“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Supply Installation Testing An, Katra - Tender Details
Explore tender information for Supply Installation Testing An in Katra, including eligibility, deadlines, and bid specifics.
SHRI MATA VAISHNO DEVI UNIVERSITY
Katra, Jammu and Kashmir, India
NTID 38909281
Opening Date : Tue 28th January, 2025- Closing Date : Mon 27th January, 2025
- ₹ 8000000.00
- NTID 38909281
Supply Installation Testing And Commissioning Of 02 Nos Of New Dg Sets And Allied Work To Be Installed At Different Location At Smvdu Kakryal Katra
Key Values: Document Cost: 1600.00 | EMD: 160000.00 | Estimated Cost: 8000000.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
160000.00 -
Document Cost
1600.00 -
Estimated Cost
8000000.00
BOQ Items Total Items : 75 | Total Qty : 3043.36
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | DG Set: | ||
| 2 | Supplying, installation, testing and commissioning of 4 stroke Diesel engine of suitable BHP at 1500 rpm suitable for 250 kVA CPCBIV+, output of the alternator at site condition, capable of taking 10% overloading for one hour in any 12 hrs of running without loosing its rpm complete with Dynamically balanced flywheel,preferably flexible coupling,Exhaust gas turbo charged with Cooling System , Automatic safety control in case of low lubrication oil pressure, Automatic safety control in case of high water temperature. Automatic overspeed trip protection. The engine shall have Lubrication oil pump.Lubrication oil filter.Lubrication oil cooler.Bye-pass filter,Fuel pump,Fuel Filter,Hoses for fuel tank.Air intake manifold.Air cleaner dry type. Governor EFC type.Selfstarter.Alternator for battery charging.Residential silencer. Flexible pipe for silencer. Batteries for excitation with Battery charger.Techometer with hour meter,Auto mains failure controller, Engine control panel as applicable & as per manufacturers standard . | 1.000 | Nos |
| 3 | Supplying, installation, testing and commissioning of synchronous alternator rated 250 kVA CPCBIV+ at 1500 rpm, 3 phase ,50Hz,6 CYLINDER,310 HP, AC supply with 0.8 pf (lagging) at site condition.The alternator shall have SPDP enclosure (IP-23), brushless contineous duty, self excited and self regulated suitable for the environmental conditions and with H class of insulation and daily fuel tank of minimum 600 litre.The alternator shall be fitted with thermistors (controlled by AMC controller) for winding and bearing temperature and space heaters, AVR , battery charger for self excitation etc. complete in all respects.The alternator shall be fitted with suitable arrangement to bring out bus duct/cables of required sizes as mentioned in the SLD, along with CT for restricted earth fault protection and droop compensation . | ||
| 4 | BASE FRAME:Sturdy, fabricated, welded construction, channel iron Base Frame for mounting the above Engine and Alternator. Required number of anti-vibrations mounting pads, charged battery, battery stand, battery charger and leads etc | ||
| 5 | SITC of standerd AMF Panel for 250 kva DG Set: Supply, Installation, Testing and commissioning of Outdoor KIOSK type double front , back openable, Floor Mounted Low Voltage AMF panel IP55 manufactured by CPRI type tested vendor having type test certificate as per IEC 61439 Part1 & 2 for Short Circuit, Ingress protection, HV Test, tempertaure rise, suitable for operation on 415V 3 Phase, 50Hz supply, load bearing members , outer covers of panel shall be fabricated out of 2.0mm thick CRCA sheet steel and partitions, internal covers made of 1.6mm sheet material . Panel shall have base frame of minimum 600mm height fabricated out of 50mmx50mmx6mm MS angle Panel, out of which minimum 300mm to be grounted in PCC of 1:3:6 ratio. Panel shall be duly powder coated with RAL7032 shade. EC Grade 6101A Alumium bus bar shall be used with following switchgears and metering. Necessary arrangement be made for termination of incoming and outgoing cables from back side. Contractor to get the G.A. drawings approved before execution. | 1.000 | Nos |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054