Supply Of Building Infrastruct, Hyderabad-T - Tender Details

• Opening Date : Refer Documents
• Closing Date : Sat 8th March, 2025

• ₹ 18456104.00
• NTID 39359040

Supply Of Building Infrastructure - Providing, Supplying And Placing Pillow Of Overall Dimensions Of 660mmx410mm Made Of Pu Foam 100% Polyester Fabric Keeps The Pillow Durable, Light Weight And Wrinkle Resistant, While Also Adding A Soft, Comfortable Feel. Supplying And Installing Shelves Storage Of Bedroom With Follwoing Specification With Proper Green Pro Certification And Overall Size : Dressing Table Depth - 450.0 Mm Width - 440.0 Mm Height - 1710.0 Mm Dressing Stool –depth - 335.0 Mm Width - 360.0 Mm Height - 450.0 Mm .material :panels Of Dressing Table & Stool Are Made Of 18 Mm Thick Prelaminated Particle Board .all The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Side Panels Are Made Of 18 Mm Thick Prelaminated Particle Board With Imported H.d.f. Foil Wrapped Decorative Trims Fixed On To It.mirror Panel Is Made Of 18 Mm Thick Particle Board With 4 Mm Thick Mirror Fixed On To It..supporting Pipe Used For Fixing The Mirror Frame Is Made Of M.s. 25 Mm Square Pipe Of Thickness 1.2 Mm. Stool Seat Is Made Of Foam With Fabric Wrapped On To It.hardware : The High Quality Hardware Used Like Roller Slides, Hinges , Minifix, Dowels Is Of Make Hettich..construction : Knock Down Construction.packets : 3 Packets. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. Metal Pipe Is Powder Coated In Shade Metallic Silver Grey To Thickness Of 50 Microns(+-10). Supplying And Installing Shelves Storage Of Bedroom With Follwoing Specification With Proper Green Pro Certification Andoverall Size Including Top Cornice : Width - 946.0 Mm Depth - 598.0 Mm Height - 1941.0 Mmmaterial :body Panels Are Made Of 18 Mm Thick Prelaminated Particle Board.all The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding.door Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Side Panel Are Made Of 18 Mm Thick Prelaminated Particle Board With All The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvcedge Banding And With Imported H.d.f. Foil Wrapped Decorative Trim Fixed On To It. Drawer Components Are Made Of 18 Mm Thick Prelaminated Particle Board .all The Exposed Edges Are Edge Banded With 0.8 Mm Thick Pvc Edge Banding. Body Back And Drawer Bottom Are Made Of 8 Mm Thickprelaminated Particle Board.top Cornice Is Made Of Imported H.d.f. Foil Wrapped Decorative Trim. Hardware : The High Quality Hardware Used Like Roller Slides, Hinges , Minifix,wooden Dowels Is Of Make Hettich.. Lock Used For Main Door Is 3 Way Lock And Lock Used For Drawer Is Cam Lock Construction : Knock Down Construction. Packets : 2 Packet. Finish :. 18 Mm Thick Prelaminated Particle Board Is In Walnut Shade. Supplying And Installing Tale For Study In Bedroom With Follwoing Specification Of Overall Size:width - 900.0 Mm Depth - 450.0 Mm Height - 750.0 Mm Material:top Panel Is Made Of 18 Mm Thick Prelaminated Particle Board All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Structure Consist Of Metal Frames Made Of M.s. 25 Mm Square Pipes In 0.9 Mm Thickness. Drawer Assembly Consists Of Drawer Front Made Of 0.6mm Crca Sheet, Drawer Tray Of 0.8mm Crca Sheet.hardware :the High Quality Hardware Used .construction:knock Down Construction.packets:3 Packets. Finish:18 Mm Thick Prelaminated Particle Board Is In 4501, Make — Godrej (shirval).side Frame Structure And Back Frame Structure Are Powder Coated In Shade : Matt Taupe White. Ref No. 9001904 To Thickness Of 50 Microns (+-10).rest All Metals Are Powder Coated In Shade : S/gcharbrown. Ref No. 9000605 To Thickness Of 50 Microns (+-10). Supply And Installation Of Revolving Chair Seat/back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Pure Leather And Moulded High Resilience (hr) Polyurethane Foam Of Density 45±2 Kg/m3,and Hardness Load 16 ± 2 Kgf For 25% Compression.the Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.r.w Round Tube Of Size 1.9±0.03cm X 0.16 ±0.0128cm. It Upholstered With Pure Leather. Supply And Installation Of 3 Seater Sofa Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg/cu.mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg/cu, Upholstered With Fabric Or Leatherette. Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg/cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/cu. Mtr, Upholstered With Fabric Or Leatherette. Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [moisture Resistance & Termite Proof As Per Is:303] & Pinewood Of Cross Sections Devoid Of Major Knots & Surface Defects. 6 Nos. Per Seat & 3.8mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. Leg Assembly : It Is A Welded Assembly Made In Stainless Steel (grade Ss 202) Tube & Plate With Plastic Endcap. Width (w): 146.0 Cm. Depth (d): 90.5 Cm. Height (h): 85.5 Cm. Seat Height (sh): 45.0 Cm. Supply And Installation Of 1 Seater Sofa Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg/cu.mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg/cu, Upholstered With Fabric Or Leatherette. Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg/cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/cu. Mtr, Upholstered With Fabric Or Leatherette. Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [moisture Resistance & Termite Proof As Per Is:303] & Pinewood Of Cross Sections Devoid Of Major Knots & Surface Defects. 6 Nos. Per Seat & 3.8mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. Leg Assembly : It Is A Welded Assembly Made In Stainless Steel (grade Ss 202) Tube & Plate With Plastic Endcap. Width (w): 86.0 Cm. Depth (d): 90.5 Cm. Height (h): 85.5 Cm. Seat Height (sh): 45.0 Cm. Supply And Installation Of Center Table Glass: It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. Pisa Center Table Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Supply And Installation Of 1. Seat Assembly: The Cushioned Seat Inner Is Made Of Injection Moulded Glass Filled Poly-amide.upholstered Seat Sub-assembly Consists Of Moulded High Resilience (hr) Polyurethane Foam Of Density 45±2 Kg/m³, And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. *seat Size: 45.5cm. (d) X 52.4cm. (w) Supply And Installation Of Visitor Chair Having Specifications Seat /backassembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Pure Leather And Moulded High Resilience (hr) Polyurethane Foam Of Density 45±2 Kg/m3,and Hardness Load 16 ± 2 Kgf For 25% Compression.the Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.r.w Round Tube Of Size 1.9±0.03cm X 0.16 ±0.0128cm. It Upholstered With Pure Leather. Seat Assembly:it Should Be Circular Type 0 30.0±0.5cm And Made Up Of 0.1±0.012cm Thk Cr Steel. It Should Be Welded To The Understructure And Black Powder Coated ( Dft 40-60 Microns ) . Understructure Assembly: The Understructure Should Be Made Of Ms Tube 0 2.2±0.03cm X 0.16±0.0128cm Thk Ms Erw Tube. It Should Be Welded To The Ms Fabricated Circular Seat Assembly And Black Powder Coated ( Dft 40-60 Microns ). The Understructure Should Be Provided With Black Pp Injection Moulded Ferrules. Overall Dimensions Of Stool Are: Width- 47.3 Cm, Depth- 47.3cm, Seat Height-46.5cm. Supply And Installation Of Center Table Glass: It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. Pisa Center Table Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Supply And Installation Of Main Desk Size Shall Be 1200 Width X 600 Depth X 743 Height . Top Shall Be Of 18 Mm Thickness Made Of Plt Board With 2 Mm Edge Banding. Wenge And Savannah Maple Plt Board Shall Be Used. The Understructure Shall Be In Pre-laminated Panels Made With Plt Boards . 2- Drawerand 3 - Drawer Storage Units With Different Combinations To Support Tops Made With 18 Mm Plt Boards Of Different Colours.modesty And Back Panels Made With 18 Mm Plt Boards. The Pedestals / Storages Shall Be Fitted With Necessary Locks. The Product Should Be Iaq Gold, Greenpro, Griha , Bifma Level Certified Supply And Installation Of Storage Of Follwing Specification Product Size - 2 Doors (lh And Rh) For 900w Storage-each Door Width 448w Construction & Material - Made From 0.6mm Thick Crca (d Grade, Is-513) Soft Closing Hinge Handle - Asthetically Appealing Handle Made Of Aluminum 4 Digit Combination Numeric Lock - 3 Way Locking Provision - Keyless Operation - Code Setting Without Tools - Code Finding From The Front By Recovery Key - Master Key System Available. Master Key System Available. - Up To 9999 Combination Of Password. Shelving - It Is A 12 Bend Panel Made Of 0.7mm Thick Crca (d Grade, Is-513) Each Shelf Has Max Load Capacity Of - 55kg Udl For 900w Unit 4 Nos. Of Fixed Shelves For 1950(h) A4 Size Box File (85wx340hx285d) Can Be Stored Vertically On All Loading Levels (refer Sheet 4 Of 17) Number Of Files That Can Be Stored In One Shelf Is As Follows:900 W = 10 No Of Files Finish - Epoxy Polyester Powder Coated To The Thickness Of 50 Microns (+/-10 Micron). The Product Should Be Green Guard Certified. Supply And Instllation Of Table With Cpu Hanger Size Shall Be 1650 Width X 9000 Depth X 728 Height Mm . Top Shall Be 18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat( Epoxy Polyster).leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube ,finish Powder Coat ( Epoxy Polyster).the Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat (epoxy Polyster) Plus The Drawer Front Shall Be 0.8 Mm Thick Crca Finish Powder Coat (epoxy Polyster) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat (epoxy Polyster) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat (epoxy Polyster) . The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supply And Installation Of Storwel Plain Shall Have An Overall Size Of 916mm(w)x486mm(d)x1981mm(h) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8mm, Door Thickness Of 0.8mm (high Yield Strength) And All Other Components Shall Have A Thickness Of 0.9mm. These Components Shall Be Made Of Crca ‘d’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available.the Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supply And Installation Of Back Unit 1650x500x750 Top Panel-made Of 25mm Thick Mdf One Side Pre-laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top.the Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Slide Door Unit-made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom,back And Shelves. Shutters Are Made Of 25mm Thick Mdf One Side Pre-laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening.storage Is Provided With Lock For Security Supply And Installation Of Product Size - 2 Doors (lh And Rh) For 900w For 900w Storage-each Door Width 448w Construction & Material - Made From The Combination Of Aluminium Alloy (63400) Extrusion And Clear Glass. Soft Closing Hinge. Handle - Asthetically Appealing Handle Made Of Aluminum 4 Digit Combination Numeric Lock - 3 Way Locking Provision - Keyless Operation - Code Setting Without Tools - Code Finding From The Front By Recovery Key - Master Key System Available. Master Key System Available. - Up To 9999 Combination Of Password. Shelving - It Is A 12 Bend Panel Made Of 0.7mm Thick Crca (d Grade, Is-513) Each Shelf Has Max Load Capacity Of - 55kg Udl For 900w Unit 4 Nos. Of Fixed Shelves For 1950(h) A4 Size Box File (85wx340hx285d) Can Be Stored Vertically On All Loading Levels (refer Sheet 4 Of 17) Number Of Files That Can Be Stored In One Shelf Is As Follows: 900 W = 10 No Of Files Supply And Instalation Of Overall Dimension 1650x1950x750 Primary Work Surface:made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.the Product Should Be Iaq Gold, Greenpro, Griha , Bifma Level Certified Secondary Work Surface:made Of 25mm Thick Mdf One Side Pre-laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top. Softclosing Access Flap With In-build Power Box Are Provided On Work Surface For Wire Management. Modesty Panel:made Of 25mm Thick Mdf One Side Laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top Under- Structure:made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal:made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25mm Thick Mdf One Side Pre-laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-box-file Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestal Is Provided With Lock For Security. The Product Should Be Iaq Gold, Greenpro, Griha , Bifma Level Certified Supply And Installation Of Overall Dimension 1650x500x750 Top Panel:made Of 25mm Thick Mdf One Side Pre-laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top Slide Door Unit:made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shad Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom,back And Shelves. Shutters Are Made Of 25mm Thick Mdf One Side Pre-laminate Board Confirming To Is-14587:1998 With 0.4mm Pvc Membrane Pressed On To Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Storage Is Provided With Lock For Security. The Product Should Be Iaq Gold, Greenpro, Griha , Bifma Level Certified Supplying And Installation Of Enterprise 1200 Table Without Cpu Hanger Size Shall Be 1200 Width Mm X 600 Depth Mm X 728 Height Mm. Top Shall Be 18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat( Epoxy Polyster) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube ,finish Powder Coat ( Epoxy Polyster).the Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat (epoxy Polyster) Plus The Drawer Front Shall Be 0.8 Mm Thick Crca Finish Powder Coat (epoxy Polyster) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat (epoxy Polyster) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat (epoxy Polyster) . The Product Should Be Iaq Gold, Greenpro, Griha , Bifma Level Certified Supply And Installation Of Seat/back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Pure Leather And Moulded High Resilience (hr) Polyurethane Foam Of Density 45±2 Kg/m3,and Hardness Load 16 ± 2 Kgf For 25% Compression.the Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.r.w Round Tube Of Size 1.9±0.03cm X 0.16 ±0.0128cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. (w) X 49.2 Cm. (d) Back Size : 47.5 Cm. (w) X 77 Cm. (d) Armrests: The Armrest Top Should Be Moulded From Polyurethane(pu), Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.s E.r.w Tube Having Chrome Plated Finish.the Armrest Height Adjustable Up To 6.5±0.5cm In 5 Steps. Active Bio-synchro Mechanism: The Adjustable Tilting Mechanism Should Be Designed With The Following Features: • 360° Revolving Type. • Front-pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up/dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5cm. Pitch-center Dia.(75.0 ± 1.0cm. With Castors.) Twin Wheel Castors:the Twin Wheel Castors Should Be Injection Moulded In Black Polypropylene. Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supply And Installation Of Seat Shell : The Seat Is Made From High Density Self-skin Polyurethane Foam Reinforced With 1.2 Mm M.s. Perforated Sheet Insert. The Polyurethane Foam Having Density Of Min. 350 Kg/m3 With A Shore 'a' Hardness Of 60±10. Seat Size : 52.0 Cm (w) X 50.5 Cm (d) Back Shell : The Back Is Made From High Density Self-skin Polyurethane Foam Reinforced With 1.2 Mm M.s. Perforated Sheet Insert.the Polyurethane Foam Having Density Of Min. 350 Kg/m3 With A Shore 'a' Hardness Of 60±10. Back Size : 52.0 Cm (w) X 53.5 Cm (h) Cross Beam : Cross Beam Made Up Of Diamond Shaped Double Wall Extrusion Of Aluminum 6063-t6 Alloy With Coated Of 50 Micron Epoxy Polyester Coating And Fitted With Polypropylene Copolymer Engineering Plastic End Caps. Cross Beam Size : 11.3 Cm (w) X 9.4 Cm (h) X 0.4 Cm (thickness). Leg : Legs Are Made Up Of High Pressure Aluminum Adc12 Die Cast Coated With 50 Micron Epoxy Polyester Coating, Leg Are Fitted With Soft Grip Pvc Level Adjusting Shoes. Armrest : Armrest Are Made Up Of High Pressure Aluminum Adc12 Die Cast Coated With 50 Micron Epoxy Polyester Coating. Seat Support Bracket Assembly : Seat Support Bracket Assembly Made Up Of Argon Shield Welding Of Hot Rolled Steel (is: 2062) 0.3cm Thickness. This Welded Structure Is Coated With 50 Micron Epoxy Polyester Coating. Clamping Bracket : Clamping Bracket Are Made Up Of Hot Rolled Steel (is: 2062) 0.3cm Thickness Coated With 50 Micron Epoxy Polyester Coating. Overall Dimensions Of Chair Seat Height - 42.5 Cm. Height - 87.0 Cm. Width-218.5cm And Depth-66.5 Cm, The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supply And Installation Of Luggage Storage Of Overall Size 610 Mm W X 455 Mm D X 1126 Mmh Body Panel Are Made Of 18mm Thick Pre Laminated Particle. All The Exposed Edges Are Edge Banded With 2 Mm Thick Pvc Edge Banding. Door /drawer Front Are 18mm Thick Made Of 18mm Pvc Membrame Pressed Mdf. Drawers Compaonents Are Made Of 18 Mm Thick Prelaminated. Board All The Exposed Edges Banded With 2 Mm Thick Pvc Edging, Drawer Bottom Are Made Of 9mm Thick Pl Particle Board. The High Quality Hardware Used In Satin Fininsh Handles Of Make Swatik , Ratex 15, Wooden Dowels Is Of Make Hetticj. Knock Down Construction. 3 Packet , Pvc Membrame Pressed Mdf Is In Wenge Realistic Pore Shade For Dark Chocklate Vermount V 455309 For Flutter And Squardo, 18mm Thick Pre Laminated Particle Borad Is In Colarin Shafe For Dark Choclate Supply And Installation Of 2 Seater Leantherette / Leather Sofa Eat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg/cu.mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg/cu, Upholstered With Fabric Or Leatherette. Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg/cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg/cu. Mtr, Upholstered With Fabric Or Leatherette. Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [moisture Resistance & Termite Proof As Per Is:303] & Pinewood Of Cross Sections Devoid Of Major Knots & Surface Defects. 6 Nos. Per Seat & 3.8mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. Leg Assembly : It Is A Welded Assembly Made In Stainless Steel (grade Ss 202) Tube & Plate With Plastic Endcap. Width (w): 146.0 Cm. Depth (d): 90.5 Cm. Height (h): 85.5 Cm. Seat Height (sh): 45.0 Cm. Supply And Installation Of Shoe Keeping Storage Of Specifications Of Delivery Condition- Knock Down Warranty- No Warranty [clearance Sale] Finish Color- Cola Rain Dimensions W X H X D (cm)- 68 X 179.4 X 38 Style- Contemporary & Modern Primary Material- Particle Board Wheels Included- No Capacity- Around 30 Pairs (depending On Shoe Sizes) Net Weight (kg)- 40 Supply And Installation Of Visitor Chair Having Specification Seat/back Assembly: The Seat And Back Are Made Up Of 1.2 ±0.1cm. Thick Hot-pressedplywood Measured Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Is Designed With Contouredlumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort Topopliteal Area. Mid Back Size 47.5 Cm. (w) X 58.0 Cm. (h). Seat Size 47.0 Cm. (w) X 48.0 Cm. (d) High Resilience (hr) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded Withdensity = 45±2 Kg/m3 And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. Armrests :the One-piece Armrests Are Injection Moulded From Black Co-polymer Polypropylene. Tubular Frame : The Powder Coated ( Dft 40-60 Microns ) Tubular Frame Iscantilever Type & Made Of Ø 2.54 ±0.03cm. X 0.2 ±0.016cm.thk. M.s. Er.w. Tube. Overall Dimensions Of Chair Width (w): 61.4 Cm. Depth (d): 64.5 Cm. Height (h): 89.5 Cm. Seat Height (sh): 46.5 Cm.'the Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supplying And Installing Revolving Mesh Back Chairs With Idm, Bifma 2, Griha And Indoor Air Quality Certiifcate For Bedroom With Follwoing Specification With Proper Green Pro Certification Andseat/back Assembly: The Seat Is Made Up Of 1.5 ±0.1cm. Thick Hot-pressedplywood And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.the Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.the Back Is Injection Moulded In Glass Filled Polypropylene Which Is Upholstered Withmesh Fabric.the Back Consist Of Adjustable Lumbar Support Made Of Injection Mouldedpolypropylene Having An Adjustment Of 5.0 ±0.1 Cm.the Chair Seat & Back Size Areseat Size 53.5 Cm. (w) X 51.0 Cm. (d)*mesh Back Size 51.0 Cm. (w) X 70.0 Cm. (h)high Resilience (hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/m³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression. Armrests :the Adjustable Armrest Is Designed With The Following Features :· Up-down Adjustment– 6 Steps (7.2 ± 0.5cm Range) · Armrest Top Is Mounted On Armrest Structure Made Of Glass Filled Nylon· Armrest Top Is Pu Moulded Over Glass Filled Nylon Insert. Center Tilt Synchro Mechanism With Multi Lock : The Mechanism Isdesigned With The Following Features: · 360° Revolving Type. · 3 Position Locking With Anti Shock Mechanism. · Tilt Tension Adjustment Pneumatic Height Adjustment: The Pneumatic Height Adjustment With Anadjustment Stroke Of 9.5 ± 0.3cm. Pedestal Assembly : The Pedestal Is Injection Moulded In Glass-filled Nylon Andfitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.1 ±0.5cm. Pitch-center Dia.(76.1 ±1.0cm With Castors). Twin Wheel Castors : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Width (w): 76.1 Cm. Depth (d): 76.1 Cm. Height (h): 101.5 - 111.0 Cm. Seat Height (sh): 44.5 - 54.0 Cm. The Product Should Be Iaq Gold, Greenpro, Griha , Bifma Level Certified Overall Dimensions Of Pigeon Hole Base 1800 H Main Modish Oak Shall Be 582mm(w)x400mm(d)x1200mm(h) . The Construction Shall Be Rigid Knock Down Construction . Material Used Shall Be All Side Panels , Top/bottom Panels And Shelf Panels Shall Be Made From 18 Mm Thick Pre- Laminated Board (interior Grade) With 2 Mm Thick Pvc Edge Beading . Back Panel Shall Be Made From 9 Mm Thick Pre- Laminated Board . Stackability Shall Have Add On Units Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel (max . 6 Add Ons) . The Shelfs Shall Be 6' Main Module Has 12 Shelves Placing In 207 Mm Distance , 4' Main Module Has 8 Shelves Placing In 270 Mm Distance . The Configuration Shall Have 6 ' Main Module , 4 ' Main Module Also 6' Add On Module , 4' Add On Module . The Producut Should Be Idm, Bifma 2, Griha And Indoor Air Quality Certiified. Supplying And Installing Revolving Mesh Back Chairs With Idm, Bifma 2, Griha And Indoor Air Quality Certiifcate For Bedroom With Follwoing Specification With Proper Green Pro Certification Andseat/back Assembly: The Seat Is Made Up Of 1.5 ±0.1cm. Thick Hot-pressedplywood And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam.the Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area.the Back Is Injection Moulded In Glass Filled Polypropylene Which Is Upholstered Withmesh Fabric.the Back Consist Of Adjustable Lumbar Support Made Of Injection Mouldedpolypropylene Having An Adjustment Of 5.0 ±0.1 Cm.the Chair Seat & Back Size Areseat Size 53.5 Cm. (w) X 51.0 Cm. (d)*mesh Back Size 51.0 Cm. (w) X 70.0 Cm. (h)high Resilience (hr) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45±2 Kg/m³ And Hardness 16±2 Kgf As Per Is:7888 For 25% Compression. Armrests :the Adjustable Armrest Is Designed With The Following Features :· Up-down Adjustment– 6 Steps (7.2 ± 0.5cm Range) · Armrest Top Is Mounted On Armrest Structure Made Of Glass Filled Nylon· Armrest Top Is Pu Moulded Over Glass Filled Nylon Insert. Center Tilt Synchro Mechanism With Multi Lock : The Mechanism Isdesigned With The Following Features: · 360° Revolving Type. · 3 Position Locking With Anti Shock Mechanism. · Tilt Tension Adjustment Pneumatic Height Adjustment: The Pneumatic Height Adjustment With Anadjustment Stroke Of 9.5 ± 0.3cm. Pedestal Assembly : The Pedestal Is Injection Moulded In Glass-filled Nylon Andfitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 66.1 ±0.5cm. Pitch-center Dia.(76.1 ±1.0cm With Castors). Twin Wheel Castors : The Twin Wheel Castors Are Injection Moulded In Black Nylon. Width (w): 76.1 Cm. Depth (d): 76.1 Cm. Height (h): 101.5 - 111.0 Cm. Seat Height (sh): 44.5 - 54.0 Cm. Supply And Installation Of Cpu Table Unlearn 3 Seater Cpu / Laptop Size Shall Be 2700 Width Mm X 600 Depth Mm X 680 Height Mm . Top Shall Be 25 Mm Thick , Base Material Shall Be 25 Mm Thick Pre-laminated Particle Board Plus 2 Mm Thick Pvc Edge Banding On Straight Outer Edges . The Modesty Shall Be 18 Mm Thick Its Base Material Shall Be 16 Mm Plain Particle Board Plus Post - Laminated With 0.6 Mm Top Laminate On Either Side 2 Mm Thick And 0.8 Mm Thick Pvc Edge Banding Of Matching Colour On Outer Edges Of Modesty . Legs Shall Be Made From 1.6 Mm Matt Silver Anodized Aluminiumn Extrusion . Legs Assembeled Together With 8 Mm Thick Ms Powder Coated Plate At Top . The Base Support Plate Is Having Provision For Wire Entry And Glide Fixing . The Wire Carrying Is Facilitated Through The Hollow Space Between Two Leg Extrusions And The Wires Are Concealed Between Removable Rigid Pvc Extrusion In The Leg . Max . 20 Nos. Of Dia 6 Wires Can Be Passed Through The Space Between Two Leg Extrusions . Table Support Brackets Shall Be Powder Coated Table Support Brackets Made From 2 Mm Thick Ms Sheet Provided For Overall Product Stability . Stopper Shall Be Powder Coated Made From 1.5 Mm Thick Aluminium Extrusion Fixed With Work - Surface By Powder Coated Stopper Bracket Made From 3 Mm Thick Ms Sheet . Both Ends Of Aluminium Extrusion Covered With Plastic Moulded End Cap . The Grommet Shall Be Made From Plastic Moulded Components To Facilitate Access Electrical / Data / Voice Sockets Access From Top . The Switch Mounting Tray Shall Be Powder Coated Made From 0.8 Mm And 2 Mm Thick Ms Sheet Fitted With Modesty Through Which Cables Can Be Passed . The Product Should Have Idm, Bifma 2, Griha And Indoor Air Qu Supply And Installation Of Table - T 101 Size Shall Be 1199 Width X 590 Depth X 750 Height . The Top Panels Shall Be Made From 18 +/- 0.5 Mm Thick Pre - Laminated Boards As Per With 2 Mm Thick Pvc Edge Banding On All Sides . Understructure Shall Be Made From 0.9 Mm +/- 0.09 Mm Thick Powder Coated 50 Microns (+/-10) Crca Ms. Tubular Frame Shall Be Sq. 25.4 +/- 0.3 Mm X 1.2 +/- 0.096 Mm Thick Ms Erw Tube .modesty Panel Shall Be Made From 1.0 +/- 0.09 Mm Thick Powder Coated 50 Microns (+/- 10). The Storage Shall Be Having Shell 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Tray 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Front 0.8 +/- 0.1 Mm Thick Crca Ms . Also There Should Be 10 Lever Cam Lock Plus Handles Built In Plastic. The Product Should Have Idm, Bifma 2, Griha And Indoor Air Quality Certified. Supply And Installation Of Work Station With Kbpt And Pedeatial Upbeat- Modular Desk Based System With 1200mm Ht. Dfine Plus Legs Are Fabricated By Argo Shield & Have A Rectangular Shape. Dfine Plus Legs Are Available For Work Top Level 750 Mm From Base.wire Tray With Integrated Power Box & Switch Plate (8+3 Anchor Roma). Soft Closing Access Flap With Brush. Metal Modesty: Metal Modesty Is Made From 0.8 Mm Thick Crca. Metal Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets Made Of 3 Mm Thick Hr Screen: 18mm Thk T Mold Fabric Screen On Studs Is Providing On Table Top. Worktop: 25mm Thk Prelaminated Partical Board With Pvc Lipping . Supply And Installation Of Vertical Filing Cabinets Whcih Use Less Floor Space. Size Of 4 Drawer Vfc Shall Be 1320mm(h) X 470mm(w) X 620mm(d). All The Components Shall Be Made Of Crca . It Should Have 1 Point Locking Mechanism And A Rigid Knock Down Construction. The Top, Side & Drawer Front Thickness Should Be 0.7mm. The Frames, Drawer-inside Cover And Side Back Side Thickness Should Be 0.6mm. The Back, Bottom And Drawer Thickness Should Be 0.5mm. Easy To Grip Full Length Recess Handle Shall Be Integrated Into Metal Drawer For Easy Pull Out Convenience. There Shall Be A Snap On Type Plastic Label Holder On Drawer Fronts. In Addition, 28 ‘ezee’ / ‘visa’ Files (foolscap) From Front To Back Of Thickness 20mm Per Drawer Can Be Hanged In Vfc. The Centralized Locking System Shall Be Provided Along With Shooting Bolt Mechanism And 10 Lever Cam Lock. The Vfc Should Have Anti-tipping Arrangement Which Ensures That When One Drawer Is Opened For Use, It Does Not Allow Other Drawers To Be Opened. The High Quality Precision Ball Slide Shall Be Provided With Drawer Load Capacity Of Max 40 Kg And Udl For 75,000 Cycles (bs). Plain Triangular Plate Pop Should Be Riveted At The Bottom Corners For Rigidity. Optional Accessories Like Drawer Partition And Cradle For Hanging A4 File Folders Front To Back Should Also Be Available. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10).he Product Should Have Idm, Bifma 2, Green Pro ,griha And Indoor Air Quality Certified. Supply And Installation Of Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.1cm. Thick Hot-pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (w) X 48.0 Cm. (d). Back Assembly: The Back Asembly. Should Be Made Of Powder Coated (oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03cm. X 0.2 ±0.016cm.thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm (w) X 60.5 Cm (h). High Resilience (hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/m3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-piece Armrests Should Be Injection Moulded From Black Co-polymer Polypropylene. Centre-tilt Mechanism: The Mechashould Be M Should Be Designed With The Following Features: • 360° Revolving Type. • 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. • Tilt Tension Adjustment. . Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3cm. Telescopic Bellow Assy: The Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Black 33% Glass-filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.3 ±0.5cm. Pitch-center Dia. (76.3 ±1.0cm With Castors.) Twin Wheel Castors: The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 43.3 To Max 54.3cm. Height - Min 89.5 To Max 100.5cm. Width & Dep H Of Chair As Measured From Pedestal - Width-76.3 Cm A D Depth-76.3 Cm.the Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Upply And Installtion Of Work Surface - Made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Along With A Gromett Is Provided On Work Surface For Wire Management Wire Management - Power Box Made With 0.8 Mm Thick Crca (is: 513), With Switch Plate (8+3 Module Cut Out Provision For Anchor Roma) Which Is Fixed With Worktop Along The Width At Access Flap Position. Modesty Panel & Side Skirting - Made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Understructure - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping Top Shelf - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Hinge Door + Drawer Unit - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. **drawer Bottom Is Made Of 5.5thk Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Is Provided With Cam Lock For Security. Essential Accessories - Wire Riser Made Of 0.8mm Crca (is-513) Is Provided For Proper Wire Management. Organizer Plate Made Of 1.2mm Crca (is-513) Is Provided For Magnetic Sticky Notes. Bag Hanger Hook Made Of 1.2mm Crca (is-513) Is Provided For Bag Hanging. Length - 2400mm Depth - 1770mm Height - 740mm. The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supply And Installation Of Table - T 101 Size Shall Be 1199 Width X 590 Depth X 750 Height . The Top Panels Shall Be Made From 18 +/- 0.5 Mm Thick Pre - Laminated Boards As Per With 2 Mm Thick Pvc Edge Banding On All Sides . Understructure Shall Be Made From 0.9 Mm +/- 0.09 Mm Thick Powder Coated 50 Microns (+/-10) Crca Ms. Tubular Frame Shall Be Sq. 25.4 +/- 0.3 Mm X 1.2 +/- 0.096 Mm Thick Ms Erw Tube .modesty Panel Shall Be Made From 1.0 +/- 0.09 Mm Thick Powder Coated 50 Microns (+/- 10). The Storage Shall Be Having Shell 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Tray 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Front 0.8 +/- 0.1 Mm Thick Crca Ms . Also There Should Be 10 Lever Cam Lock Plus Handles Built In Plastic. The Product Should Have Idm, Bifma 2, Griha And Indoor Air Quality Certified. Supply And Installation Of Work Station With Kbpt And Pedeatial Upbeat- Modular Desk Based System With 1200mm Ht. Dfine Plus Legs Are Fabricated By Argo Shield & Have A Rectangular Shape. Dfine Plus Legs Are Available For Work Top Level 750 Mm From Base.wire Tray With Integrated Power Box & Switch Plate (8+3 Anchor Roma). Soft Closing Access Flap With Brush. Metal Modesty: Metal Modesty Is Made From 0.8 Mm Thick Crca. Metal Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets Made Of 3 Mm Thick Hr Screen: 18mm Thk T Mold Fabric Screen On Studs Is Providing On Table Top. Worktop: 25mm Thk Prelaminated Partical Board With Pvc Lipping . Supply And Installation Of Vertical Filing Cabinets Whcih Use Less Floor Space. Size Of 4 Drawer Vfc Shall Be 1320mm(h) X 470mm(w) X 620mm(d). All The Components Shall Be Made Of Crca . It Should Have 1 Point Locking Mechanism And A Rigid Knock Down Construction. The Top, Side & Drawer Front Thickness Should Be 0.7mm. The Frames, Drawer-inside Cover And Side Back Side Thickness Should Be 0.6mm. The Back, Bottom And Drawer Thickness Should Be 0.5mm. Easy To Grip Full Length Recess Handle Shall Be Integrated Into Metal Drawer For Easy Pull Out Convenience. There Shall Be A Snap On Type Plastic Label Holder On Drawer Fronts. In Addition, 28 ‘ezee’ / ‘visa’ Files (foolscap) From Front To Back Of Thickness 20mm Per Drawer Can Be Hanged In Vfc. The Centralized Locking System Shall Be Provided Along With Shooting Bolt Mechanism And 10 Lever Cam Lock. The Vfc Should Have Anti-tipping Arrangement Which Ensures That When One Drawer Is Opened For Use, It Does Not Allow Other Drawers To Be Opened. The High Quality Precision Ball Slide Shall Be Provided With Drawer Load Capacity Of Max 40 Kg And Udl For 75,000 Cycles (bs). Plain Triangular Plate Pop Should Be Riveted At The Bottom Corners For Rigidity. Optional Accessories Like Drawer Partition And Cradle For Hanging A4 File Folders Front To Back Should Also Be Available. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10).he Product Should Have Idm, Bifma 2, Green Pro ,griha And Indoor Air Quality Certified. Supply And Installation Of Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.1cm. Thick Hot-pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (w) X 48.0 Cm. (d). Back Assembly: The Back Asembly. Should Be Made Of Powder Coated (oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03cm. X 0.2 ±0.016cm.thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm (w) X 60.5 Cm (h). High Resilience (hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/m3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-piece Armrests Should Be Injection Moulded From Black Co-polymer Polypropylene. Centre-tilt Mechanism: The Mechashould Be M Should Be Designed With The Following Features: • 360° Revolving Type. • 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. • Tilt Tension Adjustment. . Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3cm. Telescopic Bellow Assy: The Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Black 33% Glass-filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.3 ±0.5cm. Pitch-center Dia. (76.3 ±1.0cm With Castors.) Twin Wheel Castors: The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 43.3 To Max 54.3cm. Height - Min 89.5 To Max 100.5cm. Width & Dep H Of Chair As Measured From Pedestal - Width-76.3 Cm A D Depth-76.3 Cm.the Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Upply And Installtion Of Work Surface - Made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Along With A Gromett Is Provided On Work Surface For Wire Management Wire Management - Power Box Made With 0.8 Mm Thick Crca (is: 513), With Switch Plate (8+3 Module Cut Out Provision For Anchor Roma) Which Is Fixed With Worktop Along The Width At Access Flap Position. Modesty Panel & Side Skirting - Made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Understructure - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping Top Shelf - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Hinge Door + Drawer Unit - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. **drawer Bottom Is Made Of 5.5thk Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Is Provided With Cam Lock For Security. Essential Accessories - Wire Riser Made Of 0.8mm Crca (is-513) Is Provided For Proper Wire Management. Organizer Plate Made Of 1.2mm Crca (is-513) Is Provided For Magnetic Sticky Notes. Bag Hanger Hook Made Of 1.2mm Crca (is-513) Is Provided For Bag Hanging. Length - 2400mm Depth - 1770mm Height - 740mm. The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Supply And Installation Of Table - T 101 Size Shall Be 1199 Width X 590 Depth X 750 Height . The Top Panels Shall Be Made From 18 +/- 0.5 Mm Thick Pre - Laminated Boards As Per With 2 Mm Thick Pvc Edge Banding On All Sides . Understructure Shall Be Made From 0.9 Mm +/- 0.09 Mm Thick Powder Coated 50 Microns (+/-10) Crca Ms. Tubular Frame Shall Be Sq. 25.4 +/- 0.3 Mm X 1.2 +/- 0.096 Mm Thick Ms Erw Tube .modesty Panel Shall Be Made From 1.0 +/- 0.09 Mm Thick Powder Coated 50 Microns (+/- 10). The Storage Shall Be Having Shell 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Tray 0.5 +/- 0.07 Mm Thick Crca Ms Plus Drawer Front 0.8 +/- 0.1 Mm Thick Crca Ms . Also There Should Be 10 Lever Cam Lock Plus Handles Built In Plastic. The Product Should Have Idm, Bifma 2, Griha And Indoor Air Quality Certified. Supply And Installation Of Work Station With Kbpt And Pedeatial Upbeat- Modular Desk Based System With 1200mm Ht. Dfine Plus Legs Are Fabricated By Argo Shield & Have A Rectangular Shape. Dfine Plus Legs Are Available For Work Top Level 750 Mm From Base.wire Tray With Integrated Power Box & Switch Plate (8+3 Anchor Roma). Soft Closing Access Flap With Brush. Metal Modesty: Metal Modesty Is Made From 0.8 Mm Thick Crca. Metal Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets Made Of 3 Mm Thick Hr Screen: 18mm Thk T Mold Fabric Screen On Studs Is Providing On Table Top. Worktop: 25mm Thk Prelaminated Partical Board With Pvc Lipping . Supply And Installation Of Vertical Filing Cabinets Whcih Use Less Floor Space. Size Of 4 Drawer Vfc Shall Be 1320mm(h) X 470mm(w) X 620mm(d). All The Components Shall Be Made Of Crca . It Should Have 1 Point Locking Mechanism And A Rigid Knock Down Construction. The Top, Side & Drawer Front Thickness Should Be 0.7mm. The Frames, Drawer-inside Cover And Side Back Side Thickness Should Be 0.6mm. The Back, Bottom And Drawer Thickness Should Be 0.5mm. Easy To Grip Full Length Recess Handle Shall Be Integrated Into Metal Drawer For Easy Pull Out Convenience. There Shall Be A Snap On Type Plastic Label Holder On Drawer Fronts. In Addition, 28 ‘ezee’ / ‘visa’ Files (foolscap) From Front To Back Of Thickness 20mm Per Drawer Can Be Hanged In Vfc. The Centralized Locking System Shall Be Provided Along With Shooting Bolt Mechanism And 10 Lever Cam Lock. The Vfc Should Have Anti-tipping Arrangement Which Ensures That When One Drawer Is Opened For Use, It Does Not Allow Other Drawers To Be Opened. The High Quality Precision Ball Slide Shall Be Provided With Drawer Load Capacity Of Max 40 Kg And Udl For 75,000 Cycles (bs). Plain Triangular Plate Pop Should Be Riveted At The Bottom Corners For Rigidity. Optional Accessories Like Drawer Partition And Cradle For Hanging A4 File Folders Front To Back Should Also Be Available. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10).he Product Should Have Idm, Bifma 2, Green Pro ,griha And Indoor Air Quality Certified. Supply And Installation Of Seat Assembly: The Seat Assembly Should Be Made Up Of 1.2 ±0.1cm. Thick Hot-pressed Plywood , Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (w) X 48.0 Cm. (d). Back Assembly: The Back Asembly. Should Be Made Of Powder Coated (oft 40-60 Microns) Tubular Frame Of 0 2.54 ±0.03cm. X 0.2 ±0.016cm.thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Be Upholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm (w) X 60.5 Cm (h). High Resilience (hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density =45+/-2 Kg/m3 And Hardness Load 16 ± 2 Kgf For 25% Compression. Armrests: The One-piece Armrests Should Be Injection Moulded From Black Co-polymer Polypropylene. Centre-tilt Mechanism: The Mechashould Be M Should Be Designed With The Following Features: • 360° Revolving Type. • 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. • Tilt Tension Adjustment. . Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3cm. Telescopic Bellow Assy: The Bellow Should Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Black 33% Glass-filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.3 ±0.5cm. Pitch-center Dia. (76.3 ±1.0cm With Castors.) Twin Wheel Castors: The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Seat Height - Min 43.3 To Max 54.3cm. Height - Min 89.5 To Max 100.5cm. Width & Dep H Of Chair As Measured From Pedestal - Width-76.3 Cm A D Depth-76.3 Cm.the Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate. Upply And Installtion Of Work Surface - Made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Flap Along With A Gromett Is Provided On Work Surface For Wire Management Wire Management - Power Box Made With 0.8 Mm Thick Crca (is: 513), With Switch Plate (8+3 Module Cut Out Provision For Anchor Roma) Which Is Fixed With Worktop Along The Width At Access Flap Position. Modesty Panel & Side Skirting - Made Of 25mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Understructure - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping Top Shelf - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Hinge Door + Drawer Unit - Made Of 18mm Thick Pre-laminated Twin Board Of E1-p2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. **drawer Bottom Is Made Of 5.5thk Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Is Provided With Cam Lock For Security. Essential Accessories - Wire Riser Made Of 0.8mm Crca (is-513) Is Provided For Proper Wire Management. Organizer Plate Made Of 1.2mm Crca (is-513) Is Provided For Magnetic Sticky Notes. Bag Hanger Hook Made Of 1.2mm Crca (is-513) Is Provided For Bag Hanging. Length - 2400mm Depth - 1770mm Height - 740mm. The Product Should Be Indian Gesign Mark, Green Pro, Green Guard, Griha, Indoor Air Qulaity Anf Bifma Certiifcate.