“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Providing Fabricating And Ere, Shirdi - Tender Details
Explore tender information for Providing Fabricating And Ere in Shirdi, including eligibility, deadlines, and bid specifics.
Shri Saibaba Sansthan
Shirdi, Maharashtra, India
NTID 38807730
Opening Date : Mon 20th January, 2025- Closing Date : Fri 17th January, 2025
- ₹ 0.00
- NTID 38807730
Providing, Fabricating And Erecting Shed For Dg Set, Transformer And Metering Cubical At Sai Ashram Bhaktaniwas.
Key Values: Document Cost: 590.00 | EMD: 9500.00 | Estimated Cost: 0.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
9500.00 -
Document Cost
590.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 6 | Total Qty : 253.176
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means. SSR Page No.189, Item No.21.01, Spec. No. Bd. A.1, Page No.259. | 9.113 | Cum |
| 2 | Carting away unwanted excavated material from site to outside the premises upto 2 km lead including loading and unloading. | 9.113 | Cum |
| 3 | Providing and laying Cast in situ/ Ready Mix cement concrete in M20 of trap/ granite/ quartzite/ gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR Page No.24.06, Spec No.Bd.E.2 P.No. 288 and B.7 Page No.38. | 9.113 | Cum |
| 4 | Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge. SSR Page No.213, Item No.23.07. Spec. No. Bd.18, Page No.78. | 3.167 | MT |
| 5 | Colour Coated Sheets - Providing and fixing of colour coated Zinc aluminium (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capacity groove and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ Sqm) 900 mm girth (Surface Width). SSR - 2023-24, Item No.38.34. | 150.67 | Sqm |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054