Facebook
Description

L/f Testing, Successful Commissioning Of Gi Pipes For G/main, Sub Main, D/system Of Different Nominal Bores Alongwith Pipe Fittings And Control Valves Incl. Other Allied Works And Constt. Of Civil Structures Etc. For Wss Ganika Malwas Under Jjm

Tendering Authority: PUBLIC HEALTH ENGINEERING DEPARTMENT

India, Jammu and Kashmir, Doda

NTID

28023688

Last Date For Submission

15 Oct, 2022

Closing Date

15 Oct, 2022

BOQ Items
# Item Quantity Units
1 Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10 Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in all kind of soil. 348.00 Cum
2 Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10 Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in odrinary rock. 157.00 Cum
3 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kind of soil. 12887.00 Cum
4 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed in odrinary rock. 5523.00 Cum
5 Supply of stone in Horizontal on level (Nallah 225mm nominal size) 7.20 Cum
6 Dumping and filling of stone in Horizontal on level. 7.20 Cum
7 Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40mm nominal size. 39.90 Cum
8 Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 20mm nominal size). 6.00 Cum
9 Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 40mm nominal size). 11.00 Cum
10 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 18.00 Cum
11 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge..All works upto plinth level Note: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix 11.00 Cum
12 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V level Note: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix 20.50 Cum
13 Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. Note: - Minimum cement content considered is @ 340 kg/ cum. Any quantity less than 340 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix. 31.50 Cum
14 Providing & Incorporating (during concreting) GP sheet strip water seal 1.25mm (nominal thick) at construction joints including jointing of ends so as to form a continous barrier, strip area (excluding laps) to be measured (width upto 20cm) . 160.00 Kg.
15 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 , landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size) 9.00 Cum
16 Reinforcement cement concrete work in Arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15 upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with M-20 graded concrete 1:1 :3 (1cement : 1 coarse sand: 3 graded stone aggregate 20mm nominal size) 7.00 Cum
17 Steel Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete upto plinth level TMT bars.Fe 500. 14730.00 Kg.
18 Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc 50 mm thick with 20mm nominal size stone aggregate. 15.00 Sqm.
19 Centring and shuttering including strutting, propping etc.and removal of form work for foundation, footings, bares of column etc. for mass concrete. 141.00 Sqm.
20 Extra for shuttering in circular work. 93.00 Sqm.
21 Centring and shuttering including strutting, propping etc.and removal of form work for walls (any thickness.) incl. attached pilasters, buttresses, plinth & string courses. 390.00 Sqm.
22 Extra for shuttering in circular work. 271.00 Sqm.
23 Centring and shuttering including strutting, propping etc.and removal of form work for suspended floor landings roofs balconies and access platform. 19.00 Sqm.
24 Centring and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, G Irders, bressumers and cantilevers. 30.00 Sqm.
25 Extra for shuttering in circular work. 30.00 Sqm.
26 Centering and shuttering including strutting, propping etc. and removal of form for:Arches, domes, vaults upto 6 m span. 67.00 Sqm.
27 Extra for arches, domes, vaults exceeding 6 m span. 67.00 Sqm.
28 Centring and shuttering including strutting, propping etc.and removal of form work for edges of slabs and breaks in floors and walls (under 20cm wide). 57.00 Rm.
29 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 180.00 Kg.
30 12mm Cement plaster finished with a floating coat of neat cement of mix: 1:3 ( 1 cement : 3 coarse sand) . 133.00 Sqm.
31 12mm Cement plaster finished with a floating coat of neat cement of mix: 1:4 ( 1 cement : 4 coarse sand) . 84.00 Sqm.
32 12mm Cement plaster of cement of mix: 1:4 ( 1 cement : 4 fine sand) . 240.00 Sqm.
33 Exra for plastering in circular work 373.00 Sqm.
34 Providing and mixing water proofing material ofapproved make in cement concrete work @ 1 kg per 50 kg of cement. 250.00 Kg.
35 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. 25.20 Sqm.
36 Supply of GI Bend 110mm dia for air exhaust for resirvior. 12.00 Each
37 supply of main hole Cover L.D. Rectangular 455x610mm with frame. 5.00 Each
38 Dry random rubble masonry with hard stone in foundation and plinth without bond stone. 700.00 Cum
39 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6mm for diagonal braces 10.80 Sqm.
40 Providing laying fitting of GI Pipe for service resirvoir for inlet/outlet (any required dia of pipes as per direction of sie engineer) including supply,labour, pipe special earthwork & carriages if reqiured all complete job. 60.00 Meter
41 Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm. 214.20 Sqm.
42 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 14728.00 Cum
43 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 15mm dia 2125.00 Meter
44 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 20mm dia 9500.00 Meter
45 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 25mm dia 9300.00 Meter
46 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 32mm dia 3850.00 Meter
47 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 40mm dia 3600.00 Meter
48 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 50mm dia 12550.00 Meter
49 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 65mm dia 13650.00 Meter
50 Laying and fitting of G.I pipe ( all classes) complete including providing & fitting of Pipe specials i.e union, elbow, bend, reducer socket, additional sockets etc as per BIS specifications excluding the cost of pipes & earth work. G.I Pipe 80mm dia 10600.00 Meter
51 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 20 mm nominal bore. 15.00 Each
52 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm nominal bore. 20.00 Each
53 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 32 mm nominal bore. 20.00 Each
54 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm nominal bore. 19.00 Each
55 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm nominal bore. 20.00 Each
56 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65mm nominal bore. 15.00 Each
57 Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 80mm nominal bore. 15.00 Each
58 Making connection of G I distribution branch with G I Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia. 100.00 Each
59 Making interconnection of G I distribution branch with G I Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia. 20.00 Each
60 Providing & Fixing brass bib cock of approved quality 15 mm nominal bore 100.00 Each
61 Providing & fixing brass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore 100.00 Each
62 Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete. 2700.00 cm
63 Carriage of GI Pipes from Departmental Store Doda by Mechanical Transport to site of work including cost for loading ,unloading & stacking for an av. distance of Average 15 km 286.90 MT
64 Carriage of GI Pipes by Manual mean from Road side (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance of Average 05 Km. 286.90 MT
65 Carriage of Cement & steel by Mechanical Transport including loading unoading & stacking from nearest market place (To be identified by engineer in charge) to road side of work at an average distance of 15 km. 47.90 MT
66 Carriage of Cement by Manual means including loading unoading & stacking from road side (To be identified by engineer in charge) to site of work at an average distance of 5.00 km. 39.80 MT
67 Carriage of Steel by Manual means including loading unoading & stacking from road side (To be identified by engineer in charge) to site of work at an average distance of 5.00 km.. 8.10 MT
68 Carriage of Sand & stone aggrigate upto 40mm nominal size (crshed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an average distance of 30 km. 140.00 Cum
69 Carriage of Sand & stone aggrigate upto 40mm nominal size (crshed) by Manual means including loading unoading & stacking from roadside (To be identified by engineer in charge) to site of work at an average distance of 5.00 km. 140.00 Cum
70 Carriage of stone aggrigate above 40mm nominal size (crshed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an average distance of 30 km. 50.50 Cum
71 Carriage of Stone aggrigate above 40mm nominal size (crshed) by Manual means including loading unoading & stacking from roadside (To be identified by engineer in charge) to site of work at an average distance of 5.00 km. 50.50 Cum
72 Carriage of Stone by Manual means including loading unloading & stacking from source (to be identified by Engineer in charge) to site of work at an average distance of 02 Km. 707.20 Cum
73 Providing & installation of Sign Board of size 8ft x 6ft with angle Iron frame of size 50 x 50 x 6 mm PBI sheet of 1.25mm thickness including painting and writing as directed by Engineer- In- charge. 2.00 Nos.
Tender InquiryInquiry