Repair replacement refurbishme, Delhi - Tender Details

Repair/replacement/refurbishment Ofchildren Play Equipments At Various Parks/green Belts Under The Jurisdiction Of Sub-division-iii And Iv/hcd-6, Rohini (as And When Required - Providing And Fixing Of Rubber Seat Belt With S.s. Hook Including Labour, Welding Etc. All Complete As Per Direction Of Engineer-in-charge., Providing And Fixing Of Swing Chain With S.s. Hook Including Labour, Welding Etc. All Complete As Per Direction Of Engineer-in-charge., Providing And Fixing Of Toddler Swing Bucket With S.s. Hook Including Labour, Welding Etc. All Complete As Per Direction Of Engineer-in-charge., Providing And Fixing Of Roto See Saw Seat With Necessary Arrangements Including Labour, Welding Etc. All Complete As Per Direction Of Engineer-in-charge., Providing & Installing The Double Arch Swing Of Make Arihant /kompan/ Land Scape Structures/ Play/leo/kaalia Of Size 3.10x1.50mtr. Main Frame:- Main Cross Bar Made Of Round 75mm O.d. Pipe And Legs Made Of 50mm N.b. Pipe Legs- Arch Shaped Bended (must Be Min In Gi "b" Class Pipe). T Pipe Will Be Required For The Cross Bar. All The Pipes Should Be Isi Marked ( As Per The Is 1239/2004) & Of Reputed Brand. Ensuring The Strength, Durability, Stability & Long Life To The Kids. Structure With Safety As Paramount. Seats- Belt Type Seats Made Of Synthetic Rubberized Material/fiber Reinforced Fabric Materials Of Virgin Reinforced Material & Also Duly With Uv Resistant Colors, Chain Made Of Approx 6mm Thick G,i Chain With Rubberized Coating Of With 3 Mm Minimum Thickness, Chorme Plated Supporting Hook For Belts Hooks For Convenience & Height Adjustment/ Seat Movement, Self Lubricated Council Type Bush Baring Clamps Provided With Rubber Coated Chain To Be Hang The Complete Belt Assembly. The Complete Structure Double Arc Swing Should Be Powder Coated With Minimum Powder Coating Thickness Of 60-80 Microns. Accessories: Nut Bolts To Be Used All Approved Gi Nut Bolts Galvanised Iron With High Tensile Strength. Kid Capacity 2-4 Nos., Providing & Installing The Sea Saw Double Of Make Arihant /kompan/land Scape Structures /ok Play/leo/ Kaalia Of Size 2.0x2.50mtr.main Frame: Made Of See Saw Made Of 50mm Nb Pipe With Planks Made Of 40mm Nb Pipe And Supports Made Of 20mm N.b. Pipe, All The G.i Pipes Should Be "b" Class & Isi Marked (as Per The Is 1239/2004)& Of Reputed Brand Make & Ensuring The Strength, Durability, Stability & Long Life To The Kids Structure With Safety As Paramount. Seats - Seat Made Of Frp (fibre Reinforced Plastic), Duly Uv Resistant Colors, All Chemicals In The Frp Material Should Be Best Quality, The Fibre Mat Of 450gsm To Be Used For Strength & Stability With Supporting Frame. Frp Seat Size(approx.) 10"(l) X 8" (w) With Back Rest. The Complete Structure See Saw Double Should Be Powder Coated With Minimum Powder Coating Thickness Of 60-80 Microns Accessories: Nut Bolts- All Approved Gi Nut Bolts Galvanised Iron With High Tensile Strength Kid Capacity -4 Nos., Providing & Installing The Single Wave Climber Of Make Arihant/kompan/land Scape Structures/ok Play/leo/kaalia Of Size 1.75x0.80mtr. Main Frame: Main Frame Of Single Wave Climber Pipe Made Of Round 32mm Nb Pipe (must Be Min In Gi "b" Class Pipe) And Rungs Made Of 20mm N.b. Pipe - U Shaped Bended( Will Thickness Approx. Min 1.5mm - 2.2.mm Only), All The Pipes Should Be Isi Marked (as Per The Is 1239/2004 & Of Reputed Brand & Ensuring The Strength, Durability, Stability & Long Life To The Kids Structure With Safety As Paramount. The Complete Structure Single Wave Climber Should Be Powder Coated With Minimum Powder Coating Thickness Of 60-80 Microns Accessories: Nut Bolts- All Approved Gi Nut Bolts Galvanised Iron With High Tensile Strength Kid Capacity - 2 To 4 Nos. All Complete As Per The Direction Of Engineer-in Charge., Providing & Installing The Deluxe Slide (ss) Of Make Arihant/kompan/land Scape Structures/ok Play/leo/kaalia. The Center Support Of The Slide Is Made Up Of 50 Nb Gi Pipe. The Slide Is Made From Stainless Steel (ss) The Triangular Steps Of 16 Swg Are Provided And The Ladder Frame Is Made In 20 Nb And 25 Nb Powder Coated Gi Pipe. The Landing Support Is Made Up Of 25 Nb Gi Pipes. The Ladder Is Designed In Such A Way There Wont Entrap Childs Foot While Playing. The Pure Polyster Powder Coating Done On The Pipes Extends The Life Of Equipment. All Complete As Per The Direction Of Engineer-in-charge Including Earth Work, Cc Work Upto Plinth Level, Cc Block 1:1 :3 (1 Cement: 1 Coarse Sand (zone-iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Of Required Size., Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. A)in Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works., Steel Work In Built Up Tubular (round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.a) Hot Finished Welded Type Tubes., Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : A) 1:1 :3 (1 Cement: 1 Coarse Sand (zone-iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources)., Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :a) Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture., Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:a) One Or More Coats On Old Work., Supplying And Filling In Plinth With Sand Under Floors Including Watering, Ramming, Consolidating And Dressing Complete., Excavating Holes More Than 0.10 Cum & Upto 0.5 Cum Including Getting Out The Excavated Soil, Then Returning The Soil As Required In Layers Not Exceeding 20cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering Etc, Disposing Of Surplus Excavated Soil, As Directed Within A Lead Of 50 M And Lift Upto 1.5 M.a) All Kinds Of Soil, Deduct On Account Of The Disposal Of Dismantled Old Tmt Bars/g.i. Pipe Sections/mild Steel Sections (including Ms Hollow Tubular Sections) Received In The Form Of Scrap All Complete As Per The Direction Of The Engineer-in-charge. Nothing Extra Shall Be Paid On Account Of Cutting/dismantling, Any Loading/unloading, Transportation & Weighing Of The Scrap Steel Etc., Total I/c C.f. @0.973 On Dsr Items (i.e On Item No.9 To 15.) 3,76,333= 3,66,172, Add C.i. @3% On Dsr Items(i.e On Item No.9 To 15.) 3,66,172, Add M/r Items (i.e. Item No.1 To 8 & 16)= 14,64,955