“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Providing Weathering Course On, Nagapattinam - Tender Details
Explore tender information for Providing Weathering Course On in Nagapattinam, including eligibility, deadlines, and bid specifics.
DEPARTMENT OF SPORTS
Nagapattinam, Tamil Nadu, India
NTID 39283178
Opening Date : Fri 28th February, 2025- Closing Date : Thu 27th February, 2025
- ₹ 0.00
- NTID 39283178
Providing Weathering Course On The Roof Top Passenger Terminal Station At Nagapattinam
Key Values: Document Cost: 0.00 | EMD: 33950.00 | Estimated Cost: 0.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
33950.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
BOQ Items Total Items : 7 | Total Qty : 5967
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Dismantling Pressed tiles, weathering Course and removing debris from the the site as instructed by the Board Engineers etc., complete. | 1800.00 | M2 |
| 2 | Dismantling and Re-locating of an existing PVC water tank, with a capacity of 2000 liters (3nos) and demolition of the Brick Work supports on which it currently rests. The first step is to disconnect all piping from the tank, to ensure that the pipes and valves, are not damaged and to convey the same tank to a temporary location as instructed by the authorities. All debris from the demolition will be removed and the debris should be taken away from the site as per information of Board engineers etc.,complete.Once the tank has been safely relocated, the temporary site will be prepared by leveling the surface to ensure a stable base. The water tank is reinstalled at the temporary site, ensuring that all pipe new connections are securely provided and tested against leaks. The work is coordinated with the authorities to meet their requirements and complete the work efficiently within the specified timeframe. | 1.00 | Job |
| 3 | Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run. | 540.00 | RM |
| 4 | Providing and grouting with single component Polyurethane Foam injection grout at dripping leakage points, grout mixed at ratio of 10:1 (10 parts of Resin: 1 part accelerator) at the rate of 0.40kg/nozzle which will foam after reaction with water/moisture, cream time <20 seconds, rise time <30 seconds, foam expansion more than 30 times. It has a mixed viscosity of <350 cP as per ASTM D 2196. Allow the PU foam grout to cure for 5 -10 mins. Providing and grouting with two component Polyurethane based resin injection grout mixed at ratio of 2:1 (2 parts of Base: 1 part Hardener) which will injected through same nozzle at the rate of 0.30kg/nozzel which gives Adhesion strength >2.5 MPa, Adhesion in wet concrete >1.5MPa, Elongation >80%. It has a mixed viscosity of <350 cP as per ASTM D 2196. The finished cost to include surface preparation, fixing of non-return valve injection packers at dripping leakage locations and damp patch locations, seal the nozzles with polyester resin anchor grout Instant leak plug 0.2kg/nozzle. All the application procedure shall be as per the direction of the Engineer In charge.,etc,complete. | 25.00 | Nozzle |
| 5 | Providing Polymer Coating (Water Proof Coating) for Terrace (Above the roof slab) and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. | 1800.00 | M2 |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054