Shell Kit Item For Parcel Van , Chennai - Tender Details

• Opening Date : Refer Documents
• Closing Date : Fri 20th September, 2024

• ₹ 0.00
• NTID 37549573

Shell Kit Item For Parcel Van. A) Underframe Complete To Drg.no. Rvp11119 Alt.'f' Anx- 3 - 1 No. The Manufacturing Facility As Per Icf/md/spec-147 Issue Status-01 Rev.02 With Amendment No.01 B ) Roof Assembly To Drg. No. Vp16133 Alt 'c', Anx-1 - 1 No C) End Roof Assembly To Drg. No . 58116066 Alt 'f' - 2 Nos. D) Location Of Side Wall Assembly To Drg. No. Vp14001 Col.i - 1 No. Roof Flange And Carline In Sidewall To Be Made Of Single Piece Crf. Sidewalls Shall Be Assembled With Door Cut Out To Drg Nos. Vp10150 And Vp10 151. End Sidewalls To Drg Nos. 88814009 Alt'nil' And 88814010 Alt'nil' To Be Supplied As Loose. Insulating Pins To Drg No Mi001576 Alt B Shall Be Assembled With Roof And Sidewalls As Per Drg No Vp10146 Alt D, Anx.2. The Fir M Shall Fulfill The Requirement As Per Icf/md/spec-200,issue Status-01,rev-04 With Amendment No.01. E) End Wall Complete To Drg.no. Vp15190 Alt "d" -2 Nos. With Following Items Shall Be Welded. 1 Tail Lamp Bracket To Drg. No. Aaa 26 077 Alt C On Each End Wall As Per Location To Drg. No. 59315001 Alt 'n' F) Supply And Installation Of B Ody Shell Items And Partition Frame I) Supporting Members On Trough Floor Vp10133 Alt A Col-i - 1 No. Ii) Fixing Arrgt. Of Collapsible Door Vp10147 Col-i -1 No. Iii) Location Of Back Pieces For Sliding Door Vp10149 Col-i Anx-1 -1 No. Iv) Bracket Complete For Mounting Dummy 58110017 Col-i Alt B -2 Nos V) Body Shell Items As Per Vp1014 6 Alt D Anx-2 Item-13-4 Nos, Item-14 -4 Nos, Item-15-2 Nos, Item-16-4 Nos, Item-19-4 Nos. Vi) 53810092 Alt 'nil' - 2 Nos Vii) Vp10164 Alt 'nil' - 2 Nos Viii) 88810006 Alt 'nil' - 1 No G) Rain Water Gutter 2.11012.0.20.110.100 -4 No S. H) Bracket For Destination Board 58126002-4nos,58126003-4nos. I) Roof Ventilator To Drg.no. Wlrrm(018)-7 -3-401 Alt P Col.i - 5 Nos. J) Supply And Installation Of Sliding Door To Drg. No. Vp58001 Alt 'a'-1 No. And Vp1 0002 Alt. B- 1 No. Special Condition: A. The Under Frame Should Be Supplied As Normal Side Up And Side Be Arer Side Down. Packing Condition As Per Drg. No. Icf/j&t/misc-2487, Alt 'a'. Finished Components, Except Ss Components Shall Be Thoroughly Cleaned And Applied With Epoxy Zinc Phosphate Primer As Per Rdso Spec. N O. M&c/pcn/100/2018 To A Dft Of Minimum 60 Microns And Mdts-094, Rev.01 With Amendment-01 Shall Be Followed For Procedure And Colour Shade Excluding The Areas As Specified In Detail Drawings.before Applying Pr Imer, The Top Of The Sole Bar(40mm) To Be Masked Along With The Shell Joining Areas Of End Wall And Side Wall. B, C,d & E. - Packing As Per Icf/j&t/misc-2201, Alt 'e' Packing As Per Icf/j&t/sk-1809, Alt 'a' Roof Frame Work , Side Wall And End Wall Material Shall Be Of Rdso Spec-ck 201 With Amd No.01 Corrigendum No.01 Grade X2 Cr Ni12 Only. The Roof Assembly, Side Wall Assembly And End Wall Assembly Shall Be Applied With (airless S Pray) Eco Friendly Water Based Modified Epoxy Zinc Phosphate Etch Primer To Icf/md/spec-231, Issue Status 01, Rev. 00. Before Applying Primer The Faces Of The Angle Marked @ Thus To Be Masked Along With The Shell Joini Ng Areas Of End Wall. F & J. Installation Required As Per Assembly Drg. After Shell Assembly & Annexure 'a' To Be Followed. Supply Rates And Installation Rates To Be Quoted Separately. To Be Supplied As A Kit Before The Start Of Manufacturing, The Firm Shall Contact The Design Office For Clarifica Tions/updation. [safety Item] [ Warranty Period: 30 Months After The Date Of Delivery ]