- Home
- >
- Tender
- >
- Jammu and Kashmir Tender
- >
- Department of Department of University and Higher Education
- >
NTID 32473158
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply And Installation Of 40 in Jammu - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply And Installation Of 40 " in Jammu, India.
Department of University and Higher Education
Jammu, Jammu and Kashmir, India
NTID 32473158
- Opening Date : Wed 12th July, 2023
- Closing Date : Mon 10th July, 2023
- ₹ 696000.00
- NTID 32473158
Key Values: Document Cost: 590.00 | EMD: 13920.00 | Estimated Cost: 696000.00
Tender Description
Supply And Installation Of 40 Kva Diesel Generator Set In The Boys Hostel At Reasi Campus Of Jammu University Reasi
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 4 | Total Qty : 153
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing, Installing, testing and commissioning of silent type Diesel generating set along with having prime power rating of 40 KVA 415 volts at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 Phase system and for 0.85 load factor and consisting of the followings:- a) Diesel Engine:-Diesel Engine 4 stroke water cooled electric start with 56BHP rating at 1500 RPM suitable for above output of alternator at 40 degree C, 50% RH at at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000 capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. b) Engine mounted instrument panel fitted with and having digital display for following: (i) Start-Stop Switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM Indication (vii) Over Speed indication (viii) Low lub oil trip indication (ix) Engine hours indication c) Alternator:-Synchronous alternator rated at 40 KVA 415 volts at 1500 RPM, 3 Phase 50 Hz. AC Supply with 0.8 lagging power factors at 40 degree C, 50% RH and at 1000 meter MSL. The alternator shall be having SPSD enclosure, brushless continuous duty, self-excited and self-regulated through AVR conforming to IS:4722/BS 2613 suitable for tropical conditions and with class-F/H insulation. d) Base Frame and Foundation:-Both the engine and alternator shall be mounted on suitable base frame made of MS Channel with necessary reinforcement which shall be installed on suitable existing cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. e) Fuel Tank:-Minimum Daily Service fuel tank of 120 litres capacity fabricated out of 3mm thick M.S Sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS Class C pipes of suitable dia complete with valves, level indications and accessories as required as per specifications. f) Exhaust System:-Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. g) Starting System:-12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable Nos. of batteries 25 plates, 120 AH capacity lead acid type as required as per specifications. h) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air in to the atmosphere as per specifications. Including construction of base platform for placing of Genset. The size of platform is (15 X9 X 1 -6 ) of M-10 Grade (1:3:6) 1Cement, 3Sand, 6(20mm) crushed course agg. including plastering the exposed surface in C:M 1:4(Including shifting of existing DG set (10 KVA) to some other suitable place as per the requirement in the University.) (Make Engines:- Escorts,Cummins, Catterpiller, Kirloskar Green, Mahindra, Ashok Leyland) (Make Alternators:- Stamford, Leyroy sommers, Kirloskar Green, Mahindra, Ashok Leyland,Maclate). | 1.00 | Set |
| 2 | Earthing with recon prefabricated gel chemical earthing electrode made o pipe B class in M.S pipe one side other hot dip galvanised with 100 mtr. Coating fitted with conductor and corrosion resistant crystalline moisture and back filled compound and electrode including digging of fit refilling complete job. | 2.00 | Set |
| 3 | Providing and fixing 4mm dia copper wire on surface or in recess for loop earthing as required. | 50.00 | Rmt |
| 4 | Supply& laying of following PVC insulated PVC sheathed Aluminum conductor 1100 volts graded armoured cable including end termination, cost of thimbles, nuts bolts, clamp glades etc connection testing and commissioning including digging the trench where required and refilling back complete job (Make Havells/ Polycab/ Plaza/Grandley/ Finlox/General). 3.5 core 95 Sq mm | 100.00 | Rmt |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054