1ph)), As per industry standards ( ISO Certified )(,1) Fender covers : (Protects the vulnerable areas of the bodywork (front grill, fender, headlights, car make badges, bumper) Unique wheel access : allows servicing of brakes, suspension. Transparent front lamp sections allow lighting tests. Radiator section with nylon mesh allows for stationary motor testing without the risk of overheating.), As per industry standards ( ISO Certified )(,1) Vehicle support Stands : (Pair of 6-ton jack stands with 5443 kgs capacity total (when used together),Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment , As per industry standards ( ISO Certified )(,1) Cotton gloves : Industrial Leather Hand Gloves Standard Size , ESD Safe(,1) Gear Knob covers : Silicon,16.7 x 11.2 x 5.5 cm, Esd Safe, ISO Certified(,1) "Car seat covers : 4 Seat Car Seat Cover with assembly and disassembly tool with dustproof,waterproof, softness fabrics, cool fabrics, best quality "(,1) Steering covers : Rexine,UNIVERSAL, As per industry standards ( ISO Certified )(,1) Post lift : 2 Post lift , Type of Product: Two Post Lift , Lifting Capacity: 4 Ton , Power: 3.0 HP , Frequency: 50Hz , Phase: 1 Phase,3 Phase , Overal height: 2844 mm , Bay width: 3419 mm , Lifiting time: <45 second , Lengh: 712mm 1462mm , Lifting arm adjust: Front, Rear , Inside column: 2799 mm, As per industry standards ( ISO Certified )(,1) Torque wrenches : Type of Product: Torque Wrenche , Sub Type: Ratchet , Torque Range in Nm: 540-1380 , Least Count for Nm Range: 40 , Torque Range in Lb-Ft.: 400-1000 , Least Count for Lb-Ft. Range: 20 , Torque Range Capacity in Kg. m: 55-140 , Least Count for Kg-m Range: 5 , Type of Drive: Square , Drive Size: 1 Inch , Overall Length at Min. Capacity: 1470 mm , Head Width: 100 mm , Head Depth: 84 mm , Weight: 18.8 Kg, As per industry standards ( ISO Certified )(,1) Safety goggles : UV Protection 100%, Nylon,Framed, Wraparound Spectacle Adjustable Temple Length Flexible Nose Pad and Temples,Scratch Resistant,Impact , ( ISO Certified )(,1) Parts washing station: Automatic system , POWER:10-24 KW,WEIGHT:100-1000 KG,3 PHASE,DIAMETER:250-1300 MM BASKET,MANUA,, As per industry standards ( ISO Certified )(,1) "Wheel aligner : Voltage: 220 V ,Max Rim Diameter: 11 to 24 Inch ,Phase: Single ,Power: 0.24 kW ,Wheel Base: 1200/4000 mm ,Frequency: 50 Hz ,Wheel Track :1100/1800 mm ,Axial Distance : 1200 to 4000 mm ,Column Height : 2 to 8 m ,Lift Installation : 1900 to 2400 mm ,Pit Installation : 800 to 1300 mm), As per industry standards ( ISO Certified )"(,1) Pullers : 12 PCS BEARING SEPARATOR SET BEARING REMOVAL TOOL SET BAR-TYPE SPLITTER GEAR PULLER FLY WHEEL TOOL KIT 35-50MM 50-75MM, As per industry standards ( ISO Certified )(,1) "Air compressor : Capacity :10 bar ,Compressor Technology :Reciprocating Compressor ,Power: 10 HP ,Output Pressure : 8-10 Bar ,Air Tank Capacity : 150/200L), auto load safty , with ouput regulater , As per industry standards ( ISO Certified )"
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
60000.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane