“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Providing Road Furniture From , Villupuram - Tender Details
Explore tender information for Providing Road Furniture From in Villupuram, including eligibility, deadlines, and bid specifics.
Highways Department
Villupuram, Tamil Nadu, India
NTID 38918156
Opening Date : Tue 28th January, 2025- Closing Date : Mon 27th January, 2025
- ₹ 9890000.00
- NTID 38918156
Providing Road Furniture From Km 4/0-6/8 Of Road Branching From Km 6/8 Of Vridhachalam-tholudur Road To Madhanathur-via- Jayankondam-vpm-106
Key Values: Document Cost: 0.00 | EMD: 60000.00 | Estimated Cost: 9890000.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
60000.00 -
Document Cost
Refer Documents -
Estimated Cost
9890000.00
BOQ Items Total Items : 26 | Total Qty : 7065.19
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and laying of Hot applied Thermoplastic compound 2.5mm thick including reflectoring glass beds @ 250 grms per Sqm. area thickness of 2.50mm is exclusive of surface applied glass beds as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc., complete (as per MORTH specification No. 803) | 2656.55 | square metre |
| 2 | Providing and fixing reflective road studs of category A Raised pavement markers made out of poly carbonate/methyl methecrylate/ABS moulded body conforming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORT&H circular No RW / NH. 33023/10/ 97-DO.III dt 11.06.97 the height, width and length shall not be less than 15 mm, 90mm and 100 mm and with minimum reflective area of 13 sq.cm. on each side and the slope to the base shall be 35+/-5 degree. Each reflector shall have a CIL not less than values specified in table 2 of said MoRT&H circular.The strength of detachment of the integrated cylinderical shanks,(of diameter not less than 19 +/- 2mm and height not less than 30 +/- 2mm ) from the body is to be a minimum value of 500kgf.Fixing will be by drilling holes on the road for the shanks to go inside,without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The marker shall support a load of 13635kg tested in accordance with ASTM D4280 and confirming to IRC 35 -2015 guide lines and MoRT&H Specification 804 etc., complete. | 3365.00 | Nos |
| 3 | Providing and erecting of retro-reflectorised Cautionary, Mandatory and Informatory signs (with definition board) made out of High Intensity Prismatic grade sheeting confirming toType IV standards of IRC: 67-2012 and ASTMD 4956-09,specification and fixed over 2.00mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle post 75mm x 75mm x 6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm size including cost and conveyance of all materials,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by the engineer in charge.High Intensity retro reflectro sheet shall consist of minimum coefficient of Retro reflection as per Table 6.6 of IRC 67-2012.The retro refective sheeting shall be covered under seven year warrenty issued for field perfomance and a certified copy of three years out door exposer report shall be obtained as per IRC 67-2012 (as per MoRT&H Specification No:801) | ||
| 4 | (60 cm Circular board) | 4.00 | Nos |
| 5 | (90 cm Equilateral triangle) | 50.00 | Nos |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054