Tender for TECHNICAL EDUCATION AND TRAINING DEPARTMENT - NTID 25106968
TECHNICAL EDUCATION AND TRAINING DEPARTMENT
Bardhaman, West Bengal, India
NTID 25106968
- Opening Date : Wed 1st September, 2021
- Closing Date : Mon 30th August, 2021
- ₹ 0.00
- NTID 25106968
Supply Testing, Installation And Commissioning Of Machinery Or Equipment Or Instrument Or Hand Tools Etc For Different Trade Courses Under Strive Project At Govt Industrial Training Institute Manbazar(,1) Sanitary napkin disposal machine : For Scholl / college (500 packet Storage capacity )(,1) Sports & Gym Equipment : Full size short handle dews bat -2 No., Harrow dews bat-2 No., Tennis bat-4 No., Lather ball-6No., Batting pads-4set, Leg pads-4set, Hand gloves-4set, wicket keeping gloves-2set, Elbow guard-4set,Abdomen guard-4set, Thigh guard-4set, Arm guard-4set,Chest guard-4set, Helmet-8No., Tennis ball for cricket-12No., Bat handle grip-12No.,Cricket wicket set-8set,Cricket jersey-22set, Football-6No., Football goal post net-6No., Football jersey-22 set, Volley ball (400gm-450gm)-6No.,Volley ball net-4No., Volley ball jersey-12set, Badminton racket-12 no., Shuttle cock-24No.,-Badminton net-4 No., Carrom board-(26 INCH)-1 No, Carom board-(20inch)., Carrom coin-4set, Carrom board Striker-10No. , Gym Equipment-Adjustable bench , Barbell stand, Cable Crossover or Functional Trainer, Dumbbells stand. Decline Bench press: Exercise ball, Flat bench press, Indoor Rower, Incline bench press, Lat Pulling Down, LKey Dumbbells, Leg Press Hack Squad hammer, Leg Curl Extension, Olympic bar, Preacher Curl bench, Rubber coated Premium weight, Smith machine, Weight plate stand, Treadmill, Gym bike, Elliptical trainer, Capsule pipe, Machines with pulley, Cable cross, Functional Trainer, Smith machine with a functional trainer, Hack squat, Hammer single station, Plates, Dumbbells, Gym accessories: For the 4 station multigym, For the 6 station multigym, For the 10 station multigym, For the 12 station multigym, For the 16 station multigym(,1) "Water Cooler: Storage capacity (up to float valve level) -80 liter, Capacity with comfort level Water outlet tempat 170C + 10C at rated condition60 LPH, Operating power supply230+10%VAC,50Hz,1PH, Thermal insulation for storage tank PUFNo. of faucets 2No. of cold water faucets 1No. of normal water faucets 1Recommended maximum water flow ratethrough the faucets in LPM1.5, with UV System"(,1) BOOKS & LEARNING RECOURCES(,1) "Book : CNC Setter cum Operator - Turning "(,1) Book: Hydraulic and Pneumatic Technician(,1) Digital Library : Providing digital library facility for students so need a full setup of digital library server/website , (Domain & Hosting Purchase, E-Library Development(OPAC Patron facility), Purchase of E-Books, Maintenance & Security and other releted mandatory things to establish digital libiary)(,1) CNC Setter cum Operator - Turning(,1) Thread plug gauge M8 x 1.25, M10 x 1.5 : SG-M8 X1.25-PJ Standrad screw gauge(SG)Metric (M) Screw J class set Plug from OSG, Material OHNS ( ISO CERTIFIED)(,1) Plug gauge 10, 16 dia. : Thread Plug Gauge Size Dia 10 & 16 Matrial OHNS (ISO CERTIFIED)(,1) Ring gauge for setting bore dial gauge – 30 dia. : Thread Ring Gauge Dia -30mm Matrial OHNS (ISO CERTIFIED)(,1) Soft jaws : Soft jaw for CNC Machine use dia 170 ot 200 mm(,1) Scrap Box : Scrap Box - Use for Industrial ,Type -House Keeping Trolley,Metrial- Mild Steel, Load Capacity- 100 Kg, Colour- AnyWheel- Four Wheel,Feature- Corroosion resistance ( ISO Certified )(,1) Feeler gauge for work offset setting : Stainless Steel Feeler Gauge Metric Offset Valve Thikness Gauge 17-Piece, Blad Tool for Measuring Gap width/Thickness 300mm/11.8'' Long (ISO CERTIFIED )(,1) Micrometer – external, 0-25 mm, 25 -50 mm, 50 – 75 mm. : Standard make Micrometer external (0-25 MM)-1no 25-50mm -1 no. & 50 - 75mm-1no. With (ISO CERTIFIED Copy and test copy )(,1) Vice : Size 6 , Width of Jaw (in mm ) 125 , Opening of Jaw (in mm ) 150 , Depth of Jaw ( in mm ) 30 , Overall Length ( in mm ) 490 , Overall height (in mm ) 215 , Approx. Weight ( in Kg 26) (ISO CERTIFIED Copy and test copy )(,1) Generator Set : Generator Ratiog -25 KVA,3Ph,4 Wire output Engine Power (Net) - 33 BHP or more Rated Speed --- 1500 RPM Frequency-------------50Hz Strock ------------125 mm or more Cooling -------Air , Fule --Diesel , Noise level---Silent or sound prof. Tank Capacity - 30 Ltrs Minimum (,1) Lever dial for work offset setting : Standard Make in ISO Certified copy Level Dial Matrial - Stainess steel,Precision Meter Type - Analog, Plunger Dial Gauge--0.8 mm to 30 mm/0.08 deg to 1 deg., Range 0.8mm ./0.08 inch with Magnetic Stand (,1) Radius gauge : Standard type Precision Radius Gauge (15.5-25mm) with Tested Certified(,1) Thread pitch gauge : Standrad Type precision steel Screw Pitch Gauge with Tested Certified(,1) Inside caliper for measuring ID grooves : inside Groov Vernier/Digital Inside Groov Caliper JAW LENGTH 50MM (6''x0.001''/10-150x0.01mm) with Tested Certified(,1) First aid kit : As per Industrial roule Frist Aid Box with medical kit.(,1) "Industrial grade CNC Turning Center & cutting tools :- Make & Model: (1) Work Area Dimensions: 1.1 Swing over bed: Not less than 400 mm, 1.2 Distance between centres: Not less than 300 mm,1.3 Maximum turning dia.: Not less than 200 mm, 1.4 Maximum Turning Length: Not less than 400 mm.(2)MAIN SPINDLE: 2.1 Spindle nose: A2-5 or better, 2.2 Bore through spindle: Not less than 42 mm, 2.3 Maximum Bar capacity: Not less than dia. 25 mm,2.4 Spindle Speed range : 50-4000rpm or better,2.5 Spindle motor power (Continious rating/30 mins rating): Minimum 7 kW/10.5 Kw or better,2.6 Chuck size: Not less than 150 mm.(3)AXES SLIDES:3.1 X-axis Travel: Not less than 150 mm, 3.2 Z-axis Travel: Not less than 400 mm,3.3 Rapid traverse rate:X-axis: Not less than 20 m/min,3.4 Rapid traverse rate:Z-axis : Not less than 20 m/min,3.5 Feed rate : Not less than 10 m/min.(4)TURRET:4.1 Turret Type : Servo Turret,4.2 No.of station: Minimum 8 Nos ,4.3 Maximum Boring bar dia.: 40mm or more,4.4 OD turning tool size: Not less than 25mm x 25mm.(5)TAIL STOCK:5.1 Tail stock Base travel: Not less than 200mm,5.2 Tail stock Quill travel: Not less than 100mm,5.3 Tail stock Quill diameter: Not less than 80 mm,5.4 Quill Taper: Minimum MT-4,5.5 Quill thrust : Minimum 300 kgf @ 12 kg/cm2 bar pressure. (6)CONFIGURATION: 6.1 CNC CONTROL SYSTEM: Sinumeric 828D or better from Siemens,6.2 BED TYPE: Slant/Integral,6.3 GUIDE WAYS: High precision roller LM (Linear motion) guides ways or better. (7)ACCURACIES : 7.1: POSITIONING- X- AXIS: 0.010 mm or better,Z - AXIS: 0.010 mm or better,7.2: REPEATABILITY-X- AXIS: 0.006 mm or better,Z - AXIS: 0.006 mm or better,7.3 Run out: 0.005 mm or better. (8) COOLANT SYSTEM:8.1 Tank capacity: Suitable as per the machine. (9) LUBRICATION:9.1 Central lubrication: Automatic lubrication for roller guide ways, ball screw,9.2 Hydrulic power pack: Not less than 32 ltr,9.3 System Pressure: Not less than 30 kg/cm2. (10) STANDARD FEATURES: 10.1 Stress relieved casting for headstock and bed, 10.2 Hardened and ground Linear Motion guide ways,10.3 Spindle encoder for thread cutting operation,10.4 Hydraulic operated 3 Jaw chuck with one set of hard & soft jaw,10.5 Minimum 8 station Servo bi-directional Turret,10.6 Tailstock with hydraulic operated quill,10.7 Slant/Integral type bed and LM guide ways for axis,10.8 Coolant tank ,10.9 Chip Tray,10.10 Foot switch for Chuck & Tailstock,10.11 AC spindle Drive and axis drive,10.12 Auto and manual coolant system,10.13 Closed pitch ball screw, supported at both ends, pre tensioned preferable,10.14 Automatic centralised oil lubrication for guide ways and ball screw . (11)STANDARD ACCESSORIES :11.1 Electronic hand wheel (manual pulse generator),11.2 Built in lighting system,11.3 Boring bar holder (4 nos.),11.4 Set of reduction sleeves,11.5 :3 jaw hydraulic chuck dia 150mm (min),11.6 Programmable quill,11.7 Full machine guard,11.8 Coolant system,11.9 Maintenance tool kit ,11.10 AC Spindle (Cartridge),11.11 AC Spindle Drive (Sinumeric make),11.12 AC Servo Axes Drive (Sinumeric make),11.13 Automatic programmble Centralised Oil Lubrication System,11.14 Chip Tray to be provided,11.15 Levelling screws and Mounting pads,11.16 Machine operating manual and programming manual – 2 sets,11.17 One set of installation, maintenance and spare parts manual ,11.18 Hard Jaws & Soft jaws 4 sets each,11.19 Taper shank drill sleeves (MT1,MT2,MT3),11.20 OD Tool holder clamping block,11.21 Door safety interlock,11.22 Fully enclosed splash guard with sight windows,11.23 Fully encapsulated housing with safety type window,11.24 Leveling pads. (12)STANDARD CONTROL FEATURES:12.1 8.4'' or better color display,12.2 Manual data input,12.3 Alarm/ operation history display,12.4 Self diagnostics function,12.5 Constant surface speed control,12.6 Continious Thread cutting cycles,12.7 Feed rate override,12.8 RS 232 interface/Ethernet/USB/LAN Port,12.9 External memory and sub programme calling function,12.10 Backlash compensation,12.11 512 kb Part Programme storage memory,12.11 512 kb Part Programme storage memory,12.12 Background editing,12.13 Memory card input/ output,12.14 Hourly part count,12.15 Colour graphics display,12.16 Dynamic Simulation Display,12.17 Panel AC. (13)Documentation:13.1 Machine Manuals : (i)Mechanical maintenance manual 2 sets each (one hard copy and one soft copy), (ii)Electrical maintenance manual 2 sets each (one hard copy and one soft copy), 13.2 Detailed Layout plan,13.3 Operating and Programming Instruction,13.4 Installation and Commissioning instructions,13.5 Quality Test and Accuracy Test Chart Records,13.6 Circuit Diagrams,13.7 Maintenance / Repair Charts,13.8 Preventive Maintenance Instructions,13.9 Lubrication Chart & Lubricant list,13.10 Instruction manual for supplied Coolant Concentrate and Coolant Maintenance,13.11 Detailed packing list of all Items and devices and detailed prospect of machine & all other Accessories to be enclosed in the respective boxes. Lifting instruction to be shown in packing list.(14)Installation & Commissioning:14.1 The machine to be inspected as per accuracy chart before dispatch at supplier site. The suppliers to prove out the ""Test Components"" in all aspects. Acceptance and Qualification during Pre Dispatch Inspection (PDI), at the supplier end. Release of machine for dispatch after successful completion of acceptance test post PDI. ,14.2 The complete installation and commissioning must be carried out by the supplier for all the machines at the final destination/premises. A final accuracy test with an identified test component to be conducted by the purchaser/consignee. Final accuracy test report is to be signed jointly by Purchaser/consignee and supplier. Final acceptance would be given after conducting the accuracy test at the installation location.(15)Service:15.1 The manufacturer should have establised after sales and service network in India,15.2 The authorised service partner in India (Name & address), must be certified by the manufacturer and shown in the quotation,15.3 Number of silmilar machine installed in India in a reputed organisation. (Minimum 10 Nos.). (16)Training:16.1 To be provided for one machine at each of the final destinations,16.1 Operator training and programming training - 5 days.,16.2 Maintenance course mechanical, electrical and electronics - 5 days.(17)Cutting Tools:17.1 External Turning Tool Holders(MVJNL) – 8 nos. with 12nos. Inserts,17.2 External Turning Tool Holders(MWLNL) – 8 nos. with 20 nos.inserts,17.3 External Turning Tool Holders(PDJNR) – 8 nos. with 15 nos. Inserts,17.4 Threading Tool Holder – External –LH – 10 nos. with inserts(0.5 to 2mm,17.5 Threading Tool Holder – Internal –LH – 10 nos. with inserts(0.5 to 2mm),17.6 Grooving Tool Holder – External LH – 10 Nos. with 10 nos. inserts (3mm),17.7 Grooving Tool Holder – Internal LH – 10 Nos. with 10 nos. inserts (3mm),17.8 Parting Off Tool Holders – LH with 10 nos. inserts (2 mm width),17.9 Boring Tool Holder –for min bore Dia 12 mm – 14 nos. with 20 nos. inserts ,17.10 Boring Tool Holder – for min bore Dia 16 mm – 14 nos. with 20 nos. inserts."(,1) Simulator : CNC programimg simulation kit with advance system siemins 828D sl /Fannuc ,10.4 LCD with Turning configuration including standred MCP, Supply voltage 230 AC, Weight 15Kg Max.Ambient Temperature -20 To + 60 ,Operation (,1) Integrated multimedia skill development software with the following module:- Design,Engrave,Lathe Mastercam for SOLIDWORK of CNC machine (More then 4 axis machine ) Rast to Vect Router Pro Solid True shape Nesting Wire EDM Data Translator:ASCII,CADL,DWG,EPS,IGES,Inventor (IPT.IDW,IAM),Parasoild ,Solidwork (,1) Height Gauge : Standard Height gauge with vernier graduation and digital/anagole height gauge.Zise from 150 mm to 1000mm.Specification:-According to the size body,the smallest reading valueincludes 0.01mm,0.02mm to 0.05mm Place lever type dia gauge (dialindicator)onto attached dial indicator holder,parallelish.flatness,and stranghtness can be measured. ISO Certified and test report. need at supplyed of this item.(,1) Gauges : Standard (ISO Certified ) Steel Metric Gage Block ,Box set (,1) Manual Lifter : Hydraulic and manual Lifter -Use for MS Drum lift Trolley,Dram Trolley,all kinds of goods lift Lifting Capacity - 500 Kgs to 2 Ton,Lifting Height 1500mm or more,Adjustabel Fork Legs, Forkdiemension 60/140/1050 or mor,Distance Fork arm284 to 660 /250 to 550,Lower Height 90mm ,Nylon Wheel. (ISO Certify.)(,1) Surface Plate : Granite Surface PlateStandard Size (Optional) Uniformity in hardness, Accurate under load condition.vibration Absorbent .Easy to Clean. Rust-proof,Non-corrosive, thermal stability,wrap resistance low porosity Non-abrsive,Non- Magmetic (ISO Certified )(,1) Industry Helmet : PVC Yellow Industrial Safety Helmet, Weight 250 gram Size 12 Inches to 18 inches.(,1) Industry hand gloves : Industrial Leather Hand Gloves Standard Size (,1) Apron: Industrial Apron Standrad Cotton Blue Colour Causal size, Wash care- Machine wash. ( Causal long Half Shrat )(,1) Centre Punch : Chrome Steel Centre Punch For Industrial Name /Number :1985 125Mm(,1) Safety Glasses : Industrial Saftey Glass ( ISO Certified )(,1) Safety shoes with steel toe : Industrial Saftey Shoes with Steel Toe ( ISO Certified )(,1) Vernier Caliper 300MM : Standrad Make ISO Cerfied Technical specification 500-196-20/30 150mm/6'' Absolute Digital Digimatric Verner Caliper with Tested Certified(,1) Number Punch : Standrad Make ISO Cerfied Number Punch (Size 9.5 MM)(,1) Combination Plier : Standrad Make Multi Function Plier, Super Hardness Industrial Grade Chrome Vanadium Steel Vise,combination Plier with wire stripper crimper cutter winding function. ( ISO Certified )(,1) Hammer : Industrial use Sledge Hammer with Fiber glass Handal Weight -1200gram minimum. ( ISO Certified )(,1) Bore gauge 18 – 35 mm : Bore Gauge size 18-35 with Dial.Resolution:0.01mm.Bore Depth 141mm minimum. ( ISO Certified )(,1) FITTER:HYDRAULIC & PNEUMATIC TECHNICIAN(,1) Square Try 10 Cm .Blade : 10 inch, As Per Industry standarda (ISO Certified)(,1) Caliper Outside 15 .Cm Size: Dia 300 mm, As Per Industry standarda (ISO Certified)(,1) Caliper Inside 15 .Cm : Insize dian 30-320 mm Inside Spring Caliper ,As Per Industry standarda (ISO Certified)(,1) "Divider 15.Cm.: Divider 15.Cm diaType - Spring Divider Range - 0-150mmSize(L) - 150mm, (ISO Certified)"(,1) "Straight Scriber 15.Cm : ""Straight Scriber 15.Cm.Material: SteelThickness: 2 to 5 mmOverall Length: 215-216 mm"", (ISO Certified)"(,1) "Screw Driver 15.Cm.: All type 15 cm Screw Driver (Like- Phillips Screwdriver, Insulated Screwdrivers, Torque Screwdrivers,Flathead Screwdriver,Tri-Wing Screwdriver,Pozidriv Screwdriver,Hex Screwdriver.) As per industry standards ( ISO Certified )"(,1) "Hammer Ball Peen 0.22 Kg.With Handle. Type of Product : Ball Pein HammerGrade : IS 841-1983Weight : 500 gmsModel No : WH 500 BUNSPSC Code : 27112705 , ( ISO Certified )"(,1) "Hacksaw Frame Fixed 30 Cm: Hacksaw Frame Fixed 30 Cm with blade, Type of Product : Hacksaw Frame FixedBlade Size : 300 mmMaterial : Plastic Handle and sronge steel frameSize (Inch) : 6 InchPart No. : 941,, ( ISO Certified )"(,1) "Sefety Goggles: Frame Type : PVC with Woven Elastic StrapLens Material : PolycarbonateWeight (g) : 93 g, Industrial Saftey Goggles ( ISO Certified )"(,1) "Dot Slot Punch10 Cm: Point Diameter(Inch) : 10Overall Length (mm) : 1000Part No. : 1004Type of Product : Centre PunchesModel No : VCP-884, , ( ISO Certified )"(,1) Rule Steel 30Cm : Size : 30 cm/12", , ( ISO Certified )(,1) "Rule Steel 60Cm.: Size : 60 cm, ( ISO Certified )"(,1) Straight Edge 45 Cm.Steel.: Thickness: 2-5 mm. Hardness: 40-45 HRC, As per industry standards ( ISO Certified )(,1) Square Adjustable 15 Cm.Blade : 15 Cm.Blade , As per industry standards ( ISO Certified )(,1) Sprit Level 15 Cm. : 15 Cm , As per industry standards ( ISO Certified )(,1) Portable Hand Drill (Electric) 0 To 6Mm.: 10 mm chuc kMaximum Capacity In Wood Is 20 Mm. Professional Powerful Heavy Duty Electric. Maximum Capacity In Steel Is 10 Mm, As per industry standards(,1) "Taps And Dies Complete Set In Box B.A Set contains:9 pc dies set: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75, 1/8-279 pc taps: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75, 1/8-271 pc tap wrench1 pc die handle 1"" OD, As per industry standards ( ISO Certified )"(,1) "Feeler Gauge 10 Blade. Material: Steel,Item Dimension: 20 x 20 x 5.0 cm, ( ISO Certified )"(,1) File Set : File Set all type, Contents Hand, Flat, Half Round, Round, Square, Three Square Files, As per industry standards(,1) "Micrometer (Outside And Inside): Brand : InsizeType : Outside MicrometerMaterial : Stainless Steel With carbide measuring facesLeast Count : 0.001 mmBrand : Insize, Type : Outside MicrometerMaterial : Stainless Steel With carbide measuring facesLeast Count : 0.001 mm, As per industry standards ( ISO Certified )"(,1) Minimesh Coupling hoses with Pressure gauges of different ranges. : Recharge Measuring Hose 1.5m R134A Car Air Conditioning Refrigerant Pressure Gauge Recharge Charging Hose, As per industry standards ( ISO Certified )(,1) "Allen Keys-Sets. : Full Set, Material :High tensile steelSurface finish:Black oxide finishSizes Available:1.5, 2, 2.5, 3, 4, 5, 6, 8, 10As per industry standards ( ISO Certified )"(,1) "Standard Sets spanner/slide wrenches/screw drivers. Sales PackageSET OF 12 PCSCombination TypeOPEN & BOX ENDMaterial, As per industry standards ( ISO Certified )CARBON STEEL"(,1) "Gland nut Wrench- box type. : Fits hydraulic cylinders on vehicles with gland nuts from 2-Inch to 6-Inch / 51mm to 152mmReverses to work on 17/64-Inch or 21/64-Inch pinholesUse with 3/4-Inch square drive ratchet or breaker barPackage dimensions:20.828""L x 14.223999999999998""W x 2.286""H, As per industry standards ( ISO Certified )"(,1) "Flowmeters, Measuring Instruments,e.g.Screw guage,V.C.etc.: Operating Voltage: DC4.5 5V-24VOperating Current: 15 mA (DC 5V)External Threads: 1/2""High amplitude = 4.6VLow amplitude = 0.5V, As per industry standards ( ISO Certified )"(,1) "Hydraulic Tube/ Pipe Bender : Size (Inch) : 5/16 inch Thickness : 8-25 mm Type of Product :Tube Bender Size (mm) : 8 mm, As per industry standards ( ISO Certified )"(,1) "Pipe flaring /champering tool. : 1Pc 7 Dies Tubing Pipe Flaring ToolFlaring Tubes Multi Vise ToolRotating Angle 45 Tilt Angle 45Hole Size 1/2 , 7/16 , 5/16 , 1/4 , 3/16 , 3/8 , 5/8, As per industry standards ( ISO Certified )"(,1) "O-ring remover/fixer : Color BlackExtended Length 25.00 centimetersItem Weight 1.21 poundsPart Number DRS002Size SAEUNSPSC Code 31410000,, ( ISO Certified )"(,1) "O-ring making Kits : Brand Name LoctiteColor YellowContainer Size 50.0Ean 0079340001121Full Cure Time 6 secondsGlobal Trade Identification Number 00079340001121Lower Temperature Rating -50 degrees_fahrenh, ,, ( ISO Certified"(,1) Thread Chaser-gauge.: For industry uses , As per industry standards ( ISO Certified )(,1) Pipe Wrench-Different sizes: Pipe Wrench full set Pipe wrenches are usually sold in the following sizes (by length of handle): 10, 14, 18, 24, 36, and 48 inches, As per industry standards ( ISO Certified )(,1) "Pliers/Nose pliers for opening lock rings with holes: .Length (mm) : 127Length (inch) : 5Type of Product : Needle Nose Plier, As per industry standards ( ISO Certified )"(,1) TIG welding set for welding pipes. : TIG welding full set , Like- tig welding filler rod, gas cylinder with gas , regulator , pipe , and other extra mandatory tools or equipment regarding tig welding . ,As per industry standards ( ISO Certified )(,1) "Pneumatic air compressor : Fully Automatic Pneumatic air compressor with voltage stabilizer, Horse Power 10 HPMaximum Flow Rate 501 - 1000 cfmAir Quality Standard Class 0Lubrication Style OIL INJECTEDCooling Method Air CooledRental Available YesSpares Available YesIs It Portable YesInstallation/After Sales Service Available YesWarranty 1 YEARMotor 1 YEAR ( ISO Certified )"(,1) Temperature gun(Laser type) : GM320 Non Contact Laser LCD Display Digital Infrared (IR) Temperature Meter Gun -50°C to 330°C, for industry use , As per industry standards ( ISO Certified )(,1) Basic Hydraulic simulator : Use For Simulation (,1) "Basic electropeumatic simulator : Type of Product :Single Solenoid Valve Working Presssure :10 kgf/cm2 Temperature Range :5-50°C"(,1) "Hydraulic power pack, : type of Product : Hydraulic Bottle Jack Capacity :50 Ton Maximum Height :385 mm, As per industry standards ( ISO Certified )"(,1) "Accumulator set : Material HydraulicColor SilverPressure 315 PSIUsage Hydraulic SystemDesign BladderCapacities 1-4ltrGas Volume ltrOil Volume 40ltrMaximum Working Pressure 315, As per industry standards"(,1) "Dryer and FRL unit : Material SSStructure DiaphragmPressure Medium PressurePressure Setting Range 0 - 4 BarMax Working Temperature 60-90deg C, ( ISO Certified )"(,1) "Valve cut section (Hydraulic and pneumatic ) : Pressure High PressureMedia AirVoltage 240 VPower Source HydraulicFrequency 50 HzPhase Single Phase , As per industry standards ( ISO Certified )"
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
60000.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane