Tender for Military Engineer Services - NTID 31288349
Military Engineer Services
Khadki, Maharashtra, India
NTID 31288349
- Opening Date : Mon 17th April, 2023
- Closing Date : Thu 13th April, 2023
- ₹ 4800000.00
- NTID 31288349
Repair/maintenance To Water Supply Installations Including Repairs To Pumps, Starter Panels, Improvement To Earthings Of Installations And Other Misc Work Under Age E/m Ii Under Ge (central) Kirkee
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
96000.00 -
Document Cost
500.00 -
Estimated Cost
4800000.00
BOQ Items Total Items : 101 | Total Qty : 2726
# | Item | Quantity | Units |
---|---|---|---|
1 | M&L for fabrication, supply, fixing and commissioning of box type display boards of size not less than 1.5 M x 1M x 0.2 M made out of ACP sheet of 3 MM thickness with english alphabets and numerics cut out and designed out of 3 mm thick acrylic sheet neatly pasted on the ACP board with flushed LED strips running along the sides of the acrylic letters to be fixed on wall with necessary fixing arrangements as per the site requirement on roof, wall etc. including taking down old board any type complete all as specified and as directed by Engr-in-Charge at site NOTE - (a). Before fabrication of the display board, the contactor has to produce a paper printout detailing all dimensions and matter to be displayed so as to get it inspected and passed by Engr-in-Charge. (b). Matter to be displayed, colour of the ACP sheet and colour of LED strip will be as directed by Engr-in-Charge. (c). The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the display board at the installation incl providing electrical connections complete. | 8.00 | Each job |
2 | M&L for supplying and fixing information board /shock treatment chart etc. of Size 2.0m X 1.0m in power houses /pump houses and other E/M installations as per the requirment at various locations made out of pre laminated board with digital printing,pasting side beadings of decorative aluminium channel with proper fixing arrengement etc.including old board any type as directed by Engr-in-charge. NOTE - (a). Before fabrication of the board, the contactor has to produce a paper printout detailing all dimensions and matter to be displayed so as to get it inspected and passed by Engr-in-Charge. (b). Matter to be displayed, colour of the ACP sheet and colour of Retro Reflective sheet will be as specificed and directed by Engr-in-Charge. (c). The quoted rate is deemed to be inclusive of cost of labour and materials required for fixing of the informatory board at the loaction. | 8.00 | Each job |
3 | M&L for earthing complete with pure copper bar 25mm outer dia electrode, including testing 3 mtr long and having suitable hole on top to connect earthing strip with nut bolts and washers burried directly and verticaly in ground with top edge at 30 cm below ground level after making bore hole of 200 mm dia and 3.3 mtr deep using suitable machanical drilling machine connected with copper trip 25x3mm with copper nut bolts and connected to test point from earthing pit. The earthing should be filled with crbon based erthing compound. The resistance of the compoind should be less than 0.1 Ihm. The compound should be highly conductive, hygroscopic, non mgnetic, non corrosive in natur and have best moisture retaining qualities with ph value between 7-9. including reinforced plastic pit not less than 300x300 mm with pit cover, including necessary earth work complete all as specified and as directed. Note; (a) Contractor should visit site before quoting the rates. (b) Rates including demolition of old earthing. (c) Contrctor should provide all necessary safety measures during exectution the job and responsible for any loss to the Govt property during execution the job. | 20.00 | Each job |
4 | M&L for replacement of air termination, single pointed aluminium rod 12 mm dia and 300 mm long all as specified and as directed | 20.00 | Each |
5 | M&L for replacement test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw all as specified and directed by Engr-in-Charge. | 20.00 | Each |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane