Rate Contract For Providing Co, Guna - Tender Details

• Opening Date : Tue 17th December, 2024
• Closing Date : Mon 16th December, 2024

• ₹ 0.00
• NTID 38421112

Rate Contract For Providing Comprehensive Operation And Maintenance (oandm) Services For- Group B- Ashok Nagar Ga - Gst Rate To Be Quoted Here Which Shall Be Applicable On The Entire Contract For All Items Of Boq-1 And Boq2., Gst Component For Fixed Cost As Per Boq2, Group B: Guna (variable), Supervision And Logistic Charges 15% Of Total Manpower Charges, Establishing Area Emergency Office (aeo) , Local Customer Care Office (lco) , Hiring Of Erv, Hiring Of Motor Cycle For Pipeline Surv Eillance, "hiring Of Space For Area Emergency Office(aeo) With Necessary Facilities Viz.; Office Space For O&m Team, Pantry, Toilet, Erv Park Ing, Stores For Spares Fittings (including Free Issue Material), Detailed In Line With Technical Specification Of Tender. Minimum Area Of 1500 Square Feet In A Single Floor With Sufficient Space For Stores And Parking Facilities", "providing Er Vehicle (diesel/cng) With Driver (mahindra Bolero Camper Pick-up/ Tata Xenon Pick-up/ Equivalent, 4 + 1 Seater, (model 2024 Or Latest)) 24x7 For Routine And Break Down Maintenance Works At Site. Vehicle Should Be Latest Model Fitted With Gps Tracking Device And Adequate Space To Carry Consumables Tools & Tackles For Various O &m Activities, Fire And Safety Apparatus, Ppes, First Aid Box & Shall Also Be Equipped With 5kva Generator Set With Emergency Light. Minimum Erv Run Of 2000 Km Per Month With Start And Termination Point Will Be Aeo Office Or As Decided By Eic. Operation & Maintenance Cost For Erv Including Fuel Cost, Drivers Cost, And Spares Consumables Cost For Proper Upkeeping Of The Vehicle And Or Any Other Cost Pertaining To The Erv As Well As Drivers Are To Be Borne By The Contractor. Note: Escalation Of Price As Per Increase Or Decrease Of Fuel Price Above 10% As Per Escalation Clause Of Tender, Extra Running Km Of Erv Over And Above 2000 Km Per Month, "hiring Of Motor Cycle For Pipe Line Surviellance Personnel & Technician With Gps Enabled Mobile Devices For Monitoring And Surveil Lance & Safety, Mainteance Of Iocl S Pipelines Installations Etc. Minimum Motor Cycle Run Of 3000 Km Per Month With Start And Termin Ation Point Will Be Aeo Office Or As Decided By Eic. (zone Wise Bike For Pipeline Surveillance Designated Person Lco Is Considered Amd My Be Provided To Technician For Maintenace On The Recommendation Of Eic). Latest Model Or Later Having Capacity At Least 100125 Cc Note: No Proice Escalation For Motor Cycle Is Being Envaisaged In T He Tender.", Extra Running Km Of Motor Cycle Over And Above 3000 Km Per Month, Supply Of Materials Under Contractors Scope, Supply Of Pe Electrofusion Fittings As Per Tender Documents, Supply Of Reducer 125 X 90 Mm, Supply Of Reducer 125 X 63 Mm, Supply Of Reducer 90 X 63 Mm, Supply Of Reducer 63 X 32 Mm, Supply Of Reducer 32 X 20 Mm, Supply Of Coupler 125 Mm, Supply Of Coupler 90 Mm, Supply Of Coupler 63 Mm, Supply Of Coupler 32 Mm, Supply Of Coupler 20 Mm, Supply Of Equal Tee 125 Mm, Supply Of Equal Tee 90 Mm, Supply Of Equal Tee 63 Mm, Supply Of Equal Tee 32 Mm, Supply Of Equal Tee 20 Mm, Supply Of End Cap 125 Mm, Supply Of End Cap 90 Mm, Supply Of End Cap 63 Mm, Supply Of End Cap 32 Mm, Supply Of End Cap 20 Mm, Supply Of Saddle 125 X 32 Mm, Supply Of Saddle 125 X 63 Mm, Supply Of Saddle 90 X 63 Mm, Supply Of Saddle 90 X 32 Mm, Supply Of Saddle 90 X 20 Mm, Supply Of Saddle 63 X 32 Mm, Supply Of Saddle 32 X 20 Mm, Supply Of Saddle 63 X 20 Mm, Supply Of Elbow (90 ) 125 Mm, Supply Of Elbow (90 ) 90 Mm, Supply Of Elbow (90 ) 63 Mm, Supply Of Elbow (90 ) 32 Mm, Supply Of Elbow (45 ) 125 Mm, Supply Of Elbow (45 ) 63 Mm, Supply Of Elbow (45 ) 32 Mm, Tf 32mm X 1", Tf 32mm X 34", Tf 20mm X 12", Installation Of Valve In Pit Including Supply Of Pe Valves Supply Of Isolation Valves (as Per Data Sheet) And Installation Of Valves In The Valve Pits As Per Typical Drawing And Specification Enclosed And Instructions Of Engineerincharge. Payment Of Civil Construc Tion Of Valve Pits Shall Be Paid Separately As Per Relevant Sor., Supply Of Pe Valves 125mm, Supply Of Pe Valves 90mm, Supply Of Pe Valves 63mm, Supply Of Pe Valves 32mm, Supply Of Powder Coated Gi Pipes ( Cclass), Gi Fitting (is 1879) And Others As Per Tender Documents, Supply Of 12" Gi Pipe, Supply Of 34" Gi Pipe, Supply Of 1" Gi Pipe, Supply Of 1.5" Gi Pipe, Supply Of Copper Tube 12mm, Gi Fitings Of 1" Elbow, Gi Fitings Of 34" Elbow, Gi Fitings Of 12" Elbow, Gi Fitings Of 1" Hex Nipple, Gi Fitings Of 12" Hex Nipple, Gi Fitings Of 34" Hex Nipple, Gi Fitings Of 1" Nb Barrel Nipple, Gi Fitings Of 12" Nb Barrel Nipple, Gi Fitings Of 34" Nb Barrel Nipple, Gi Fitings Of 1" Couplingm, Gi Fitings Of 34" Couplingm, Gi Fitings Of 12" Couplingm, Gi Fitings Of 1" Plugm, Gi Fitings Of 34" Plugm, Gi Fitings Of 12" Plugm, Gi Fitings Of 12" Hex Plug, Gi Fitings Of 34" Hex Plug, Gi Fitings Of 1" Hex Plug, Gi Fittings 1" Union, Gi Fittings 34" Union, Gi Fittings 12" Union, Gi Fitings Of 1 " X 12" Reducerm, Gi Fitings Of 34 " X 12" Teem, Gi Fitings Of 1 " X 12" Teem, Gi Fitings Of 1" Teem, Supply Of 34" X 12" Bushm, Supply Of 34" X 1" Bushm, Supply Of Blind Meter Adaptor Gi ( Temporary Disconnetion Of Dom. Customers), Supply Of Meter Adaptor Brass For G1.6 Meter(domestic Meter), Supply Of Meter Adaptor Brass For G6 Meter, Supply Of Meter Adaptor Brass For G10 Meter, Supply Of Meter Adaptor Brass For G16 Meter, Supply Of Meter Adaptor Brass For G25 Meter, Supply Of 1"gi Powder Coated Clamp With Screw, Supply Of Isolation & Appliance Valve, Isolation Ball Valve (12"), Isolation Ball Valve (34"), Isolation Ball Valve (1"), Isolation Ball Valve (1.5"), Appliance Valve (14"), Appliance Valve (12"), Supply Of Ss Tubes,ss Fittings,& Ss Valves, Od X 0.095 Min Wall Thk., Ss Material Grade Tp316 Tp316l Seamless Tube As Per Astm A269, Od X 0.083 Min Wall Thk., Ss Material Grade Tp316 Tp316l Seamless Tube As Per Astm A269, End Connection: " Tube Od, For Stem & Npt (f) For Body Ss Material Grade Tp316 Tp316l As Per Astm A269; Rated Pressure : 5000 Psi 70 F Temperature: 0 F To 400 F, Plug: " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Plug: " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Cap: " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Cap : " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Union : Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Union : " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Reducing Union: Tube Od 34" X Tube Od 12", Ss Material Grade Tp316 Tp316l As Per Astm A269 (rated Pressure : 5000 Psi 70 F Tempera Ture : 0 F To 400 F), Equal Tee: Size 34" Od X " Od X " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 ( Rated Pressure : 5000 Psi 70 F Temperatu Re : 0 F To 400 F), Equal Tee: Size 12" Od X " Od X " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269 ( Rated Pressure : 5000 Psi 70 F Temperatu Re : 0 F To 400 F), Reducing Union Tee: " Od X " Od X " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperat Ure : 0 F To 400 F), Tube End Connection: " Od X " Od X " Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Tempera Ture : 0 F To 400 F), Front Ferrule: 34" Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Front Ferrule: 12" Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Back Ferrule: 34" Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Back Ferrule: 12" Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Male Connector: Size Npt (m) X 38 Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperatu Re : 0 F To 400 F), Male Connector: Size 12 Npt (m) X 38 Od, Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperat Ure : 0 F To 400 F), Ss Ball Valves: 2way Trunnion Mounted Normal Bore Ball Valve "(rated Pressure : 6000 Psi 70 F Temperature : 0 F To 400 F) With Add Itional 1 Set Of Nuts, Backs & Front Ferrule Etc., Ss Ball Valves: 3way Trunnion Mounted, Reducer Bore Ball Valve " Od End Connection And Npt (f) Bottom End Connection(rated Press Ure : 6000 Psi 70 F Temperature : 0 F To 400 F) With Additional 1 Set Of Nuts, Backs & Front Ferrule Etc., Cross: 34" Od X 34 X 34" Od X34" Od Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Conductive Core Thermoplastic Hose: 38 Id Conductive Core Thermoplastic Hose For Cng Service With Break Away Coupling, Cross: 34" Od X 34 X 34" Od X34" Od Ss Material Grade Tp316 Tp316l As Per Astm A269(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), Supply Of Steel Pipeline Leak Clamp (nominal Dia 12 10 8 6 4 Inch) At Designated Location Sites Including Transportation Of Le Ak Clamp, (standard Leak Clamp Of Length Of 60 Cm Has Been Assumed) (as Per Detailed Scope Of Work), 12", 10", 8", 6", 4", Supply Of Liquid Epoxy Paint Powercrete R95 Along With Applicator Pad Kit, Supply Of Gasket, Supply Of Spiral Wound Metallic Gaskets (12" X 300#), Supply Of Spiral Wound Metallic Gaskets (10" X 300#), Supply Of Spiral Wound Metallic Gaskets (8" X 300#), Supply Of Spiral Wound Metallic Gaskets (6" X 300#), Supply Of Spiral Wound Metallic Gaskets (4" X 300#), Supply Of Spiral Wound Metallic Gaskets (2" X 300#), "o&m Services The Cost Include All Expenses Towards Manpower, Tools, Tackles, Consumables Etc. Required To Perform The Activities To The Satisfac Tion Of Eic.", Hiring Of Machine Equipments For Maintenance Work. The Period Of Hiring Will Start After The Equipment Reaches At Site And Ends Whe N Equipment Leaves The Site. Break Down Period Of Equipment Will Not Be Paid. Normal Working Time Per Day Will Be 8 Hrs., Providing Hydra ( 1012 Ton Capacity ) Along With Belts, Chains, Hooks Etc At Site For Shifting Heavy Material Or Equipments Like Pip Es, Welding Machine, Cold Cutting Machine Etc.the Rate Is Inclusive Of Mobilisation And Demobilisation Cost, Hiring And Running Cost , Fuels, Consumables, Lube Oil Cost, Operator Cost Etc., As Per Direction Of Eic. Payment Towards Equipment Running Charges Shall Be Made Only If Payments Are Not Covered In Any Of The Sor Items Elese Where In This Contract., Hiring Of Crane 20 Mt Capacity, Hiring Of Ladder Up To 25 Feets, Hiring Of Concrete Rock Breaker, Mdpe Pipe Line Repairing Including Excavation, Leakage Arrest, Jointing And Restoration Of Any Dia Upto 63 Mm Including Supply And I Nstallation Of All Fittings Required. Mdpe Pipe Required Shall Be Issued By Owner As Free Issue Material. All Other Fittings Consum Ables Shall Be Supplied By Contractor, Payment Of Which Shall Be Admissible As Per Items List In Section "d". Rate Of Items Or Consu Mables Which Are Not Mentioned In Section D, Shall Be Supplied By Contractor, Mdpe Pipe Line Repairing Including Excavation, Leakage Arrest, Jointing And Restoration Of Any Dia Above 63 Mm Including Supply And Installation Of All Fittings Required. Mdpe Pipe Required Shall Be Issued By Owner As Free Issue Material. All Other Fittings Consu Mables Shall Be Supplied By Contractor, Payment Of Which Shall Be Admissible As Per Items List In Section "d". Rate Of Items Or Cons Umables Which Are Not Mentioned In Section D, Shall Be Supplied By Contractor, Maintenance Of Png Connections, "mainteance Of Dom Connection Leakage Testing (ldt) Leakage Testing (lpt With Digital Manometer) Clamping, Paint Touch Up Check Meter Working In Gas Flow Condition Leakage Identification & Rectification Checking Of Rcc Gaurd, Sand Filling And Cementing Checking & Reporting Of Unauthorised Extension Of Gas Pipeline & Rubber Tube Other Anomalies Checking Of Service Line, Meter Or Regulator ""o"" Ring Or Adaptor Repalcement Of Surakaha Hose In Case Of Damaged, Expired For All Points Etc. With Clamp. Replacement Of Oring For Arresting The Leakage From Adaptor Collect And Update Customer Contact Details (updation Of Mobile Numbers (primary And Secondary) And Email Id.", "miantenance Of Com Non Com Ndec Connection Leakage Testing (ldt) Leakage Testing (lpt With Digital Manometer) Clamping, Paint Touch Up Check Meter Working In Gas Flow Condition Leakage Identification & Rectification (alteration Charges Will Be Paid As Per Alteration Line Item) Checking Of Rcc Gaurd, Sand Filling And Cementing Checking And Reporting Of Unauthorised Extension Of Gas Pipeline And Rubber Tube Checking Of Service Line,meter Or Regulator ""o"" Ring Or Adaptor Repalcement Of Surakaha Hose In Case Of Damaged, Expired For All Points Etc. With Clamp & Oring For Arresting The Leakage From Adap Tor Collect & Update Customer Contact Details Mobile Numbers (primary And Secondary) And Email Id (material Will Be Supplied As Per Section C Expect Sand,cement, Paint And Cons Umables)", Attending Customer Service Requests And Resolving The Complaints In All Respects As Detailed In Scope Of Work And Special Conditions Of Contract And As Per Directions Instructions Of Eic Authorized Representative Including But Not Limited To Following: Venting, Fl Ushing, Modifications, Meter Regulator Change, Testing, Painting, Etc. In Gas Charged Area. Installation Of Clamps, Fittings And Har Dware Is In Scope Of Contractor. Any Additional Gi Pipe (if Required) In Case Dismantled Pipe Are Not Healthy Or Short, Item Shall B E Paid As Per Relevant Sor Item. Dismantled Pipe Fittings To Be Returned At Owner Store Or Site Office As Instructed By Eic., Gi Riser Testing (transition Fitting To Meter Isolation Valve) All Sizes, Internal Testing (meter Isolation Valve To Appliance Valve), Conversion Of Lpg To Png Png To Lpg Burner, Supply Of Steel Reinforced Rubber Hose With Clamps, Flame Problem, Meter Checking By Check Meter In Series, Replace Brass Connector Adapter, Dismantling Of Gi Pipe In Case Modification, Leakage Or Site Requirements 34", Dismantling Of Gi Pipe In Case Modification, Leakage Or Site Requirements 12", Dismantling Of Copper Pipe In Case Modification, Leakage Or Site Requirements, Reinstallation And Painting Of Gi Pipe Using Old Dismantled Pipe 34", Reinstallation And Painting Of Gi Pipe Using Old Dismantled Pipe 12", Reinstallation Of Copper Pipe Using Old Dismantled Pipe, Replacement Of Ss 316 Anaconda, Replacement Of Meter Regulator, Supply & Installation Route Marker, Pole Marker And Plate Marker,tlps, Warning Tape, Rcc Route Marker, Pole Marker With Foundation, Plate Marker, Polyconcrete Route Marker, Supply And Installation Of Type Atype A1type Btype C Type D Test Lead Point (tlps), Repair Of Type Atype A1type Btype C Type D Test Lead Point (tlps), Painting Of Piping And Structure Electrical Pole Crash Barrier Manhole Cover (paints And Other Consumables To Be Supplied By Contr Actor), Painting Of Wire Mesh Fencing (paints And Other Consumables To Be Supplied By Contractor), Installation Of Ss Tubinggi Pipes Including Bending, Testing & Commissioing With Consumable Such As Teflon Tap Etc For 14", 12", 34" , 38", 78"., Welding In Existing Structure, Pipe Etc Including Mobilization Of Welder, Machine For Grinding, Chipping Etc., Welding Rod As Approv Ed By Eic And All Other Consumables Required To Complete The Work In All Respects As Per Instruction Of Eicsite Engineer. Structural Steelpipe Etc Will Be Supplied By Owner., Excavation, Backfilling And Coat & Wrap Work, "coat And Wrap Work Coat And Wrap Work Of Welded Leak Clamp Over Pipe Length Including Cleaning Of Leak Clamp And Adjacent Pipe Section, Application Of Primer, Application Of Outer And Inner Layer Of Cold Applied Tapes. Coating Material Willl Be Provided By Iocl ", Excavation In All Types Of Rock (hard Ordinary) :excavation Work In Rock (all Types : Hard Ordinary) By Mechanical Means (hydrauli C Pneumatic Excavator & Hand Operated ) And Manual Means For All Ty Pes Of Rock (hard Ordinary) Including Disposal Of Excavated Ro Ck As Per Instruction Of Eic And Neaty Dressed For All Type Of Rock (blasting Prohibited). This Job Shall Also May Include Of Dept H 1meter Beneath Bottom Surface Of The Pipe. Site Supervision & Resource To Be Eployed As Per Direction Of Eic, Backfilling Of Excavated Pit Trecnch:backfilling Of The Excavated Pittrench By Hydraulic Means (jcb)manual Means, Soil (excluding R Ock) Removed During Excavation Of Trench (stored Within 50 M Radius Of The Excavated Trench), Coating Removal & Peel Off Test: Surface Preparation Of Pipe : Removal Of Three Layer Polyehylene Coating (3 Lpe): Coating Of The Pi Pe Surface Is To Be Removed By Mechanical Means I.e. By Chiesel And Onward Surface Preparation By Grinder For Cleaning The Coating B Ond Material With Portable Power Grinder Driven Emery Paper (duty Approved By Iocl). This Shall Be Inclusive Of Pipe Fitter, Grinde R, Helper Required For Cleaning Of The Pipe Surface., Application Of Primer & Cold Tape: Supply & Application Of Cold Tape Along With Primer : The Coating Material Should Be Of Make Dens O Raychem Equivalent Make Of Disired Length With 67% Overlapping ,, With Prior Application Of Primer On Pipe Surface As Per Manufac Turer Specification. This Shall Be Inclusive Of Applicator Along With All Requisite Tools, With 67% Overlapping. Installation Shal L Be Acceptable Only After Acceptance In Holiday Test. Also Match Stick Wherever Is Required For Minor Defects, Emergency Repair Works In Pipeline Pipeline Leakpilferageburstthird Party Damage (for Items Below), Mobilisation To Site Within Contractual Time With Manpower, Security Guard, Labour, Tools, Tackles, Cold Cutting Machine, Equipments And All Other Resources (eg Jcb, Compressors, Dewatering Pump, Dg Sets, Dumper, Trailer, Welding Generator, Hydra, Pickup, Dumper, Tents & Chairs Etc) With Fuels And Consumables Etc As Outlined In Tender Document For Execution Of Job. Rate Is Lumpsum Basis And Sh All Be Payable To Contractor On Complete Mobilisation To Site To The Satisfaction Of Eic. Rate Of This Item Is Also Inclusive Of Dem Obilisation Charges With All Manpower, Material And Resources Deployed At Site After Completion Of Work. The Contractor Shall Also L Iasion With Local Villager, Concerned Authority, Local Police For Safe And Secure Rectification Of The Work. Apllicable When Distanc E Between Two Adjacent Site Is More Than 2.5km. This Is For Mobilisation & Demobilization. Separate Payment Will Be Made For Hire An D Operation Charges Of Jcb, Pick Up Vantractor For Shifting Owners Material To Site, Dewatering Pump, Dg Sets, Tent, Watchman Only. Other Resourcesmanpower & Machinery, Equipment (except As Above) Required For Completion Of Restoration Of Emergency Site To Be Pro Vided By The Contractor & Rate Is Inclusive In This Item., Providing And Operating Items For Attending The Job At Site, As Per Job Requirement & At Iocls Descretion.one Day Shall Be Of 8 Hou Rs Duration Of Uninterrupted Availability For Continuous Usage Of The Deployed Service, I.e. For The First Eight Hours Or Part There Of From The Time Of Deployment Contractor Shall Be Paid Amount Equal To One Day. (i.e. 1 Equipment Day = 8 Hrs Of Deployment And Av Ailability For Contnuous Usage). The Working Hours Shall Start From The Time Of Deployment At Site. This Will Be Inclusive Of Opera Tional Charges (fuel, Consumables, Operator Etc Whatsoever Is Required For Intended Operational At Site); Job Is To Be Carried Out A S Per Tender Document And As Per Instruction Of Eic. Any Additional Deployment Beyond Eight (8) Hours, Shall Be Paid Extra As Addit Ional Proporationate Day, And Shall Not Be Liable For Any Short Of Overtime Payment In Any Form. (i.e. For Deployment Of Any Sort O F Following Services For A Period Of 10 Hours In A Day, Same Shall Be Paid As 1.25 Days (for Items Below), Tractor :tractor With Fuel, Operator For Transportation As Per Job Requirement (for Owner Supplied Items), Dewatering Pump: Providing And Operating Diesel Engine Driven (of Capacity Not Less Than 5 Hp) Water Pump Set Including Including Op Erator, Fuel, Hose Length Of Suction Discharge Side Of Atleast 30 Meter For Continuous Functioning Of The Same At Site, Providing And Operating Atleast 25 Kva Dg Set For Welding Of Leak Clamp, Weld Plus End Or For Any Other Job In Mainline Including Op Erator & Fuel, Portable Dg Set: Providing Portable Dg Set (5 Kva) For 230 Volt Power Supply For Lighting Buffing Grinding Ut Xray Etc. Includin G Mobilisation And Demobilisation Charges, Operator, Fuel Etc For Continuous Functioning Of The Same At Site, Halogen Focus Set: Providing And Temporary Installation Of Halogen Focus Set With 30 Mtr. Extension Cabel Including Spare Lamp 100 0 Watt For Illumination Of Working Area, Additional Service Crew For Mechanical Miscllaneous Job As Directed By Eic For Miscllaneous Mechnical Job Inclusive Of 1 Pipe Linefi Tter & 2 Rigger Along With Technician Tool Boxes, Consumbales Etc. One Day Shall Be Equivalent To 24 Hrs., Providing & Operating Jcb For Earth Work In Excavation In Both Ordinary & Rocky Soil For Row Cleaning, Washout Rectification Install Ation Ofanode Ground Bed, Sacrificial Anodes, Cable Trenches, Pipelinetrenches, Etc. Including Backfilling The Same After Completion Of Workin All Respect And Up To The Satisfaction Of Site Engineer Eic & Thecost Includes All Labour, Materials Complete As Per Dir Ection Of Siteengineer Eic., Providing The Air Compressor Of Minimum 250 Cfm Capacity For Other Than The Emergency Works (leak Pilferage Burst) As Per Need Ba Sis In Row Works As Per Direction Of Eic. One Day Shall Be Equivalent To 24 Hrs., Providing Tent Of Minimum Size 10m X6 M, Chair50 Nos, Etc. One Day Shall Be Equivalent To 24 Hrs., Site Grdaing: Surface Dressing (cleaning, Levelling, Stripping Etc Whatsoever To Make Approachable Access For Movement Of Machinarie S At Intended Site) Of The Ground Including Removing Vegetation And In Equalities Not Exsceeding 30 Cm Deep And Siposal Or Fubbish, Lead Upto 50 M And Lift Upto 1.5 M All Kinds Of Soil Surface, As Per Job Requirement & Directions Of Engineerincharge., Earth Work In Excavation In All Kinds Of Soil, Both Wet & Dry Condition (except Hard Rock Requiring Blasting, Chiselling Pneumatic Drilling) For Foundation, Substructures, Trenches, Sumps, Pits Etc. To The Following Depths Including Shoring, Strutting, Trimming O F Sides Of The Trenches, Dressing, Ramming And Levelling The Bottom Of The Trenches Correct To Level, Grade Etc. Including Bailing O Ut Of Water (if Any), Stacking Selected Excavated Earth For Backfilling, Filling Available Excavated Earth In Trenches, Foundation, Plinth Etc. Andor Disposing The Excess Earth Outside Iocl Premises To An Unobjectionable Area With All Leads & Lifts, Etc. Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Direction Of The Site Engineereic., Excavation Up To 2.5 M All Kind Of Soil Except Hard Rock (measured From Original Ground Level), Excavation Bw 2.5 M To 5 M All Kind Of Soil Except Hard Rock, Excavatiopn Bw 5 M & Up To 50 M All Kind Of Soil Except Hard Rock, Hard Rock Removal Excavation And Backfilling In Hard Rock (requiring Blasting Chiselling Pneumatic Drilling) Dewatering If Require D, Consolidating The Trench Bed, As Per Drawing Andor The Direction Of The Eic., Backfilling Of Excavated Pit Trecnch:backfilling Of The Excavated Pittrench By Hydraulic Means (jcb)manual Means, Soil (excluding R Ock) Removed During Excavation Of Trench (stored Within 50 M Radius Of The Excavated Trench)., Manual Excavation (restricted Area Without The Use Of Jcb) In All Type Of Soil Including Hard Murrum For Exposing Existing Pipeline , Bottom Clearance Including Keeping Top Layer Of Soil Seperately, Shoring, Shuttering, Stacking Of Soil, Followed By Backfilling Of The Trench . The Contractor Shall Properly Compact The Backfilled Earth & Restore The Row To Original Condition As Per The Directio N Of Eicsite Engineer., "removal Of Pilferers Welding Arrangement When Pipe, Flange And Valve Assembly Found Welded Over Mainline Pipe With Or Without Patch Welding: Removal Of Welded Valve And Pipe Assembly With Grinding Cutting Machine. All Resources Required (machinery, Manpower Etc) For The Cutting Purpose Will Be Provided By The Contractor Including Charges Of The Cutter Grinder Complete In All Respect As Per Direction Of Eic Site Engineer Site Represe Ntative", "welding And Fitting Leak Clampweld Plus End (max Length Upto 1000mm) : Fitting And Welding Of Leak Clamp On Pipe After Depressurising And Venting Of Gas From The Mainline, Fitting, Tightening And Welding Of Leak Repair Clamp Shall Be Carried Out. Contractor Shall Give All Required Assistance For Depresurising Venting Of Gas From The Line, Temporarily Plugging Leak Point, Assistance For Closure Of Mainline Valve In Upstream & In Downstrem Of Leak Point , Additiona L Valve Closure (if Required). Only Leak Clamp Shall Be Provided By Owner From Nearest Owner Store Yard. Removal Of Old Coating, Cle Anning Of Pipe Surface, Fitting And Welding Of Leak Clamp Of Length Maximum Upto 1000 Mm, Over Mainline Pipe With All Tools Tackles, I.e. Hydra, Welding Machine And Qualified Welder Under The Direction And Supervision Of Site Engineereic. Fitup & Welding Charges I Nclude Fuel Charges For The Dg Machine, Charges Of The Welder, Fitter, Helper, Grinder And Supervisor , Cost Of Welding Rods, Other Accessories Etc. Complete In All Respect. Welding Of Leak Clamp Includes Welding Circumferentialy And Longitudinaly Including Weldin G Of Fasteners (nuts &bolts), Testing Of Welding Integrity With Dye Penetration (dp) Test Complete In All Respect As Per Direction O F Eic Site Engineersite Representative.", 12", 10", 8", 6", 4", Sleeving Of Mainline: Type B: Fabrication, Fitment And Welding Of Full Encirclement Sleeves From Owners Supplied Pipes Over Pittedde Fect Sections Of The Exposed Pipeline Including Testinginspection (dp Tell Taletest), Supply Of All Equipment, Consumables, Labor Et C. Required To Complete The Work In All Respects As Per The Specifications And Direction Of The Site Engineereic. Pipes Will Be Supp Lied By The Owner From Owners Store Yards And Shall Be Transported To Site At The Contractors Risk & Cost., 12", 10", 8", 6", 4", Flood Coating By R95 Powercrete Liquid Epoxy Paint (consisting Part A & Part B Mixed In Ratio As Per Manufacture Recommendation Over Mainline Pipe Leak Clamp Weld Plus End Sleeve Etc. Including Surface Preparation As Per Tender Specification & Application Of Liqu Id Epoxy Paint (powercrete R95) Over Finished Surface. The Cost Includes All Materials( Liquid Epoxy R95) Consumables, Labour Etc. T He Thickness Of Flood Coating Shall Be 9001000 Micron., "coating Refurbishment: Cost Of Coating & Wrapping Refurbishment On Diffrent Size Pipes Section Welded Leak Clamp Or Adajacent To Sleeving Or On Sleeve With Owner Supplied Cold Applied Tape As Per Specifications Directions Specified In Scc In All Respects. Work Includes Removal Of Old Coating, Pipe Cleaning By Sand Blasting, Primer Application, Coating Application ( Inner & Outer). Payment S Hall Be Made Depending Upon Pipeline Size As Per Following Separate Pipeline Sizes., 12", 10", 8", 6", 4", Laying, Spreading Of Morrum For Road Diversion: Laying, Spreading Of Morrum By Deployment Of All Required Machinaries, Tools, Manpow Er, Whatsoever For Making Road Diversion As Per Job Requirement And As Per Iocls Requirement., "road Cutting Cutting Bituminous Or Water Bound Macadam Road, Stacking The Material And Making Good The Same As Previous Including Supply Of Extra Quantityof Aggregate, Moorum Grit And Bitumem Etc. Required, Disposal Of Surplus Earth If Any Complete As Per The Description Of Ei C. Job Includes Supply Of All Labour, Equipments Etc.", Providing Nitrogen Filled Cylinder Each Of 7m3 Capacity At 140300 Bar, As And When Required Basis Including Hose Assembly (hose Leng Th 10 M Minimum) Fitted With Flange 2 Inch 300#1 Inch 300# On One End Nd Regulator With Valve On Another End However, Cylinder Shal L Be The Property Of The Contractor., Deployment Of Dedicated Security Guardwatch Man At Site For Safety And Security Of Pipeline During Exigencies. The Security Guards S Hall Be Deputed At Site On 24*7 Basis Till The Completion Of The Work And Closure Of Site. The Security Guard Shall Remain Available At Site To Protect Pipeline From Any Untoward Activities. The Unit Of Measurement Ea Means Shift Of 8 Hours By One Security Guard ., "hire Charges For Labour For Emergency Works: Note: Payment For Labour Charges Under This Item Will Be Made Only For Work Carried Out Other Than Work Mentioned In Other Sor Items Of The Tender And As Per Direction Of Engineerincharge. Unit Per Labour Per Day Is Shift Of 08 Hours.", Transportation Of Pipe:taking Delivery And Transportation Of Ownersupplied Coatedbare Pipe (upto Length Of 12m Of Od 4"6"8"10"12") T O The Leakpilferageburst Site In Cgd Bihar From Designated Stockpile Location At (iocl Ga Of Bihar),loading And Unloading, Inspectio N Of The Coatedbare Pipes Visually And With Holiday Detector For Defects, Arranging All Necessary Intermediate Storage Area Required Thereof Till The Pipe(s) Are Installed In Permanent Position.carrying Out Repair Of Pipe & Coating Defects For Defects Occurring Af Ter "taking Over" Of Pipes From Owner, Replacement In The Case Of Nonrepairable Defects And Repairing Damages To Pipe Coating Includ Ing Defects Damages Occurring During Transportation & Handling.payment Will Be Made Per Trip Of Trailor., Pipe Cold Cutting: After Ventingof Gas From The Piping, The Contractor Shall Arrange Suitable Cold Cutting Machine Set Up, Associat Ed Tools & Tackles, Operators, Consumables, Compressor, Hoses, Nitrogen Etc. To Cut Pipe At Mentioned Location As Per Instructions O F Engineerincharge Site Engineer(the Location Shall Be Accessible For Installation Of The Cold Cutting Machine Before Carrying Out T He Job Which Is Not Covered In The Scope Of This Item). The Contractor Scope Is Including All Required Manpower, Equipments, Tools, Tackles, Materials, Consumables Etc. For Completion Of Work In All Respects As Per Instructions Of Engineerincharge Site Engineer. N Ote: Unit #ea# Shall Mean One Full Circumferential Cut., 12", 10", 8", 6", 4", Lowering & Fitting Of Pipe Shifting Of Pipe From Designated Place At Site To Work Place, Lowering Of Pipe In Trench (up To 05 Meter Depth) On Sleeperssand Bags, Cutting, Grinding, Fittings To Match The Mating Edges Of Different Thickness, Alignment Of Pipe, Fitup, Tieingin And Making Pipe Ready To Hookupfitting Of Weld Plus End With Existing Mainline On Both Side, Including Fixing Of Half Cou Pling Etc, Repair Of Damaged Coating, Making Through The Pipeline Etc As Per Standard Operating Procedure And As Per Instructions Of The Engineerincharge To His Satisfaction Including Supplying Of All Types Of Tools & Tackles, Lifting Arrangements, Equipments, Hyd Ra All Consumables & Labour Etc To Complete The Work In All Respects In A Workman Like Manner Including Area Preparation For Hot Job S, Area Cleaning After Completion Of Work, Flushing Wherever Required, Cleaning Of Pipes Externally Off All Foreign Materials Like W Eld Beads, Clamps Fixtures Etc. Used In Fabrication. Payment Will Be Made For Each Pipe Upto 12 Meter. Rate Is For 12 Inch Pipe, Fo R Other Dia Rate To Be Prorated., Hook Up Joint Edge Preparation Of Pipe, Welding Using Approved Welding Electrodes, Nitrogen Purging, Mud Plugging, Ultrasonic Thickn Ess Of Pipe, Dp Test, Fitting Welding Of Tor & Tapping, 100% Radiography Including All Consumables, Equipments, Welder & Helpers, To Ols & Tackles, Testinginspection Etc To Complete The Work In All Respect With All Safety Precautions As Per The Codesspecifications, Drawing And Direction Of Eicsite Engineer. Tor Fittings & Foam Pig Shall Be In Scope Of Owner. Payment Will Be Done On Per Joint We Lding Basis., 12", 10", 8", 6", 4", Electrical & T & I Services, Operation And Maintenace Of Scada, Blowing Of Optical Fiber Cable : All Activities Pertaining To Blowing Of Optical Fiber Cable In Self Lubricated Hdpe Telecom Duct ( After Testing Of Drum At Site),through Cs Hdpe Conduits At Crossing, Cable Sealing, Padding, Backfilling Etc. Using All Materials Re Quired, Etc. All Complete As Per Specifications And Drawing Provided In The Bid Document & As Per Direction Of Consultant., Supply And Installation Of Jointing Pits, Including Sand, Etc. All Complete As Per Spec., Drawing Provided In The Bid Document And T He Direction Of Client Consultant., Jointing Splicing Of Optical Fiber Cable ( 24 Fibers ) Including Supply And Installation Of Joint Kit, Joint Markers (rf Id Disk Ty Pe), Etc., Testing All Completed As Per Specifications & Drawing Provided In The Bid Document And Direction Of Consultant., Supply & Installation Of Optical Splice Closer As Per Specifications & Drawing Provided In The Bid Document And Direction Of Client Consultant, Supply & Installation Of Fiber Termination Cabinet As Per Specifications & Drawing Provided In The Bid Document And Direction Of Cl Ient Consultant, Ultrasonic Thickness Testing At Designated Locations As Informed By Engineer In Charge, Noise Level Survey At Designated Locations As Informed By Engineer In Charge, """supply Of Lamps Supply Of Below Given Ms Philips Or Equivalent Make Lamps For Installation In Lighting Fittings Fixtures As Per Directions Of Eic. Led Tubelight 18w", Electrical Wiring (comprising Of Single Or Twin Core Pvc Wires Upto 6 Sq Mm And Single Earth Wire Upto 6 Swg) Along With Its Connected Accessories Like Junction Boxes, Surface Conduits, Battons, Switch Boards Etc., Supply & Instln. Of Fuse Parts (knife Type Hrc Fuse Link) 80 100 Amp Size 000, """supply And Installation Of Flp Junction Boxes""4way Exe, Wp Junction Box With Threded Cover", "supply & Installation Of Pressure Gauge ", "supply & Installation Of Temperature Gauge ", Supply Laying & Installation Of Gi Earthing Strip 40x5 Mm, Supply & Installation Of Flp Lights At Cng Stations., Tcpsupply And Installation Of Mg Anode(7.6 Kg) :supply & Installation Of Prepacked Mg Anode (7.6 Kg) With One Cable Including 1cx10 Sq.mm Unarmoured Cable (with Sufficent Length) & Encapsulation Kit For Cable Connection Termination Of Anode Tail Cable In The Tlp E Tc. Complete In All Respects As Per Direction Of Engineerincharge., Tcpsupply And Installation Of Zinc Anode(40 Years Design Lifemin. 22kg) For Ht Line Crossings: Supply & Installation Of Prepacked Zi Nc Anode (40 Years Design Life Min. 22 Kg) For Ht Line Crossing With One Cable Including 1cx25 Sq.mm Armoured Cable (with Sufficent Length), Encapsulation Kit Termination Of Anode Tail Cable In The Tlp Etc., Fcri Calibration Of Master Mass Flow Meter: Fcri Calibration For Flow Meter Which Includes Removing Mfm,transporting To Fcri And Rei Nstallation Of Mfm.charges Include All Charges Of Labour ,transportation ,removing And Reinstallation, Quarterly Maintenance And Calibration Of Portable Multi Gas Detectors, Fixed Hydro Carbon Detectors(4 No S At Cgs) ,fire & Gas Detec Tion System At Cgs., Maintenance And Calibration Of Portable Multigas Detectors. The Charges Includes Cost Of Calibrating Canisters,inspection, Maintenen Ce Of The Detectors And Issuance Of The Calibration Certificates., Maintenance And Calibration Of Fixed Hydro Carbon Detectors, Fire & Gas Detection Including Breakdown Maintenance And Scheduled Main Tenance As Per Tender Specification And Issuance Of The Calibration Certificates., Design, Engineering,supply Including Packing And Forwarding, Transportation, Delivery At Storage, Of The 1.1kv Grade Xlpe Insulated , Pvc Sheathed, Frls Power And Control Cables (conforming To Is:7098 And Specification) Of Following Sizes In Trenches Excavated Und Er Ground Trench Trays, Pulling Through Pipes And Its Proper Sealing, Cutting Of Paved Area, Roads Etc., 3.5x 50 Mm2 A2xfy, 4x 6 Mm2 2xwy, 4x 2.5 Mm2 2xwy, Electrical Works (erection), 25 Sq Mm Green Fexible Copper Wire(approx 10mtrs) Along With Two Nos Clamps Harware Etc Shall Be Complete Including Mettalic Cover B Ox(suitable For Outdoor) ,size 400x400x200 In All Respect To Earthingground Of Lcv At Two Points., Shock Hazard Charts Complete With Frame And Glass, First Aid Boxes, Caution Boards (danger, High Volatage) Including Supply Of Necessary Clamps, Bolts And Other Hardware., Single Line Diagram Complete In Glass Frame.(size 600x800mm), Insulating Mats Supply & Installation, Supply Of Insulating Mats 11kv Grade (as Per Is:15652 2006) Of 1000mm Width, Required For Maintenance Of Electrical Equipment In Su Bstation As Required Including Cutting To Required Shape In Running Length And Including All Labour And Materials Etc. Complete And As Per Directions Of Engineerincharge As Per Applicable Indian Or International Standards And Indian Electricity Rules., Cable Trench:, Excavation In Unpaved Areas Of Earth In Work Sites For Conventional Cable Trenches For A Depth Upto 1.5 Metres Including Shoring, Strutting Etc. (if Necessary), Backfilling The Trench, Job Complete In All Respects, Including All Labour And Materials Comple Te As Per Drawings, Specification And Directions Of Site Engineer Engineerincharge, Cable Laying Laying Of All Type Of Cables Lt (pvc Xlpe Armouredunarmouredpower Control Signalling) In Trenches, In Cable Racks , In Trays, In Protective Pipes, Poles, Columns, In Conduits, In Panels And On Structures Etc.; Including The Supply And Installatio N Of All Required Materials Such As Fixing Clamps, Screws, Cable Straps, Tags, Etc. As Required (other Than The Supply Of The Co Nduits, Cables, Pipes, Cable Racks, Trays, Poles, Structures And Panels) Complete In All Respect, Including Cost Of All Labour, T Ools, Consumable Materials, Etc. And Cutting The Cables In Required Lengths As Per Drawings, Specification And Directions Of Site Engineer Engineerincharge:, Power Cables Lt : Od Upto 20 Mm, Power Cables Lt : Od Above 20 Mm And Upto 40 Mm, Power Cables Lt : Od Above 40 Mm And Upto 60 Mm, Power Cables Lt : Od Above 60 Mm, Sand Filling:, Supplying And Spreading Of Approved Quality Fine Dry River Sand In Cable Trenches Including The Cost Of All Material, Transport, Loa D And Lift Charges, Labour, Tools And Tackles, Consumables Etc , As Per Drawings, Specification And Directions Of Site Engineer Engineerincharge, Brick Soling, "supply And Laying Of Approved Quality 75 Mm Thick Second Class Brick Flat Soling With Sand Filling In The Interstices, In Cable Tre Nches For Protectionincluding The Cost Of All Brick And Sand, Labour, Load And Lift Charges , Tools And Tackles Etc , As Per Drawing S, Specification And Directions Of Site Engineer Engineerincharge. M2 764.39 854.50 18.08.2021 78 Electrical Pjdcsw3009 Composite Cable Marker: Supply, ", Cable Marker:, Supply, Erection & Installation Of Ms Cable Markers, Including Excavation, Installation Of The Markers, Cement Concrete Grouting, Ba Ckfilling, Materials, Labour, Tools And Tackles, Consumables Etc , As Per Drawings, Specification And Directions Of Site Engineer Engineerincharge., Lt Cable Joint (1.1 Kv) Making Straight Through Joints On Alcu Conductor Xlpepvc Insulated Armoured Cable Including The Supply Of R Equired Materials Such As Cable Jointing Kit (of Heat Shrinkable Sleeve Type Of Raychemmseal3m) , Materials, Labour, Tools And Tackl Es, Consumables Etc , As Per Drawings, Specification And Directions Of Site Engineer Engineerincharge:, Power Cables Lt : Od Upto 20 Mm, Power Cables Lt : Od Above 20 Mm And Upto 40 Mm, Power Cables Lt : Od Above 40 Mm And Upto 60 Mm, Power Cables Lt : Od Above 60 Mm, Earth Electrodes:, Supplying, Installation, Testing Of Gi Earthing Electrode, Including The Supply And Installation Of The Ci Cover, Charcoal Special Backfill Etc. And Construction Of Chamber; Complete As Per Drawings,specifications And Directions Of The Site Engineer, Including T He Cost Of All Labour, Tools, Materials Etc. Complete In All Respects., Earthing Plate:, Supply & Installation Of G.i. Earthing Plate As Per Standard Drawing Outside The Buildings. The Item Also Includes Grouting Of The P Late As Shown In The Drawing. The Item Should Be Complete In All Respect Including All Materials, Tools, Tackels Etc. And As Per Dir Ection Of Eic Site Engineer., Earth Strip Wire Rope Cable Supply, Installing And Testing Of Earthing Stripwireropecable For Completely Making The Earthing Gr Id System By Supplying, Laying The Gi Cu Strip And Making All The Necessary Welding Joints, Connecting To The Earthing Electrod Es And Existing Earthing Grid Etc., Complete As Per Drawings, Specifications And Directions Of The Site Engineerengineerincharge, Including The Cost Of All Labour, Tools, Materials, Etc. Complete In All Respect:, 50 Mm X 6 Mm G.i. Earthing Strip, 25mm X 4 Mm Copper Flat, Ss Tube & Fitting Supply, Laying & Testing, Supply, Laying, Testing And Commissioning Of Ss Tubes Along With Fittings As Per Technical Specification, Typical P & Id For Type Of Cng Station And Scope Of Work, Handling, Lifting, Transportation From Stores To Cng Stations., Od X 0.095 Min Wall Thk. Ss Tube (refer Ts Section Iii A) Unit Is Running Meter, Od X 0.083 Min Wall Thk. Ss Tube (refer Ts Section Iii A) Unit Is Running Meter, Quick Connect Body & Stem, Qrc Of 38" Npt , End Connection: " Tube Od, For Stem & Npt (f) For Body Material Ss316; Rated Pressure : 5000 Psi 70 F Temperatu Re: 0 F To 400 F, Nut, " Od, Material : Ss316(rated Pressure : 5000 Psi 70 F Temperature : 0 F To 400 F), " Od, Material : Ss316(rated Pressure : 6000 Psi 70 F Temperature : 0 F To 400 F), Supply , Laying, Testing And Commissioning Of Ss 304 Tubes Along With Isolation Valves, Reducers & Fittings Etc.as Per Technical Spe Cification, Typical Schematic Drg. For Ins. Air Line Of Cng Station And Scope Of Work Including Handling, Storage,lifting, Transpor Tation Upto Cng Stations. (note:total No.of Ferrule Fittings May Be Considered As One Jointing Ferrule At Every 5.0 M), 14 Od X 0.035 Min Wall Thk. Ss Tube (refer Ts Section Iii A), "erection Of Mech. Equipment ( Transportation Required)", "handling (including Lifting And Transportation From Clients Store Within City To Cng Stations) And Erecting In Position, The Fol Lowing Equipment Either On The Foundation At Ground Level Or On Roof At 3.5 M Above Ground Level. Contractors Scope Shall Include Supply Of All Material And Accessories Including But Not Limited To Any Fixtures, Clamps, Gasket, Nut Bolts, Etc. : Note: The Quantities Given Above Against Individual Items Are Indicative And Shall Not Be Considered To Be Binding. The Quantities May In Crease Or Decrease At Site At The Time Of Actual Execution And As Per The Discretion Of Owner Engineerincharge. The Unit Rate Shall Be Operated To Work Out The Final Payment Due To Contractor.", Cascade 45003000 L Water Capacity. Erection At + 4.0 M Level (refer Ts Section Iii B), Dispenser Erection At + Ground Level, "supply, Erection & Commissioning Of Following Miscellaneous Items As Per Technical Specification And At Locations (within The Stati Ons) As Directed By Eic Fire Fighting Equipments : Sand Bucket With Stand And Canopy (4 Nos. On Each Stand) ", Conversion Of Dbs To Onlinemother Station, Decommissioning Of Ss Tubing, Dismentalling Of Ss Tubing, Providing Connections With Online Compressorcascadedispenser As Required I Ncluding Installation Of Fittings & Relacement Of Damaged Fittings (supply To Be As Per Relevant Sor Item) , Retesting Of Already La Id Tubings, Installation Of Valves (supply As Per Relevant Sor), Providing As Build P&id Drawings, Etc. Completing All Tubingmechan Ical Work To Complete The Conversion Of Dbs To Online Station. Any Fresh Supply & Laying Of Ss Tubing To Be Paid Separately As Per R Elevant Sor Item., Disconnecting Reconnecting All Air Pipingtubing , Loading, Transportation & Unloading Of Compressor At Designated Locaation (within Ga Boundary),, Disconnecting All Electrical Connections With Booster Compressorpanelother Equipment, Relayingtesting Of Used Cables If Required, Di Sconnection Of Earthing Grid From Compressorpanelother Equipment & Recoonection With Online Compressor, Repair Of Earth Elecrodes Et C. Any Fresh Supply And Laying Of Cablegi Stripearthing Electrod To Be Paid As Per Relevant Sor, Electrical Works (supply & Installation), Street Lighting, Integral Flame Proof Well Glass Fixture (cmifr Approved For Zone12 Gas Group Iia & Iib) With 100 W Led Luminaire Wi Th Flame Proof Control Gear, Flame Proof (cmifr Approved) 12" Exhaust Fan.0.25hp Motor,1440 Rpm. (preferred Make: Baliga, Fcg, Cgl, Prompt), Stainless Steel Inscription Plate:, Supply And Installation Of Approved Quality Stainless Steel Name Inscription Plates Including Anodising, Engraving The Inscriptions, Providing Screws, Etc. For Equipments Viz. Motors, Motor Control Centres, Switchgears, Push Button Stations Etc. As Required, Provi Ding Necessary Holes Tapping Etc. And Fixing The Same Complete In All Respect As Per The Direction Of Site Engineerengineerincharge Including The Cost Of All Labour, Tools Etc., Supply, Fixing And Connection Of Following Fuse Base (holders) For Hrc Fuse Link Of Mhavellsl&t G Ec Astholmstandard Mds Make Or Ap Proved Equivalent In Distribution Board Etc.all Complete With Labour And Materials As Per Direction Of Engineerincharge., 100 Amp ( Open Type Fuse Base) For Fuse Type Cd00, 125 Amp ( Open Type Fuse Base) For Fuse Type Cd00, 250 Amp ( Open Type Fuse Base) For Fuse Type Cd1, "supplying And Fixing 5 Amps. To 32 Amps. Rating, 240 415 Volts, 50hz, 10ka C Curve, Miniature Circuit Breaker (suitable For M Otor And Other Inductive Loads And Conforming To Is 8828: 1996, Iec 60898: 2002) Of Following Poles In The Existin G Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Note: Isi Marked Mcbs Of Havells Loadster Indo Kopp Or Equivalent Make Shall Be Used As Per Direction Of Engineer Incharge.", Single Pole, Single Pole And Neutral, Double Pole, Triple Pole, Triple Pole And Netural, "providing And Fixing Of Metal Clad, Rewireable Type Switch Fuse Unit Confirming To Is: 13497 (parti & Ii) Of Following Ratings (amp Volt) Including Drilling Holes On The Board, Connections, Earthing The Body Etc. As Required. Note: Sfu Of English Electric L&t Crompton Havells Standard Equivalent Make Shall Be Used As Per Direction Of Engineerincharge.", 63a 415v, Tripple Pole & Neutral, 100a 415v, Tripple Pole & Neutral, 200a 415v, Tripple Pole & Neutral, 16a 240v, Single Pole & Neutral, 32a 240v, Single Pole & Neutral, Supply Of Led Indication Lamps For Panel Indications Redgreenyellowwhite Etc. 240vac As Per Direction Ofengineerincharge., Supply Of Three Phase Digital Ammeter, 01000a, 15 A,class 0.5, 240vac Aux Supply As Per Direction Of Engineerincharge., Supply Of Three Phase Digital Voltmeter, Class0.5, 240vac Aux Supply As Per Direction Of Engineerincharge., Providing Salt And Charcoal For Pipe Earth Electrode As Required., 64 Kg Charcoal And 5 Kg Salt, 160 Kg Coke And 5 Kg Salt, Lt Cable End Termination For Armoured Pvc Insulated Aluminium Cable With Single Compression Brass Glanding (excluding Cost Of Glands & Lugs) :providing End Termination Of Powercontrol Cable Including Cutting, Stripping, Fixing Lugs, Cable Insulation, & Gland Ing With Single Compression Heavy Duty Brass Cable Gland Wherever Specified, Fixing Aluminium Lugs For Power Cables And Copper Connectors For Control Cables, Crimpingsoldering, As Necessary, Restoration Of Insulationclamping Of Cable, Tagging With Aluminium T Ag,earthing Of Armour, Connection To The Equipment Terminals Etc. All Complete As Per Standard And Direction Of The Engineerincharge ., 3 X 25 Sqmm, 3 X 50 Sqmm, 3 X 120 Sqmm, 3 X 150 Sqmm, Providing Aluminium Lugs For Maintenance, Supply Of Aluminium Tube Terminal Heavy Duty (crimping Cable Lug) Of Kse Dowells Make Or Equivalent Certified By Eic. Of The Follow Ing Sizes., 25 Sqmm, 50 Sqmm, 120 Sqmm, 150 Sqmm, Dg On Hire Basis, Providing Dg On Monthly Hire Basis For Cng Stations Including Mobilizing And Demobilizing Charges, All Required Manpower, Tools, Tac Kles And Complete In All Respects As Per Directions By Eic., 62.5 Kva For Dbs Cng Stations, 125 Kva For Ols Cng Stations, Diesel Charges Per Litre, Supply And Installation Of Shock Hazard Chart As Per Ie Rules 1956 (clause44) Complete With Frame And Glass Includin G Necessary Clamps, Bolts, Rawl Plugs, Etc. Breachking And Making Good The Wall If Required. All Complete With L Abour And Materials As Per, Supply And Installation Of "caution Boards" At Substations As Per Is2551upto Date Including Supply Of Necessary Clamps, Nuts, Bolts And Other Hardware. All Complete With Labour And Materials As Per The Direction Of The Engineer Incharge, """provide Firstaid Boxes Supply And Fixing Of Firstaid Boxes As Per Ie Rules, 1956 Clause 43(2), Including Necessary Clamps, Bolts, Rawl Plugs, Etc. Breachki Ng And Making Good The Walls If Required. All Complete With Labour And Materials As Per The Direction Of Engineerincharg", Fire Fighting And Safety, "taking Delivery And Refilling The Extinguishers Of Various Sizes Capabilities Including Supply Of Dry Chemical Powder, Co2 Gas Etcu Pdating The Data & Identification Tags, Recording The Status Ofchecking In History Register Etc As Per Isi Standard And Replacing Thesame As Directed By Engineerincharge (the Rates Are Inclusive Of Alltaxers). (the Co2 Cylinder May To Be T Aken Out And Delivered Back Within10 Days After Refilling Repairing. However Fire Extinguishers Co2 Areto Be Supplied Kept Temporary In Place Of Each Fire Extinguisher Forwhich Taking Out For Refilling Repairing Is Required).", Dry Chemical Powder, 0.2 Kg Dcp Cartridge, 2 Kg Co2 Cylinder, 3.2 Kg Co2 Cylinder, 4.5 Kg Co2 Cylinder, 6.8 Kg Co2 Cylinder, 10 Kg Dcp Cylinder, 75 Kg Dcp Cylinder, Supply And Replacing The Spares Assembles Etc Of The Fire Fighting Equipments System For All Sizes Capacities As Per Isi Standard An D Approved Make With All Labours, Materials, Carriages, Inclusive Of Alltaxes Etc. Complete, Rubber Washer For Extinguisher, Co2 Safety Valves 155kgfcm2, Co2 Safety Pins, Isi Marked Discharge Pipe With Horn For 6.5 Kg And 6.8kg Co2exitinguishers., Rubber Gasket Of Dcp Main Cap, Dcp Main Cap (gun Metal) Cp, Dcp Plunger Pin With Spring, Dcp Plunger Top, Squeezing Grip (plastic) Nozzle, Dcp Cylinder Discharge Pipe Of Sufficient Length For 10 Kg Capacity Fire Extinguisher, Dcp Cylinder Discharge Pipe Of Sufficient Length For 75 Kg Capacity Fire Extinguisher, Hydrostatic Testing, And Inspection Of High Pressure Co2 Extinguishers Through Peso Approved Party And Charging Upto Required Pres Sure(refilling) Including Taking Delivery Of The Cylinder From The Station And Returning The Same To Station Inclusive Of All Labo Ur Material, Transportation And All The Other Incidental Expenses). The Cylinder Is To Be Returned Back To The Station Within 15 Day S From The Date Of Receiving From The Station. (for 2kg 4.5 Kg 6.8 45 Kg Co2 Cyl. And Dcp Cartridges), "supply And Painting With Two Coats Synthetic Enamel Paint (asianburger) Fire Paint Including Scrapping, Cleaning, Applying Onecoat Of Red Oxide Primer Cost Of All Labours, Materials, Carriage,taxes, Letternumber Writing, Identification Marks Etc. Complete In Allr Espect.", Spraybrush Painting Of Fire Bucket Stand With Its Bucket (46 Bucket)including Letternumber Writing., Spray Painiting Of Fire Extinguishers Of All Sizes Includingletternumber Writing., Fire Siren Including Letter Number Writing., Air Filling In Cylinders Of Breathing Apparatus Inclusive Of All Taxes With Transportation, Hydraulic Testing Of Co2 Cylinders Inclusive Of All Taxes ( 2 To 4.5kgcm2), Hydraulic Testing Of Co2 Cylinders Inclusive Of All Taxes ( 6.8kgcm2), Hydraulic Testing Of Dcp Cylinders Of All Sizes Inclusive Of All Taxes, Hydraulic Testing Of Breathing Appratus Set, Supply And Fixing Of Wind Socks On The Position Including All Labour,tools And Tackels As Per Direction Of Engineerincharge Inclusiv E Of All Taxes., Civil Arc Works, Painting Works, Scrapping Of Moss,blister Etc.thoroughly From Surface Of Walls With Scrapper Wire Brush Complete In All Respects As Per Specificatio Ns And Directions Of Engineerincharge Site Engineer., Removing Loose Scales,blisters Etc From Old Painted Steel Or Wooden Surface By Scrapping With Wire Brush Thoroughly And Smoothening The Surface To Make It Suit Able For Receiving Fresh Coat Of Paint Complete With All Labour And Materials As Per Specifications, Painting Any Shade As Directed With Best Quality Synthetic Enamel Aluminium Paints Of Asian, Berger Or Other Equivalent Approved Mak E And Brand On Steeltimberplasticmetal Including Smoothening The Surface By Sand Papering Etc Complete With All Labour And Materials Complete In All Respects As Directed, (a) Two Coats Including Priming Coat, Earth Work, Surface Dressing And Grading Of The Ground Including Removing Vegetation And Leveling The Undulations Up To The Depth Of 15 Cms (cut Ting Andfilling Up To 15cm), Removing The Pebbles, Stones, Brick Bats, Woodenbattenslogs And Tree Leaves And Including Disposal At N O Extra Costoutside The Iocl Premises., Horticulture Works, Maintenance Of Lawn Grass Including Watering At Least Thrice In A Month,cutting, Trimming, Removing Grass, Vegetation Including Labo Ur And All Materials, Tools And Tackles Etc. Complete As Directed By Engineer In Charge., Sanitary & Toilet Fittings Works, Repairing The Old Urinal Including Removing The Old One And Making Good Same Including All Labour And Materials Complete., Repairing The Bibcock, Stop Cock, Pillar Cocks,flush Cocks,push Cock,ball Cock Etc By Replacing Necessary Washer Valve Seat Gland Pa Cking Andany Other Working Part Etc As Required Complete., Cleaning The Tiles, Lavatory Flooring, Urinals By Using Any Of The Following Materials With Required Proportion Including All Labour And Materials Complete., Vim Powder Cleaning Powder, Isi Grade Black Phynyle White, Acid Nepthas Ball, Coir Brusheswire Brushes, Finit, Washing And Cleaning Complete Toilet Block And Maintaining The Same In Good Hygienic Condition By Supplying And Providing Air Freshe Ners Such As Odonil Napthaline Balls, Phenole, Vim Powder Etc. Using Good Approved Quality Of Washing Materials Including Cleaning O F All Accessories And Phenol Within The Bathroom.the Rate Is On Per Day Basis., Having Two Three Urinals, One Two Wc, Two Three Wash Basins,including Floor And Floor Traps Etc., Having Onetwo Urinals, One Wc, One Two Wash Basins, Including Floor And Floor Traps Etc., Mopping Of Floors Of Offices ,toilets, Control Rooms, Electrical Substations Etc. With Soap Solution Or Ordinary Water With Wet Clot Hafter Sweeping The Floor With Phooll Broom Removing Cobwebs With All Tools ,tackles, Labour & Materials Etc. Complete As Per Direct Ions Ofengineer Incharge., Cleaning Of Overhead Water Tanks By Removing Sludge, Moss By Scrapping & Disposing Them Out At The Dumping Place Within The Lead Of 500 M.tank To Be Bleached With Chlorinated Water Bleaching Powder In Proportion To Disinfect Properly With All Labour,material Comp Lete And As Per Direction.(litre= Per Lit Of Tank Capacity), Repairing Damaged Plastered Wall Or Flooring By Rendering Necessary Patch Work Including Removing The Existing Damaged Plaster Or Ip S,raking Out The Joints Of Brick Work, Cleaning The Surface And Filling The Depressions With Reinforcement Mortar & Neat Cement Punn Ing,levelling The Surface Curing Etc. Complete With All Labour, Materials &scaffolding Etc.including Removing The Debris As Directed ., Repairing And Servicing The Existing Aluminium Door Or Window By Realigning The Door, Repairing, Servicing, Oiling, Greasing Etc Com Plete And Making It In Perfect Working Condition With All Labour And Materialsetc, Complete Up To Any Size., Providing & Painting With Acrylic Distemper Of Make Asian,berger Or Nerolac Or Equivalent Two Coats For The Old Surfaces After Scra Pping And Cleaning The Existing Surface And Applying A Coat Of Primer And One Coat Of Putty Where Required Etc. Including Necessary Scraping ,scaffolding Etc. Complete., Surface Preparation ,supplying And Painting Two Or More Coats Of Weather Proof Acrylic Smooth Exterior Emulsion Paint Of Make Asian( Apex) , Berger Or Nerolac Or Equivalent On Exterior Walls Over One Coat Of Cement Primer And Wall Putty Where Required As Per Speci Fications And Of Approved Color And Make Including All Scraping ,removing Unwanted Material And Scaffolding All Complete., Painting Lines,dashes,arrows,letters Etc. On Roads,field And Like Up To 10 Cm In Width In Two Coats With Road Marking Paint,brushing Including Cleaning The Surface Of All Dirt,dust And Other Foreign Matter., Letter Writing With Synthetic Enamel Paint Of Approved Brandand Manufacture Note : Unit Of Measurement Is Considered Each Which Is E Qual To Per Cm Height Per Letter., Supplying And Spreading Insecticides As Per The Direction., Roger( Litre= 100ml), Malathon( Litre= 100ml), Novan( Litre= 100ml), Bhc(50%), Bhc(10%), Andrex ( Litre= 100ml), "plain Concrete Works Providing & Laying Plain Cement Concrete (pcc Of Different Grades) Infoundation, Floor Or At Other Places By Using Crushed Stone Agg Regatesas Directed Where Necessary And Curing With Water Excluding Cost Ofcentering And Shuttering.", 1:1.5:3 [1 Cement : 1.5 Coarse Sand (zoneiii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived Fro M Natural Sources], 1:2:4 [1 Cement : 2 Coarse Sand (zoneiii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Na Tural Sources], Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishi Ng And Reinforcement All Work Up To Plinth Level :, 1:1.5:3 (1 Cement:2 Sand: 4 Stone Aggregate 20 Mm Nom.) In Foundation And Plinth Excluding Form Work And The Cost Of Reinforcement B Ars., 1:2:4 (1 Cement:2 Sand: 4 Stone Aggregate 20 Mm Nom.) In Foundation And Plinth Excluding Form Work And The Cost Reinforcement Bars., Reinforced Cement Concrete: Cement Concrete Tmt Bars (fe500d Grade Or More) Thermomechanically Treated Bars Of Grade Fe500 D Or More, Brick Work With Common Burnt Clay F.p.s. (non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In :, In 1:4 Cement Sand Mortar (1 Cement : 4 Medium Coarse Sand ), Brick Work With Common Burnt Clay F.p.s. (nonmodular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Flo Or V Level In All Shapes And Sizes In :, In 1:4 Cement Sand Mortar (1 Cement : 4 Medium Coarse Sand ), Flooring, Brick On Edge Flooring With Bricks Of Class Designation 7.5 On A Bed Of 12 Mm Cement Mortar, Including Filling The Joints With Same Mortar, With Common Burnt Clay Non Modular Bricks :1:4 (1 Cement : 4 Coarse Sand), "finishing Providing 15 Mm Thick Cement Plaster On Walls Or Floor In Cement Mortar Including Raking Out The Joints Over The Brick Work, Stone M Asonry Orconcrete Surface In One Or More Coat As Directed,curing, Scaffolding,finishing Smooth With Cement Punning Etc All Complete", C.m. 1:4 ( 1 Cement : 4 Sand), "pipe Support & Structures Supply, Fabrication And Erection Of All Types Of Pipe Supports Of Ms Material Like Clamps, Saddle, Guide Stops, Cradles, Turn Buckle S, Anchors, Tposts; Stockade Trestle And Pipe Bridge For Overhead Piping; Frames For Canopy, Approach Ladders And Platforms, Cross Over, Cable Tray Supports Etc. Including Painting Suitable For Highly Corrosive Area As Per Specification Labor And Supervision & Co Mplete Work As Per Specifications And Instruction Of Engineer In Charge (bolts, Nuts, Washers, Pvc Coated U Clamps Etc. For Support Ing Shall Be Supplied By The Contractor Within The Rates Quoted. These Items Will Not Be Measured And Paid Separately) This Work Is To Be Complete In All Respect As Per Scope Of Work.", Surface Excavation Earth Work In Surface Excavation (not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan) In All Kinds Of Soil Including Getting Out And Disposal Of Excavated Earth Up To All Lead And Lift, As Directed By The Enginee Rincharge., Earth Work In Excavation By Mechanical Means (hydraulic Excavator) Manual Means Over Areas (exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth, All Works Up To Any Lead And Lift, As Directed By The Engineerincharge : In All Kinds Of Soilin All Kinds Of Soil, Excavating Trenches Of Required Width In All Kinds Of Soil For Pipes, Cables, Etc. Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Upto Specified Depth, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Su Rplus Excavated Soil, All Work Up To Any Lead & Lift As Directed By The Engineerincharge: Trench Depth Upto 1.5m: Trench Depth Upto 1.5m :pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia, Filling Local Earth Excavating, Supplying And Filling Of Local Earth (including Royalty) By Mechanical Transport Up To All Leads, Al So Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete., Supplying And Filling In Plinth With Sand In Trenches Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete ., Centering & Shuttering: Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Formwork For :, Foundations, Footings, Bases For Columnsfoundations, Footings, Bases For Columns, Retaining Walls, Return Walls, Walls (any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses Fillets, Ke Rbs And Steps Etc., Columns, Piers, Abutments, Etc.columns, Piers, Abutments, Pillars, Posts And Struts, Supplying, Fabricating And Fixing M.s. Structural Steel Work Made Of Joists, Tubes, Pipes, Channels, Angles, Plates, Flats, Bars Etc ., For Struts, Chain Link Fencing Posts As Per Drawing Including Gate, Ladders, Safety Grills, Walkways, Collapsible Gate, Signboard S, Supports For Cable Trench, Making Slots For Barbed Line, Wire Hoisting, Placing In Position, Embedding In Concrete, Applying Two Coats Of Epoxy Paint "epilux 155" High Build Enamel Over A Coat Of Epilux 610 Primer Of Ms Berger Or Any Other Approved Equivalent M Ake As Per Manufacturer S Recommendation, Complete In All Respect Including Cutting To Required Size Welding Of Joints, Fixing Ancho R Plates,bolts, Theading, Nuts, Washers, Sleeves Etc. And Necessary Lettering Of Approved Pattern On Main Gate, Signboards Etc.compl Ete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawings, Specifications And Directions O F The Engineerincharge. (excluding The Cost Of Concrete Work)., G.i. Barbed Wire Fencing With Angle Iron Post Placed At Required Distance Embedded In Cement Concrete Blocks, Every 15th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With Horizontal Lines An D Two Diagonals Interwoven With Horizontal Wires, Of Barbed Wire Weighing 9.38 Kg100 M (minimum), Between The Two Posts Fitted And F Ixed With G.i. Staples, Turn Buckles Etc. Complete. [notes: (1) Cost Of Posts, Struts, Earth Work And Concrete Work To Be Paid For S Eparately. (2) Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used]., Providing And Fixing G.i. Chain Link Fabric Fencing Of Required Width In Mesh Size 50x50 Mm Including Strengthening With 2 Mm Dia Wi Re Or Nuts, Bolts And Washers As Required Complete As Per The Directions Of The Engineerincharge :, Pvc Coated Gi Wire (4mm Dia.)made Of G.i. Wire Of Dia. 4 Mm, Pvc Coated To Achieve Outer Dia Not Less Than 5 Mm In Required Colour A Nd Shade., Providing And Fixing G.i. Chain Link Fabric Fencing Of Required Width In Mesh Size 25x25 Mm Made Of G.i. Wire Of Dia 3 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Directions Of The Engineerincharge., Supplying, Fitting And Fixing Punched Tape Concertina Spiral Coil Of 50 Turns Per Coil Having Core Wire Of 2.6 Mm Diameter Made Of H Igh Carbon Spring Steel Of High Tensile Strength As Per Is:4454 (parti, Gradeii) Having Minimum Galvanising Coating Thickness Equiva Lent To 230 Grams Per Square Metre And Low Carbon Steel Strip Of 0.5 Mm Thickness Having A Series Of Barbes Punched All Along The Le Ngth On Both Sides Of The Strip At Regular Interval As Per Is:513, Dd Quality Having Minimum Galvanising Coating Thickness Of 12 Mic Rons. Hardness Of Tape Should Be Between 137180 Vpn (victor Penetration Number). The Coil Should Be Clipped Sufficiently At Regular Intervals. The Coil Should Not Be Stretched For More Than 6.0 M Length And The Minimum Diameter Of The Coil In The Closed Condition Should Not Be Less Than 600 Mm Complete In All Respects Inclusive Of Cost Of All Labour, Materials, Tools, Tackles Etc. As Per Drawi Ngs, Specifications And Directions Of The Engine