Tender for Public Works Department - NTID 29964746
Public Works Department
Bilgram, Uttar Pradesh, India
NTID 29964746
- Opening Date : Sat 3rd December, 2022
- Closing Date : Sat 3rd December, 2022
- ₹ 2600000.00
- NTID 29964746
Road Safety Work At Bilrayan Panwari Road To Sursa Beekapur Bannapur Road Odr-0041 Ch 0-000 To 5-000
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
260000.00 -
Document Cost
944.00 -
Estimated Cost
2600000.00
BOQ Items Total Items : 7 | Total Qty : 4634.2
# | Item | Quantity | Units |
---|---|---|---|
1 | Road Marking by Thermoplastic Paint P/L of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35.The finished surface to be level uniform & free from streaks and hole. Including all taxes and labour cess but excluding GST | 1423.00 | Sqm. |
2 | Fixing & Eraction of built up Cantilever Structure Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. Including all taxes and labour cess but excluding GST | 2.00 | Nos. |
3 | Reflective Signs with High Intensity prismatic sheeting type IV Providing & fixing of reflective signs with a corrosion resistant 4 mm thick aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3. Including all taxes and labour cess but excluding GST | 43.20 | Sqm. |
4 | Km. & Hectometer stone P/Fixing and painting of Km. & Hectometer stone etc(comp). Including all taxes and labour cess but excluding GST | 5.00 | Nos. |
5 | Direction and Place Identification signs upto 0.9 sqm size board Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing). Including all taxes and labour cess but excluding GST | 36.00 | Nos. |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane