Tender for INDIAN ARMY - NTID 38069650

• Opening Date : Refer Documents
• Closing Date : Tue 26th November, 2024

• ₹ 0.00
• NTID 38069650

Repair And Overhauling Service - Short Refit Of In Asset Com 0995 Sdp Sr O L 25 A; Any Other Suitable Brand; No; Buyer Premises, Service Provider Premises-dock Bed Preparation Including Marking, Block Placement, Rigging Up Of Centrelines And Preparation Of Wooden Keel/shape Blocks As Per Docking Plan. (a) The Firm Is To Provide Manpower For Rope Handling For Docking/ Undocking Of Slave Dock Pontoon As Per Docking Schedule. (b) Normally, One Docking Is Envisaged. Secord Docking Is Catered To Address Exigencies, If Any Arises Or To Cater For Operational Requirements (c) Cost Of Additional Docking/ Undocking Operations Of The Pontoon, Emerging Due To Delay In Refit Attributable To The Contractor, Is To Be Borne By The Contractor. (d) Fire Sentry With Portable Fire-fighting Appliances As Well As Physical Security Of Contractor Items/ Material During Dry-docking/ Refit Period Are To Be Catered By The Contractor. Item No 1 2.00 Nos 1.0002 002 Cleaning Of Underwater Hull Post Docking, External Hull Surface Of The Pontoon To Be Cleaned By High Pressure Fresh Water Jet Washing (3000 Psi) Immediately After Docking. Item No 2 1950.00 Sq.m 1.0003 003 Provision Of Scaffolding, Positioning And Staging For Undertaking Survey, Renewal/ Repairs, Surface Preparation And Painting Of Sdp. Nb: (a) The Principles Dimensions Of The Pontoon Are As Follows:- Size Of Slave Dock Pontoon 86m(l) X 16m(b) X 2.8m(h) (b) Scaffolding Material Will Be Provided By Nd(v) Item No 3 1500.00 Cum 1.0004 004 (a) Undertake Visual Survey Of All Structural Members Including Complete External Hull Surface, Weather Deck, Access Ladders And All Internal Tanks, Manhole Covers And Deck Fittings. Item No 4 15000.00 Sq.m 1.0005 004 (b) Usg Survey Is To Be Undertaken For The Suspected Areas As Per Recommendations Of Class Society (to Be Paid On Actual). Item No 5 5000.00 Sq.m 1.0006 004 (c) Hull Survey And Action Taken Reports Is To Be Approved By Any One Of The In Approved Classification Society (abs/bv/dnv/irs/classnk/lr/rina). Nb:- (a) Surveys Are To Be Undertaken Through Qualified Inspection Services Provided Firm, Recognised By Any One Of The In Approved Classification Society, As Indicated Above. (b) Renewal Of Corroded/ Damaged Areas To Be Recommended Through Survey I.a.w Class Standards Or No 01/15. Ndt, Post Repairs, To Be Undertaken As Per Class Society Norms. (c) Tanks Repaired By Build-up/renewals Are To Be Air Pressure Tested. (d) Usg Gauge And All Associated Equipment For Survey To Be Provided By Firm. Robotic Survey Methods May Be Used By The Contractor To Save Labour And Time. (e) All Deck Fittings To Be Surveyed, Repaired And Load Tested Where Considered Necessary As Per Class Standards. (f) All Manholes To Be Inspected And Repaired To Ensure Water Tightness Item No 6 1.00 Set 1.0007 005 Metal Built Ups To Be Carried At Indicated Location I.a.w Class Standards Or No 01/15 Requirements. Nb: (a) Build Up Followed By Fairing By Grinding To Be Undertaken. (b) To Be Undertaken As Per Survey Report (to Be Paid As Per Actual Work Done) I.a.w Class Standards Or No 01/15. Item No 7 100.00 Sq.m 1.0008 006 Scantlings/ Hull Structural Renewal Of Corroded/ Damaged Areas As Per Survey. Nb: (a) Renewal To Be Undertaken As Per Class Standards Or No 01/15. (b) To Be Undertaken As Per Survey Report (to Be Paid As Per Actual Work Done) (c) Ndt/ Dpt Is To Be Undertaken For Renewal Areas. (d) Material Is To Be Catered By The Vendor Item No 8 10.00 Tonnes 1.0009 007 Air Pressure Testing (apt) To Be Undertaken For All Tanks/ Chambers As Per Class Standards To Prove Wt Integrity Post Repairs As Indicated At Note- 4(b) Above (to Be Paid On Actuals). Nb: (a) All Equipment/ Set Up (including Temporary Fixures And Their Removal After Test) Are Required To Be Catered By Contractor. (b) Pressure Test:- (i) A Test Pressure Of 150 Mm Water Gauge Is To Be Applied And Pressure Source Isolated. The Pressure Drop If Any, Should Then Be Monitored. (ii) Any Drop In Water Gauge Reading Should Not Exceed 13 Mm In 10 Minutes. (iii) Where The Drop Exceeds 13 Mm In 10 Mins, A Search Pressure Of 0.14 Kg/cm.sq (1370 Mm Water Head) Is To Be Applied To Search For Leaks. (iv) The Normal Test Pressure Of 150 Mm Water Gauge Is Then Repeated, Until Pressure Drop Is Controlled To Values As Above. Item No 9 23.00 Nos 1.001 008 Maintenance Painting For Llps Paint Scheme For External Underwater Area. Following Paint Scheme To Be Restored In Accordance To No 53/16:- Full Paint Renewal:- (to Be Undertaken As Per Survey, To Be Paid On Actual) (a) 01 Coat Primer (dft 50 Micron) (b) 02 Coats A/c (dft 150 Micron Each) (c) 01 Tie Coat (dft 125 Micron) (d) 03 A/f Coat (dft 150 Micron Each) Item No 10 100.00 Sq.m 1.0011 008 Maintenance Painting Of A/f Coating:- (to Be Undertaken As Per Survey, To Be Paid On Actual) (e) 01 Tie Coat (dft 125 Micron) (f) 03 A/f Coat (dft 150 Micron Each) Item No 11 500.00 Sq.m 1.0012 008 Restoration Of A/f Coat (g) Fresh Water Cleaning Of The U/w Hull Post Major Repairs And Prior To Painting. (h) 01 A/f Coat (dft 150 Micron) Item No 12 1950.00 Sq.m 1.0013 008 (i) Boot Top Area A/f Painting And Marking Nb: (a) Paint Will Be Provided By Contractor (as Per Existing Paint Scheme Of M/s Ppg Asian Paints) (b) Equipment, Covers And All Other Associated Items Are In The Quoted Rate. (c) Surface Preparation As Per Standards Mentioned In No 53/16 Or Similar Standards Indicated By Paint Oem To Be Achieved. (d) All Equipment (hand/power Tools) For Undertaking The Said Job To Be Provided By The Firm In Quoted Price. Item No 13 300.00 Sq.m 1.0014 009 Maintenance Painting For Hpps Paint Scheme For Ship Side Above Water Area. Following Paint Scheme To Be Restored In Accordance To No 53/16:- Full Paint Renewal (to Be Undertaken As Per Survey, To Be Paid On Actual):- (a) 01 Coat Primer (dft 50 Micron) (b) 02 Coat Ac (dft 125 Micron Each) (c) 01 Pu Top Coat : Grey-ral 7040 (dft 60 Micron) Item No 14 200.00 Sq.m 1.0015 009 Top Coat Maintenance:- (d) 01 Pu Top Coat : Grey-ral 7040 (dft 60 Micron) Nb: (a) Paint Will Be Provided By Contractor (as Per Existing Paint Scheme Of M/s Ppg Asian Paints) (b) Equipment, Covers And All Other Associated Items Are In The Quoted Rate. (c) Surface Preparation As Per Standards Mentioned In No 53/16 Or Similar Standards Indicated By Paint Oem To Be Achieved. (d) All Equipment (hand/power Tools) For Undertaking The Said Job To Be Provided By The Firm In Quoted Price. Item No 15 1430.00 Sq.m 1.0016 10 Maintenance Painting For Hpps Paint Scheme For Weather Deck. Following Paint Scheme To Be Restored In Accordance To No 53/16:- Full Paint Renewal (to Be Undertaken As Per Survey, To Be Paid On Actual):- (a) 01 Coat Primer (dft 50 Micron) (b) 02 Coat Ac (dft 150 Micron Each) (c) 02 Non Slip Coat (dft 250 Micron Each) Item No 16 400.00 Sq.m 1.0017 010 Top Coat Maintenance:- (d) 01 Non Slip Top Coat : (dft 150 Micron) Nb: (a) Paint Will Be Provided By Contractor (as Per Existing Paint Scheme Of M/s Ppg Asian Paints). Non Skid Top Coat Paint To Be Procured From Nmrl Tot Partner. (b) Equipment, Covers And All Other Associated Items Are In The Quoted Rate (c) Surface Preparation As Per Standards Mentioned In No 53/16 Or Similar Standards Indicated By Paint Oem To Be Achieved. (d) All Equipment (hand/power Tools) For Undertaking The Said Job To Be Provided By The Firm In Quoted Price. Item No 17 1430.00 Sq.m 1.0018 11 Maintenance Painting For All Ballast Tanks. Following Paint Scheme To Be Restored In Accordance To No 53/16:- Cleaning Of Tanks (a) Thorough Cleaning Of Tanks To Make Them Free For Salt, Dirt, Oil, Grease, Garbage Etc. Work To Be Primarily Undertaken Afloat Prior Docking Of The Pontoon. Suitable Manual/ Husbandry Tools To Be Used To Improve Quality And Speed Of Execution Of Work. Item No 18 11855.00 Sq.m 1.0019 11 Full Paint Renewal (to Be Undertaken As Per Survey, To Be Paid On Actual):- (b) 01 Coat Primer (dft 50 Micron) (c) 02 Coat Ac (dft 150 Micron Each) Item No 19 3000.00 Sq.m 1.002 11 Top Coat Maintenance:- (d) 01 Coat A/c: (dft 100 Micron) Nb:- (a) Paint Will Be Provided By Contractor (as Per Existing Paint Scheme Of M/s Ppg Asian Paints). (b) Equipment, Covers And All Other Associated Items Are In The Quoted Rate. (c) Surface Preparation As Per Standards Mentioned In No 53/16 Or Similar Standards Indicated By Paint Oem To Be Achieved. (d) All Equipment (hand/power Tools), Materials, Chemicals/ Consumables For Undertaking The Said Job (including Cleaning Of Tanks) To Be Provided By The Firm In Quoted Price. Item No 20 11855.00 Sq.m 1.0021 12 Maintenance Paining Of Hull Fittings. Repair/renewal Followed By Surface Preparation By Buffing/chipping And Painting Of The Following Iaw No 53/16 In Existing Colour Scheme:- (a) Towing Eyes Item No 21 4.00 Nos 1.0022 12 Maintenance Paining Of Hull Fittings. Repair/renewal Followed By Surface Preparation By Buffing/chipping And Painting Of The Following Iaw No 53/16 In Existing Colour Scheme:- (b) Cleats:- 04 Item No 22 4.00 Nos 1.0023 12 Maintenance Paining Of Hull Fittings. Repair/renewal Followed By Surface Preparation By Buffing/chipping And Painting Of The Following Iaw No 53/16 In Existing Colour Scheme:- (c) Bollards:- 24 Item No 23 24.00 Nos 1.0024 12 Maintenance Paining Of Hull Fittings. Repair/renewal Followed By Surface Preparation By Buffing/chipping And Painting Of The Following Iaw No 53/16 In Existing Colour Scheme:- (d) Guard Rails (complete Length Along The Pontoon Sides) Item No 24 1.00 Set 1.0025 13 Renewal Of Sacrificial Anodes Including Supply, Transportation, Fixing And Welding I.a.w Ncd 3908 (type- Mk 1). Nb:- (a) Anodes To Be Provided By Firm In The Quoted Price. (b) Sow Including Survey And Removal Of Old Anodes, Hull And Anode Surface Preparation And Necessary Painting Prior/ Post Fitment. Item No 25 20.00 Nos 1.0026 14 (a) Fabrication And Fitment Of Stainless Steel Drain Plug Sets. (each Set Consists Of 1 Male Plug & 1 Female Plug). (material: Male Plug Austenitic Stainless Steel Grade Aisi 201 Female Plug Carbon Steel Grade En8 As Per Bs 910) Item No 26 23.00 Set 1.0027 14 (b) Manufacture Of New Drain Plug Opening Keys Nb: Sow Includes The Following:- (a) Degutting Of Old Set Of Drain Plugs. (b) Supply And Installation Of Lead Washers On Drain Plugs. (c) Stage Inspection Would Be Carried Out For Marking, Cutting,fitup And Final Welding (d) Mobilization Of Welding Machines And Supply Of Weld Consumables Will Be Firm S Liability. (e) Dpt And Hose Test To Be Carried Out Post Completion Of Hot Work. (f) Tanks To Be Finally Proven Through Apt Item No 27 4.00 Set 1.0028 015 Undertake Di/dr And Renewal Of Water Level Floating Alarm Sensors. (technical Specification: Solid State/ Integral Logic, Oem: Procon Instrumentation Pvt Ltd:- Chennai) Item No 28 5.00 No S 1.0029 016 Repair/renewal Of Damaged Guard Rail. Nb: (a) Material To Be Provided By Firm (b) All Equipment (welding Plants And Accessories) For Undertaking The Said Job Including Consumables Like Ms Weld Electrodes And Gas For Cutting Is To Be Provided By The Firm In Quoted Price. (c) All Works Are To Be Carried Out As Per Standards Mentioned In Nes 155, Nes 706 Or Equivalent. Item No 29 50.00 Rmt 1.003 017 Supply And Renewal Of Ms Top Covers :- Nb: (a) Job Entails Supply And Fixing Of Rubber Gasket For Watertight Hatches (b) The Firm Is To Undertake Chalk Test Of All Watertight Hatches Post Completion Of Repairs In The Quoted Price. Item No 30 20.00 No S 1.0031 018 Renewal And Fitment Of Vertical Nitrile Rubber Fenders (specification : Inner Dia:125mm, Outer Dia:230mm, Length:2m) Item No 31 10.00 No S 1.0032 019 04 In No S Of Drain Plug Opening Keys For Existing To Be Manufactured As Per Given Sample ( Material High Tensile Steel) Item No 32 4.00 No S 1.0033 020 Maintenance Of Movable Dock Block Mechanism. Sow Include The Following:- (a) Removal Of Movable Dock Block Mechanism. (b) Undertake Repairs/ Renewal Of Movable Dock Blocks And Fittings As Per Survey Report. (c) Restoration Of Movable Dock Block Mechanism. (d) Trial Of Movable Dock Block Mechanism. Nb: (a) All Equipment (welding Plant/ Hand Tools And All Associated Accessories) For Undertaking The Said Job Including Consumables Like Ms Weld Electrodes And Gas For Cutting Is To Be Provided By The Firm In Quoted Price. (b) All Works Are To Be Carried Out As Per Standards Mentioned In No 01/15, Nes 155, Nes 706, No 53/16, No* 01/ 11 Or Equivalent. (c) Jetty Crane Support Will Be Provided By Nd(v). (d) Sow Will Be Supervised And Accepted By Nd(v). No Class Certification Required. Item No 33 3.00 No S 1.0034 021 Maintenance Of Ekm Dock Blocks Fitted On Sdp. Sow Include The Following:- (a) Removal And Repositioning Of All Ekm Dock Blocks Of Sdp To Facilitate Weather Deck Survey/ Painting. Item No 34 19.00 Nos 1.0035 021 (b) Surface Preparation Of All Ekm Keel/ Shape Blocks By Hydroblasting To Wj-2.0 Std/ Equivalent/ Or By Mechanical Chipping/ Buffing To St-3 Std Followed By Painting. Following Paint Scheme To Be Restored In Accordance To No 53/16 (ps 51) :- (i) 01 Coat Primer (dft 50 Micron) (ii) 02 Coats A/c (dft 150 Micron Each) Item No 35 500.00 Sq.m 1.0036 021 (c) Wood Packing On Blocks/ Sheet Covering, As Required, Are To Be Removed And Restored. Nb:- (a) Paint Will Be Provided By Contractor From Any In Approved Vendor. (b) Equipment, Covers And All Other Associated Items Are In The Quoted Rate. (c) Dock Blocks Are To Be Removed From The Pontoon And Fitted Back Post Completion Of Job. (d) Jetty Crane Support Will Be Provided By Nd(v). Item No 36 19.00 Nos 1.0037 022 Repair/ Renewal Of Damaged Guard Rails, Posts And Supports. Nb: (a) Material To Be Provided By Firm (b) All Equipment (welding Plants And Accessories) For Undertaking The Said Job Including Consumables Like Ms Weld Electrodes And Gas For Cutting Is To Be Provided By The Firm In Quoted Price. (c) All Works Are To Be Carried Out As Per Standards Mentioned In Nes 155, Nes 706 Or Equivalent. Item No 37 50.00 Rmt 1.0038 023 Supply And Renewal Of Ms Hatches Nb: (a) Job Entails Supply And Fixing Of Neoprene Rubber Gasket For Watertight Hatches. (b) The Firm Is To Undertake Chalk Test Of All Watertight Hatches Post Completion Of Repairs In The Quoted Price. (c) Hatches Should Be Satisfactory During Apt, Where They Are Fitted In The Cluster Boundary. Item No 38 20.00 No S 1.0039 024 Renewal And Fitment Of Horizontal Nitrile Rubber Fenders (specification: Inner Dia:125mm, Outer Dia:230mm, Length:2m) Item No 39 10.00 No S 1.004 025 Visual Inspection And In-situ Repairs Of Sounding Pipes And Vent Pipes For Internal Tanks. Following Works To Be Undertaken:- (a) Visual Inspection Item No 40 46.00 No S 1.0041 025 Visual Inspection And In-situ Repairs Of Sounding Pipes And Vent Pipes For Internal Tanks. Following Works To Be Undertaken:- (b) Undertake Repairs/ Renewal Of Damaged Sections As Per Survey Item No 41 20.00 No S 1.0042 025 Visual Inspection And In-situ Repairs Of Sounding Pipes And Vent Pipes For Internal Tanks. Following Works To Be Undertaken:- (c) Overhauling/renewal Of Ball Valves Of Vent Pipes (dia:50mm) Item No 42 20.00 No S 1.0043 025 Visual Inspection And In-situ Repairs Of Sounding Pipes And Vent Pipes For Internal Tanks. Following Works To Be Undertaken:- (d) Repair/renewal Of Nut & Bolts Of Vent Pipe Flange Joints And Sounding Pipe Strainers In Flange Joints. Item No 43 60.00 No Of Pipe Joints/ Strainers 1.0044 025 Visual Inspection And In-situ Repairs Of Sounding Pipes And Vent Pipes For Internal Tanks. Following Works To Be Undertaken:- (e) Surface Preparation By Buffing/chipping And Painting Of Sounding Pipes And Vent Pipes Nb:-. (a) Material To Be Provided By Firm. (b) All Equipment (welding Plant/ Hand Tools And All Associated Accessories) For Undertaking The Said Job Including Consumables Like Ms Weld Electrodes And Gas For Cutting Is To Be Provided By The Firm In Quoted Price. (c) All Works Are To Be Carried Out As Per Standards Mentioned In No 01/15, Nes 155, Nes 706 Or Equivalent. (d) To Be Paid On Actual Scope Of Work Undertaken Based On Survey Item No 44 46.00 No S 1.0045 026 Repair/ Renewal And Painting Of Draft Markings:- (a) Survey And Repair Of Damaged Draft Marks, Including Fabrication And Welding On Hull. To Be Undertaken As Per Survey (paid On Actual) Item No 45 20.00 Nos 1.0046 026 Repair/ Renewal And Painting Of Draft Markings:- (b) Surface Preparation By Chipping/ Buffing And Painting Of Draft Marks Post U/w Llps Application Nb: (a) Paint And Steel Plate For Draft Marks To Be Catered By Vendor Item No 46 10.00 Sq.m 1.0047 027 Following Nos Of Such Reports To Be Provided Within 45 Days From Completion Of Refit: - (a) Print Copy (hard Bound, On Iso A4 Size Paper, Colour) Nb: - Following Documents Are Required To Be Submitted By The Contractor As A Comprehensive Report (relevant Sections To Be Vetted/ Approved By Class, As Applicable): - (a) Summary On Technical Specifications Of The Sdp, Service History, Present Refit, Work Order/ Contractor Details And Actual Scope Of Work Undertaken With Timelines. (b) Hull Survey And Action Taken Report. (c) Paint Survey And Maintenance Report Of All Areas/ Tanks/ Decks Etc. (d) Report On Survey And Repairs Of All Water Tight Access/ Closure Fittings/ Plugs Fittings. (e) Report On Survey And Repairs Of All Pontoon Fittings. (f) Report On Modifications If Any. (g) Report On Repair/ Maintenance Of Movable Dock -block Mechanism. (h) Report On Survey And Repair Of Pipes And Pipe Fittings. Item No 47 3.00 Set 1.0048 027 Following Nos Of Such Reports To Be Provided Within 45 Days From Completion Of Refit: - (b) Soft Copy In Cd/ Dvd (ietm L2 I.e. Indexed/ Searchable Pdf Format, Colour)