Facebook
Description

Procurement Of Wet System Spares - Ba Hopper Feed Gate Assembly , Gate Face Liner For Bahfg Ahp U#3 Gate Face For Bottom Ash Hopper Feed Gate Assembly, Part No.:5&6, Qty:1set (1set=1 No Of Gate Wear Liner Moc: Ss-316 And Face Plate With Ms Back Up Plate Part No.6), Drawing No: Btps-eeahp2-ba-fg-01, Make: Dcips/umhs/br Enterprises / Equivalent. , Ash Sluice Gate For Bahfg Ahp U#3 Ash Sluice Gate Of 36"x36" For Bottom Ash Hopper Feed Gate Assembly , Part No.:9, Material: Ci, Fg-260, Is:210, Drawing No: Btps-eeahp2-ba-fg-01, Make: Dcips/umhs/br Enterprises / Equivalent. , Sp Ring For Ba Hopper Fg Ahp U#3 Sp Ring For Ba Hopper Feed Gate U#3, Drawing No: Btps-eeahp2-bah-01, Make: Dcips/umhs/br Enterprises / Equivalent. , Inspection Window Glass For Ba , Inspection Window Glass (100mm Dia) , Assy.of Ash Crusher (clinker Grinder) U-3 Assy.of Ash Crusher (clinker Grinder), Type: Single Roll Reversible, Speed: 17 Rpm(approximate), Max.output Of Clinker : 25mm, Speed Reduction Through Gearbox = 20:1, Speed Reduction Through Chain & Sprocket =2.8 :1 (approximate), Capacity: 105 Ton/hr, Moc: As Per Drawing No: Btps-eeahp2-cg-01 , Shaft Sleeve Aca , Lantern Ring Aca , Gland Aca , Feeder Ejector Assembly Feeder Ejector Complete Assembly For Aph/eco Hoppers U#3, Dry Ash Capacity : 4.25 Ton/hr, Water Quantity And Pressure-160 Cu.m/hr And 7 Kg/cm2, Testing As Per Approved Qap, Slurry Concentration : 21.37 %, Mco: Inlet Elbow-durite Bhn-450, Cover Plate: M.s.is:2062, Water Chamber:c.i-fg 260, Bhn:180, Water Chamber Liner: Durite Bhn-450, Nozzle:ss 410, Nozzle Insert: Ceramic Hardness 8 Moh, Tailpiece:durite Bhn-450, Hand Hole Cover For Tail Piece: Durite Bhn 350, With Required Necessary Fastners, Note: Agency Has Supplied As Per Dcips Drawing No: 11p01-1b-t-443. Make: Globus/umhs/dcips/equivalent. , Jet Pulsion Pump Complete Assembly Jet Pulsion Pump Complete Assembly For Ahp U#3, Tech Specification, Capacity:85tph, Moc, 1) Throat Cum Discharge Pipe- 24% Chromium Ci (harness Min 550bhn) Part No: 1. 2) Nozzle Tip: Ceramic Lined Ss/ Tungsten Carbide With Hardness Of Min 500bhn, 3)nozzle Inlet: F.g 260,is:210, 4) Gasket: Rubber Asbestos, 5) Body: 24% Chromium Ci (harness Min 550bhn) Part No:9. 6) Aliging Ring: Steel , 7) Nozzle Inert: Ceramic Hardness 8moh, 8) Flange Clamp Half: Steel, 8) Counter Flange: Ms As Per Is:2062, Note: Test Pressure Of Nozzle Inlet-15kg/cm2 And Throat Cum Discharge Pipe- 8kg/cm2, Drawing No: Btps-eeahp2-jp-01, Make: Dcips/umhs/br Enterprises/equivalent. , Inlet Elbow For Feeder Ejector , Tail Piece For Feeder Ejector , Jet Pump Tail Pipe Jpp , 200x600mm Wear Piece

Tendering Authority: Karnataka Power Corporation Limited

India, Karnataka, Multi city

NTID

28768561

Last Date For Submission

22 Aug, 2022

Closing Date

22 Aug, 2022

Tender InquiryInquiry