Facebook
Description

Providing, Fabricating And Fixing 1.2 Mm Thick 316 Grade Stainless Steel Cladding With Framework For Multi-purpose Room At Third Floor, Jsw School Of Public Policy, New Campus, Iim Ahmedabad.

Tendering Authority: INDIAN INSTITUTE OF MANAGEMENT

India, Gujarat, Ahmedabad

NTID

29363583

Last Date For Submission

17 Oct, 2022

Closing Date

17 Oct, 2022

BOQ Items Total Items : 11 | Total Qty : 161
# Item Quantity Units
1 SS CLADDING WORK
2 Providing , fabricating and fixing 1.2 mm thick Stainless steel of SS 316 grade cladding in brushed finish as directed with necessary approved MAKE M.S. framework with primer and paint as per requirement and 12 mm flexible BWP waterproof Ply of IS:710 grade (GreenPly, Century, Archidply/Equivalent) backing with approved quality adhesive, with necessary SS (316 grade) fittings and fixtures and two coat of black Japan Paint on both side, fixed in proper plumb and level. M.S. structure to be implemented as per drawing, including fixing Rockwool of approved make insulation in cavity, cleaning, and framework length and size as detailed and approved by the Architect/ Project manager. All edges to have rounded bend, radius to be as specified in drawing/mockup. All joints and junctions with existing SS to be properly welded to prevent ingress of water.Providing, fabricating and fixing of 48x96x5mm thk MS box section at c/c distance of 500mm and 50x50x5mm MS angle as horizontal bracing along curved profile and 5 mm thick MS plate between masonry wall and MS framework required as per architectual intent drawings. Prior to start of work, Contractor shall submit detailed full scale shop drawings including plan, section and elevation and detail of fixing for approval by the Architect. Samples of each item as directed by the architect shall be submitted for approval. Work shall proceed only on approval of shop drawings. Cost shall include appropriate sealer to resist stain and water absorption in ply backing, labour, SS buffing inclusive of all leads, lifts, scafolding, Anchore, 12mm dia x100mm anchor fastner,Welding, cleaning, polishing, etc., complete as per the drawing, instructions and to the satisfaction of the PM. (Measurement and payment shall be made on the actual finished surface area) (Location : Multipurpose Classroom Curved Wall and West Facade) 15.000 Sq Mt
3 Providing , fabricating and fixing 1.2 mm thick Stainless steel of SS 316 grade cladding in brushed finish on existing curved shape masonary wall with approved MAKE 12 mm flexible BWP waterproof Ply of IS:710 grade (GreenPly, Century, Archidply/Equivalent) backing with approved quality adhesive, with necessary SS (316 grade) fittings and fixtures and two coats of black Japan Paint on both side, fixed in proper plumb and level. SS and plywood cladding to be implemented as per drawing as detailed and approved by the Architect/ Project manager. All edges to have rounded bend, radius to be as specified in drawing/mockup. All joints and junctions to be properly fixed to prevent ingress of water. Prior to start of work, Contractor shall submit detailed full scale shop drawings including plan, section and elevation and detail of fixing for approval by the Architect. Samples of each item as directed by the architect shall be submitted for approval. Work shall proceed only on approval of shop drawings. Cost shall include appropriate sealer to resist stain and water absorption in ply backing, labour, SS buffing inclusive of all leads,lifts, scaffolding, Anchor, 12mm dia x100mm anchor fastner, welding, cleaning,polishing, etc., complete as per the drawing, instructions and to the satisfaction of the PM. (Measurement and payment shall be made on the actual finished surface area) (Location : Multipurpose Classroom Curved Wall and West Facade 60.000 Sq Mt
4 SS FRAME WORK
5 Providing, fabricating and fixing in position 50 x 50 mm Stainless Steel (316 grade) hollow box section frame on all four sides for aluminium window as detailed and approved in shop drawing (based on concept architectural drawings); welded to existing SS box window on three sides, and M.S box section framework/RCC wall on one side. Fittings and fixtures shall be of Stainless steel (304/316 grade), factory-made mechanical junctions with concealed fixing. All items shall be strengthened and lapped as required. Prior to start of work contractor shall submit detailed full scale shop drawings including plan, elevation and detail of fixing with structure for approval of the Architect/ Project manager. Samples of each item on full scale or smaller scale as directed by the Architect/ Project manager shall be submitted for approval. Work shall proceed only on approval of shop drawing. (Measurement and payment shall be made on the actual finished area on the elevation) (Location : Multipurpose Classroom West Window) 20.000 RMt
Tender InquiryInquiry