Tender for GAIL(INDIA)LIMITED - NTID 25875950
GAIL(INDIA)LIMITED
Auraiya, Uttar Pradesh, India
NTID 25875950
- Opening Date : Tue 30th November, -0001
- Closing Date : Mon 29th November, 2021
- ₹ 88977200.00
- NTID 25875950
Supply of " 1. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (BLACK) , BE, WELDED SIZE: 6"", HEAVY" , "1. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 6"", HEAVY" , " 1. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 2"", HEAVY" , "1. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 1"", HEAVY" , "1. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 3/4"", HEAVY" , "1. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 1/2"", HEAVY" , "Carbon steel, as per ASTM A 105, dimension confirming to ANSI B 16.5 & SCRD, 150, FF/125AARH SIZE: 6"", 150#" , "Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5 & SCRD, 150, FF/125AARH SIZE: 6"", 150#" , "Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5 & SCRD, 150, FF/125AARH SIZE: 2"", 150#" , "Blind Flanges Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5, 150, FF/125AARH SIZE: 6"", 150#" , "Blind Flanges Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5, 150, FF/125AARH SIZE: 2"", 150#" , "90° Elbow, ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1""" , "90° Elbow, ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3/4""" , "90° Elbow, ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1 /2""" , "90° Elbow, IS-1239(PART-II) (GALV), IS-1239-II, SCRF, IS 1239(Part II) SIZE: 6""" , "90° Elbow, IS-1239(PART-II) (GALV), IS-1239-II, SCRF, IS 1239(Part II) SIZE: 2""" , "Equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1""" , "Equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3 / 4""" , "Equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1 / 2""" , "Equal Tee , IS-1239(PART-II) (GALV), IS-1239-II, SCRF, SIZE: 6""" , "Equal Tee , IS-1239(PART-II) (GALV), IS-1239-II, SCRF, SIZE: 2""" , "Un-equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 2"" x 1""" , "Un-equal Tee , IS-1239(PART-II) (GALV), IS-1239-II, SCRF SIZE: 6"" x 2""" , "CPLNG.HALF , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3 / 4""" , "CPLNG.HALF , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1 / 2""" , "CPLNG.RED , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1"" x 3 / 4""" , "CAP , ASTM A 105(GALV), , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3 / 4""" , "CAP , IS-1239(PART-II) (GALV), IS-1239-II, SCRF SIZE: 2""" , "VLV. GATE, SCRF, CL.2, 3000, BODY/BONNET – IS 318 Gr. 2, LEADED TIN BRONZE, TRIM – IS 320 ALLOY HT. 2 DIMN CONFIRMING TO IS 778 CL. 2 SIZE: 1""" , "VLV. GATE, SCRF, CL.2, 3000, BODY/BONNET – IS 318 Gr. 2, LEADED TIN BRONZE, TRIM – IS 320 ALLOY HT. 2 SIZE: 3 / 4"" " , "VLV. GATE, SCRF, CL.2, 3000, BODY/BONNET – IS 318 Gr. 2, LEADED TIN BRONZE, TRIM – IS 320 ALLOY HT. 2 SIZE: 1 / 2""" , "VLV. GATE,150#, PN 1.6/ANSI B16.1, FLGD/FF 125 AARH, BODY/BONNET – IS 210 Gr. FG. 200, TRIM IS 320 ALLOY SIZE: 6""" , "VLV. GATE, 150#, PN 1.6/ANSI B16.1, FLGD/FF 125 AARH, BODY/BONNET – IS 210 Gr. FG. 200, TRIM IS 320 ALLOY SIZE: 2""" , "VLV. NRV,150#, PN 1.6, FLGD/FF 125 AARH,BODY/BONNET – IS 210 Gr. FG. 200, TRIM IS 320 ALLOY HT2 & DIMN. CONFIRMING TO IS 5312 SIZE: 6""" , "STR., 150#, FLGD/FF/ 125 AARH , ASTM A234 GR. WPB, INTERNAL SS 304 / ‘T’ TYPE, GALV. SIZE: 6""" , "UPRIGHT SPRINKLER, K-FACTOR : US-8, & 79 DEG.C, MIN OPERATING PRESSURE - 2 (BAR) SIZE: 3 / 4""" , "12. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (BLACK) , BE, WELDED SIZE: 6"", HEAVY" , "12. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 6"", HEAVY" , " 12. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 2"", HEAVY" , "12. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 1"", HEAVY" , " 12. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 3/4"", HEAVY" , "12. CARBON STEEL PIPES INCLUDING CONNETTOR / COUPLING IS 1239 Part I (GALV) , SCRM, WELDED SIZE: 1/2"", HEAVY" , "Carbon steel, as per ASTM A 105, dimension confirming to ANSI B 16.5 & SCRD, 150, FF/125AARH SIZE: 6"", 150#" , "Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5 & SCRD, 150, FF/125AARH SIZE: 6"", 150#" , "Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5 & SCRD, 150, FF/125AARH SIZE: 2"", 150#" , "Blind Flanges Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5, 150, FF/125AARH SIZE: 6"", 150#" , "Blind Flanges Carbon steel, as per ASTM A 105(GALV), dimension confirming to ANSI B 16.5, 150, FF/125AARH SIZE: 2"", 150#" , "90° Elbow, ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1""" , "90° Elbow, ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3/4""" , "90° Elbow, ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1 /2""" , "90° Elbow, IS-1239(PART-II) (GALV), IS-1239-II, SCRF, IS 1239(Part II) SIZE: 6""" , "90° Elbow, IS-1239(PART-II) (GALV), IS-1239-II, SCRF, IS 1239(Part II) SIZE: 2""" , "Equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1""" , "Equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3 / 4""" , "Equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1 / 2""" , "Equal Tee , IS-1239(PART-II) (GALV), IS-1239-II, SCRF, SIZE: 6""" , "Equal Tee , IS-1239(PART-II) (GALV), IS-1239-II, SCRF, SIZE: 2""" , "Un-equal Tee , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 2"" x 1""" , "Un-equal Tee , IS-1239(PART-II) (GALV), IS-1239-II, SCRF SIZE: 6"" x 2""" , "CPLNG.HALF , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3 / 4""" , "CPLNG.HALF , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1 / 2""" , "CPLNG.RED , ASTM A 105(GALV) , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 1"" x 3 / 4""" , "CAP , ASTM A 105(GALV), , B-16.11, SCRF, 3000, IS 1239(Part II) SIZE: 3 / 4""" , "CAP , IS-1239(PART-II) (GALV), IS-1239-II, SCRF SIZE: 2""" , "VLV. GATE, SCRF, CL.2, 3000, BODY/BONNET – IS 318 Gr. 2, LEADED TIN BRONZE, TRIM – IS 320 ALLOY HT. 2 DIMN CONFIRMING TO IS 778 CL. 2 SIZE: 1""" , "VLV. GATE, SCRF, CL.2, 3000, BODY/BONNET – IS 318 Gr. 2, LEADED TIN BRONZE, TRIM – IS 320 ALLOY HT. 2 SIZE: 3 / 4"" " , "VLV. GATE, SCRF, CL.2, 3000, BODY/BONNET – IS 318 Gr. 2, LEADED TIN BRONZE, TRIM – IS 320 ALLOY HT. 2 SIZE: 1 / 2""" , "VLV. GATE,150#, PN 1.6/ANSI B16.1, FLGD/FF 125 AARH, BODY/BONNET – IS 210 Gr. FG. 200, TRIM IS 320 ALLOY SIZE: 6""" , "VLV. GATE, 150#, PN 1.6/ANSI B16.1, FLGD/FF 125 AARH, BODY/BONNET – IS 210 Gr. FG. 200, TRIM IS 320 ALLOY SIZE: 2""" , "VLV. NRV,150#, PN 1.6, FLGD/FF 125 AARH,BODY/BONNET – IS 210 Gr. FG. 200, TRIM IS 320 ALLOY HT2 & DIMN. CONFIRMING TO IS 5312 SIZE: 6""" , "STR., 150#, FLGD/FF/ 125 AARH , ASTM A234 GR. WPB, INTERNAL SS 304 / ‘T’ TYPE, GALV. SIZE: 6""" , "UPRIGHT SPRINKLER, K-FACTOR : US-8, & 79 DEG.C, MIN OPERATING PRESSURE - 2 (BAR) SIZE: 3 / 4""" , "Hook up with existing 16"" pipe to new 6"" pipe including reinforcement pad SIZE: 16"" x 6""" , PTD Warehouse - 1 , PTD Warehouse - 2 , PTD Warehouse - 3 , Providing temporary free standing movable barricades of height 2.0 m and made of angle sections 40x40x6mm or 50x50x3mm hollow MS tube posts/horizontal members/ bracings covered with 1.63mm thick MS sheet The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. 1.63 mm thickness for isolation of area, provided with suitable glow signs, warning signs etc. and painted with approved quality and color including dismantling /relocation / removal after , "Earthwork in excavation including surface clearing (removal of vegetation etc.) to a maximum depth of 3.0 m for foundation of walls, columns etc., in all kinds of soil except soft rock and hard rock. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, as per direction of Engineer-In-Charge." , "Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. including watering and consolidating by mechanical means to the required density as per the specification achieving 95% proctor density as per IS: 2720. Excess material shall be disposed, spread & levelled as per EIC direction." , Providing and filling of fine/ coarse sand of approved quality in compressor block foundations etc. The sand shall be properly rammed and watered as per IS:2720 in thickness not exceeding 150 mm all complete as per specifications and directions of Engineer-in-Charge. , Providing and laying stone / gravel soling under foundation and trench with stones of size 5-20 cm in layers not exceeding 75 mm including filling of voids with material like bajri, stone grits etc and compacting as per specifications and directions of Engineer-in-Charge. , "Providing and laying FPS bricks (of class designation 7.5) Masonry work in foundation in Cement Mortar 1:4 (1 Cement: 4 coarse sand) as per specifications in one or more brick thickness and in any shape including circular, curved including providing recesses, opening, scaffolding, staging, curing, finishing the joints flush below ground level. The rate to include plastering of 15 mm thickness in CM (1:4) on exposed surface, complete in all respects. Only net brick masonry volume as per drawing are measurable for payment." , Providing and laying Half Brick Masonry of FPS bricks (of class designation 7.5) in superstructure in Cement Mortar 1:4 (1 Cement: 4 coarse sand) as per specifications including, scaffolding, staging, curing, finishing the joints flush below ground level. The rate to include plastering of 15 mm thickness in CM (1:4) on exposed surface, complete in all respects. Only net brick masonry surface as per drawing are measurable for payment. , "Providing & Applying Cement plaster 1:4 (1 cement: 4 fine sand) on internal walls at all floors, at all heights with necessary preparation of base surfaces, hacking the Brick masonry or RCC Surface, The plaster surface shall be rubbed with iron plate till the surfaces become smooth, including, scaffoldings with platform, Tools and Tackles" , Providing and laying external sand faced cement plaster in two coats (12 mm + 8mm ) with external pebble dash in cement mortar (1:3) mix respectively with water proofing compound, with chicken mesh wherever required including all tools and tackles and scaffolding and curing etc. complete , Providing and applying two coats white washing (lime paint) of approved manufacture with mixing of "Fevicol" or equivalent approved adhesive @ 200gm per 10kg lime, on existing painted/unpainted surfaces including cleaning of existing surface using wire brush, removing all dirt and dust, preparing surface for applying painting evenly, with all materials, labour, tools & tackles & scaffolding if required etc… all complete as directed by Engineer-in-charge. , Providing and laying in position PCC 1:3:6 (1 Cement: 3 coarse sand: 86stone aggregate 40 mm nominal size) in foundations, substructure, under floor including tamping, ramming, vibrating, shuttering and curing etc. as specified and directed all complete. , "Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding the cost of reinforcement, all work for all heights & depths- 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). NOTES: The rates of the above items are inclusive of the cost of labor, material & curing etc. complete. The construction material like cement, sand, coarse and fine aggregate, steel, bricks, water etc. should confirm to the quality as per concerning IS codes. The contractors to arrange slump, cube test for cement concrete work as per standard at their cost. For bigger areas like forecourt etc-RMC M- 25 can be used. Specifications will be - Ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding the cost of reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge to be" , Supplying placing and fixing in position cold twisted deformed reinforcement bars conforming to IS 1786 for RCC works including transportation to site, straightening, bending cleaning and cutting. Cost to include binding wires all as per specification and directions of Engineer In Charge. , Supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters,teflon, lugs, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting etc. all complete. , Centering and shuttering including strutting, propping etc. And removal of same for in-situ reinforced concrete and plain concrete work, below plinth level for foundation, footings, tie beams/plinth beams, columns, copings cable trenches, canopy foundations, slabs floor slabs, etc. complete in and as directed by Engineer- in- Charge. , Supply & Fixing of toughened safety glass 5 to 12 mm thicK for Door & windows with material and labour complete inlcuding removal of broken glass and disposal of the same as per engineer in charge , "HDPE pipe (8"") in 2 cuts to provide of 1 higher size than fire water pipe dia (to be used at wall and pipe intersection)." , Removal and Refixing of Exiting Paver block:Removal & refixing of Paver block including laborer, watering ramming , compaction using soil compactor as per specification and instruction of EIC , Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. , "Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. i) 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity." , Demolition of Brick masonry (taking all necessary safety) for all heights above or below plinth level . including supply of all tools tackles, labour, cutters, necessary scaffolding, propping etc including removing the debris and disposal of unserviceable material to any lead and stacking of serviceable materials, handing over serviceable material if required as per technical specifications and direction of Engineer-in-Charge. , Demolishing existing RCC works (taking all necessary precautions) for all depths below and all height above plinth level including supply of all tools and tackles, labour, cutters, necessary scaffolding, propping etc. including disposal of unserviceable material to any lead, stacking of steel and other serviceable materials as per technical specifications and direction of Engineer-in-Charge. , Demolishing cement concrete (1:4:8) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. , "Dismantling doors, windows and clerestory windows (steel or wood) shutter including frame, architrave, holdfasts etc. complete and stacking within 50 metres lead." , "Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground." , "Dismantling Water bound macadam road/ Paver blocks manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the municipal dump yard as per direction of Engineer-in-charge." , Dismantling Bituminous Road manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the muncipal dumpyard as per direction of Engineer-in-charge. , Supply of M.S. plate of 12mm thick is conforming to IS 2062 including transportation, handling & storage. , Supply of M.S. plate of 10mm thick is conforming to IS 2062 including transportation, handling & storage. , Supply of M.S. plate of 6mm thick is conforming to IS 2062 including transportation, handling & storage. , Supply of M.S. Angle ISA 50x50x6 is conforming to IS 2062 Gr. E250Br/S275Gr including transportation, handling & storage. , Supply of M.S. Rod 16 dia. is conforming to IS 2062 including transportation, handling & storage. , Supply of M.S. Rod 10 dia. is conforming to IS 2062 including transportation, handling & storage. , Supply of M.S. Flat 50x6 is conforming to IS 2062 including transportation, handling & storage. , Supply of M.S. Flat 40x5 is conforming to IS 2062 including transportation, handling & storage. , Fabricating & erection / fixing in position structural steel upto15m height at all locations including supply of nuts, bolts, hilti bolts, washers, welding electrodes and all others consumables as required, including painting of steel structure & handling & transportation from owner’s store to site as per the drawings / directions of Engineer-in-charge. , "Supply, transportation, Installation, testing & commissioning of Pressure Guages (150mm Dia, Range 0- 16 Kg/cm2) with Isolation Cock including all required tube fittings and accessories etc. complete with in all respect. (Reference Datasheet attached)" , Supply, transportation, Installation, testing & commissioning of Orifice Plate (Multi stage, Range 0-16 Kg/cm2), including all required tube fittings and accessories etc. complete with in all respect. (Reference Datasheet attached) , Supply, transportation, Installation, testing & commissioning of Hydraulic operated alarm including all required tube fittings and accessories etc. complete with in all respect.
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
Refer Documents -
Document Cost
Refer Documents -
Estimated Cost
88977200.00
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane