Facebook
Description

Repair/resurfacing In Certain Road At East Side Of Lehl Marg At Binnaguri Mil Stn Under Ge South Binnaguri

Tendering Authority: Military Engineer Services

India, West Bengal, Binnaguri

NTID

29363542

Last Date For Submission

05 Nov, 2022

Closing Date

05 Nov, 2022

BOQ Items Total Items : 5 | Total Qty : 4634
# Item Quantity Units
1 M&L for surface dressing n exc 15cm deep for adjoining area, complete all as specified and directed by Engineer-in-charge 1700.00 SQM
2 M&L for Preparing of existing black top surface of road and newly laid macadam surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or by air compressor to remove all loose dirt etc and applying evenly a priming /tack coat with catonic bitumun RS-1 @ 2.50 Kg/10 Sqm over black top surface, complete all as specified and directed by Engineer-in-charge 1060.00 TEN SQM
3 M&L for premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using paving bitumen Vg-30 @ 4% (minimum) by the weight of total mix of any pernetration compacted to required gradient and camber with 8 to 10 tone power roller, complete all as specified and directed by Engineer-in-charge NOTE : (i) No extra allowances shall be admissible to the contractor if the bitumen content is required more than 4% by the weight of total mix as per approved design. The contractor shall quote the rate accordingly. 50.00 CUM
4 M&L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder content of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and pre-mixed material laid with mechanical paver, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified in the relevant clauses of SSR Part-I (2009) and , complete all as specified and directed by Engineer-in-charge Note : (a) Rate deemed to be included for making good of any undulation/damages in wearing surfaces, where semi sense asphaltic concrete to be laid. (b) Semi dense ashphaltic bituminous concrete shall be designed as specified and binder content shall be provided as per design mix, contractor shall quoted his rates considering the bitumen contents as 5.5%. Any variation in binder content on minus side shall be adjusted at the rate of Rs 50.00 per kilogram of binder but vartiation in binder plus side shall not be paid extra contrator shall quote accordingly. 960.00 TEN SQM
5 M&L for 2.5mm thick painting to road surfaces as in lines, dashes, arrows, letters , zebra crossing etc on roads, pavements and like with thermoplastic road marking paint @ 5 kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfaces while the painted surfaces are hot by mechanical means including cleaning surfaces, complete all as specified and directed by Engineer-in-charge (Note. The painting shall be carried out through mechanical appliances by the company's approved applicatior). Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. 864.00 SQM
Tender InquiryInquiry