Facebook
Description

L/f Testing, Successful Commissioning Of Gi Pipes For G/main, Sub Main, D/system Of Different Nominal Bores Alongwith Pipe Fittings And Control Valves Incl. Other Allied Works And Constt. Of Civil Structures Etc. For Wss Kalihand Under Jjm

Tendering Authority: PUBLIC HEALTH ENGINEERING DEPARTMENT

India, Jammu and Kashmir, Doda

NTID

28081842

Last Date For Submission

15 Oct, 2022

Closing Date

15 Oct, 2022

BOQ Items
# Item Quantity Units
1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by Engineer incharge in all kind of soil. 5541.00 Cum
2 Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in all kind of soil. 320.26 Cum
3 Supply of stone in Horizontal on level (Nallah 225mm nominal size) 20.25 Cum
4 Dumping and filling of stone in Horizontal on level 20.25 Cum
5 Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40mm nominal size. 29.94 Cum
6 Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 0.81 Cum
7 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size) 3.16 Cum
8 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size) 30.86 Cum
9 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge..All works upto plinth level Note: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. 30.70 Cum
10 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V level Note: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. 59.24 Cum
11 Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. Note: - Minimum cement content considered is @ 340 kg/ cum. Any quantity less than 340 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix 37.65 Cum
12 Providing & Incorporating (during concreting) GP sheet strip water seal 1.25mm (nominal thick) at construction joints including jointing of ends so as to form a continous barrier, strip area (excluding laps) to be measured (width upto 20cm) 67.00 Kg.
13 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 , landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircases, & spiral stair cases upto floor five level excl. the c/o centering, shuttering, finishing & reinforcement with 1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggr. 20mm nominal size. 1.35 Cum
14 Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15 upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with M-20 graded concrete 1:1 :3 (1cement : 1 coarse sand: 3 graded stone aggregate 20mm nominal size) 11.70 Cum
15 Steel Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete upto plinth level TMT bars.Fe 500. 10697.00 Kg.
16 Centring and shuttering including strutting, propping etc.and removal of form work for foundation, footings, bares of column etc. for mass concrete. 36.75 Sqm.
17 Extra for shuttering in circular work (20% of respective centering and Shuttering items) 25.36 Sqm.
18 Centring and shuttering including strutting, propping etc.and removal of form work for walls (any thickness.) incl. attached pilasters, buttresses, plinth & string courses . 753.14 Sqm.
19 Extra for shuttering in circular work (20% of respective centering and Shuttering items) 498.15 Sqm.
20 Centring and shuttering including strutting, propping etc.and removal of form work for suspended floor landings roofs balconies and access platform. 9.48 Sqm.
21 Centring and shuttering including strutting, propping etc.and removal of form work for lintels, beams, plinth beams, girders, bress umers & canti levers. 8.53 Sqm.
22 Extra for shuttering in circular work (20% of respective centering and Shuttering items) 8.53 Sqm.
23 Centring and shuttering including strutting, propping etc.and removal of form work for arches domes, valuts upto 6.0m span. 94.44 Sqm.
24 Extra for arches, domes, vaults exceeding 6 m span 94.44 Sqm.
25 Centring and shuttering including strutting, propping etc.and removal of form work for edges of slabs and breaks in floors and walls (under 20cm wide). 40.60 RM
26 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 240.00 Kg.
27 12mm thick cement plaster with neat coat of cement in 1:3 mix (1 cement : 3 coarse sand). 594.51 Sqm.
28 Extra plastering for circular works 594.51 Sqm.
29 12mm thick cement plaster in 1:4 mix (1 cement : 4 fine sand). 345.46 Sqm.
30 Providing & mixing water proofing material 'impermo' or equivalent in cement concrete work @ 1kg/50kg of cement. 738.00 Kg.
31 Finishing walls with water proofing cement paint of approved brand & manifacture to give an even shade. New work (Two or more coats applied @ 3.84 kg/10 Sqm. 51.10 Sqm.
32 Supply & fixing of PVC Bend of 110mm dia for reservior. 20.00 Each
33 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces 3.24 Sqm.
34 supply of Main hole cover 455 x 610 mm L.D rectengular with cover. 8.00 Each
35 screening meterial for filteration gallery like, boulder 0.78 cum, bricks 50 Nos, stone aggriate 20mm 0.78 cum, 40mm aggrigate 0.78 cum, filter media 04 to 07mm 2.25 cum, all as per direction of site engineer including all carriages complete Job. 3.00 LS
36 Filling available excavated earth ( excluding rock) in trenches, plinth side of foundationetc. In layer not excedding 20cm in depth , lead upto 50mtr and lift upto 1.5mtr. 4434.00 Cum
37 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 15mm 3400.00 Mtr.
38 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 20mm 2600.00 Mtr.
39 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 25mm 3400.00 Mtr.
40 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 32mm 2000.00 Mtr.
41 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 40mm 4900.00 Mtr.
42 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 50mm 2100.00 Mtr.
43 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 65mm 6800.00 Mtr.
44 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 20 mm nominal 10.00 Nos.
45 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm nominal 15.00 Nos.
46 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 32mm nominal 10.00 Nos.
47 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal 10.00 Nos.
48 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm nominal 10.00 Nos.
49 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm nominal 6.00 Nos.
50 Making interconnection of G I distribution branch with G I Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia. 165.00 Each
51 Making interconnection of G I distribution branch with G I Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia. 33.00 Each
52 Providing & Fixing brass bib cock of approved quality 15 mm nominal bore 253.00 Each
53 Providing & fixing brass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore 253.00 Each
54 Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete 660.00 Cm
55 Carriage of G.I pipes by Mechanical Transpor from Divisional store Doda incliding loading unloading & stacking to road side of work average distance 20 Km. 82.89 MT
56 Carriage of G.I pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 02 Km. 82.89 MT
57 Carriage of Stone by Manual means including loading unloading & stacking from source (to be identified by Engineer in charge) site of work at an average distance of 01 Km. 20.53 Cum
58 Carriage of sand & stone aggriagte upto 40mm (crushed) nominal size by Mechanical Transport including loading unloading from source (to be identified by Engineer in charge) to road side of work at an av. distance of 26 Km 202.72 Cum
59 Carriage of sand & stone aggriagte upto 40mm (crushed) nominal size by Manual means including loading unloading from road side (to be identified by Engineer in charge) to site of work at an av. distance of 02 Km 202.72 Cum
60 Carriage of stone aggriagte 40mm (crushed) nominal size by Mechanical Transport including loading unloading from source (to be identified by Engineer in charge) to road side of work at an av. distance of 26 Km 30.62 Cum
61 Carriage of stone aggriagte 40mm (crushed) nominal size by Manual means including loading unloading from road side (to be identified by Engineer in charge) to site of work at an av. distance of 02 Km 30.62 Cum
62 Carriage of cement steel by Mechanical Transport including loading unloading from nearest market place (to be identified by Engineer in charge) to road side of work at an av. distance of 20 Km 73.30 MT
63 Carriage of cement by Manual means including loading unloading from road side (to be identified by Engineer in charge) to site of work at an av. distance of 02 Km 62.48 MT
64 Carriage of steel by Manual means including loading unloading from road side (to be identified by Engineer in charge) to site of work at an av. distance of 02 Km 10.81 MT
65 Providing & installation of Sign Board of size 8ft x 6ft with angle Iron frame of size 50 x 50 x 6 mm PBI sheet of 1.25mm thickness including painting and writing as directed by Engineer- In- charge. 1.00 Nos.
Tender InquiryInquiry