Facebook
Description

Special Repair To Roads At Or Md Accn Lower Camp And Ub Area Sig Regt Under Age B/r-ii At Ge Dehradeun

Tendering Authority: Military Engineer Services

India, Uttarakhand, DEHRADUN

NTID

29110601

Last Date For Submission

11 Oct, 2022

Closing Date

11 Oct, 2022

BOQ Items
# Item Quantity Units
1 M&L for repair to pot holes any depth, not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25 mm thick in depth, making good by applying tack coat with paving bitumen @ 5kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified and directed. 10.00 10 Sqm
2 M&L for preparing of un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc. and sweeping with mechanical broomers and finally fanning the cleaned surface with air compressors to removed all loose dirt and applying evenly priming tack coat with bituminous primer @ 10Kg/10 sqm using viscosity grade Bitumen VG-10 complete all as specified and directed. 100.00 10 Sqm
3 M&L for providing 75 mm thick WBM in with coarse aggregate lime stone/sand stone of grading 2 spread rolled and consolidated to gradient and chamber with 8 to 10 Ton power rolled complete all as specified and directed. Note:-Combined thickness ie 150 mm thick shall be measured in single unit. 100.00 10 Sqm
4 M&L for preparing of black top surface by brushing with mechanical boomer for removing caked mud etc. and sweeping with mechanical boomer and finally with air compressor to remove all loose dirt etc and finally fanning the cleaned surfaces with gunny bags to removed all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using viscosity grade Bitumen VG-10 over black top surface complete all as specified and directed. 1295.00 10 Sqm
5 M&L for providing bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed. 1225.00 10 Sqm
6 M&L for providing bituminous premix semi dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed. 170.00 10 Sqm
7 M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed. 145.00 Sqm
8 Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. 87.00 Each
Tender InquiryInquiry