Tender for JAMMU AND KASHMIR STATE POWER DEVELOPMENT CORPORATION LIMITED - NTID 29943357
JAMMU AND KASHMIR STATE POWER DEVELOPMENT CORPORATION LIMITED
Ganderbal, Jammu and Kashmir, India
NTID 29943357
- Opening Date : Tue 20th December, 2022
- Closing Date : Mon 19th December, 2022
- ₹ 149000.00
- NTID 29943357
Repairing Of Silt Gate At Headworks Preng Of Power House Ganderbal
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 1 | Total Qty : 1
# | Item | Quantity | Units |
---|---|---|---|
1 | Providing and fitting of new galvanized steel core steel wire rope 40mm dia in place of damaged steel wire of the gate. The job includes providing and fitting of stainless steel U clamps/shackles. Dismantling of silt gate from the groove with the help of portable tripod set on the walls of the gate to be installed for lifting the gate and placing it on the ground. The gate slot and platform is to be cleaned. All embedded parts shall be checked for defects/damaged and rectified whenever noticed. Scaled formed over the embedded parts are to be removed. If pitting is observed on the surface, it shall be repaired and grounded. The rusted parts, if observed shall be thoroughly cleaned and repainted as per approved painting schedule. The sill beam and guides shall be cleared for all grit, sand etc. Dismantling of the top channels, lifting mechanism by way of cutting/opening the old damaged bolts and nuts etc. The job includes dismantling of gear box, coupling etc. Providing and fitting of new rubber seal, J type on the sides and flat bottom seal with vulcanized ends (Size of gate 4 6 ). The job includes providing and fitting of MS strips over the rubber seal for strengthening and fixing of all nuts and bolts and tightening them uniformly to keep proper alignment of gate. All welds shall be checked for cracks/ damages and defects. Any welding that might have become defective is to be chipped out and remade following the relevant codal procedure. All nuts and bolts, rivet screws shall be tightened and replaced if found damaged. The gate leaf is to be thoroughly cleaned and repainted. Complete cleaning of guide channels if found damaged at any point so that the gate slides in the groove smoothly. Lifting and reinstallation of gate with the help of hydraulic crane and testing thereof. Dismantling the gearing mechanism and its complete overhauling including any repairs of damaged teeth of gears, greasing including replacement of damaged nuts, bolts, check nuts or cotter pins, lubrication of hoisting mechanism etc. Back fitting of gearing mechanism and testing thereof. | 1 | jobs |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane