- Home
- >
- Tender
- >
- Chandigarh Tender
- >
- Department of COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH
- >
NTID 39822808
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Recarpeting Of Roads With Bitu, Chandigarh - Tender Details
Explore tender information for Recarpeting Of Roads With Bitu in Chandigarh, including eligibility, deadlines, and bid specifics.
COUNCIL OF SCIENTIFIC AND INDUSTRIAL RESEARCH
Chandigarh, Chandigarh, India
NTID 39822808
- Opening Date : Fri 11th April, 2025
- Closing Date : Wed 9th April, 2025
- ₹ 7501969.00
- NTID 39822808
Key Values: Document Cost: 0.00 | EMD: 150040.00 | Estimated Cost: 7501969.00
Tender Description
Recarpeting Of Roads With Bituminous Concrete Of Office Area In Csio Chandigarh
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
150040.00 -
Document Cost
Refer Documents -
Estimated Cost
7501969.00
BOQ Items Total Items : 6 | Total Qty : 14720
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On bituminous surface @ 0.50 Kg / sqm | 11750 | sqm |
| 2 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. | 470 | cum |
| 3 | Painting Kerb stones/ road surface marking with two or more coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on conc./ bituminous surface in white/yellow/black shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete make Asian paints, Berger or equivelent. | 1350 | sqm |
| 4 | Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | 550 | sqm |
| 5 | Supplying & Fixing of Molded Shank Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer s recommendation and complete as directed by the engineer.make 3M | 500 | each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054