Tender for Technopark Technology Business Incubator - NTID 30654163
Technopark Technology Business Incubator
Thiruvananthapuram, Kerala, India
NTID 30654163
- Opening Date : Sat 4th February, 2023
- Closing Date : Fri 3rd February, 2023
- ₹ 2244065.00
- NTID 30654163
Interior Works Of Incubation Space At Asap Csp Building In Kasargod
Documents
Unlock the opportunities
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50000.00 -
Document Cost
2500.00 -
Estimated Cost
2244065.00
BOQ Items Total Items : 74 | Total Qty : 2259
# | Item | Quantity | Units |
---|---|---|---|
1 | Appendix 1 : Interior and furnishing | ||
2 | NDSR: Toughened Glass Partition : Providing and fixing 10 mm toughened glass (Saint Gobain)partition system as per approved drawing .Glass to be fixed using SS patch fittings( Dorma Crown/Equivalent).Use silicon sealant wherever necessary. Finish the partition as per approved design. Including cost and conveyance charges of all materials, labour charges etc., | 20 | sqm |
3 | NDSR :Toughened Glass Door Providing and fixing door of 10mm thick Toughened glass door (Saint Gobain) with dorma (Crown) patch fittings(Floor Spring, Top patch, pivot Pin, Bottom patch, Corner lock, Handle.Including all cost and conveyance of materials, labour etc complete. | 5 | sqm |
4 | NDSR : Gypsum Board Partition : Providing and fixing partition up to ceiling height (upto 360cm) consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick Moisture Resistant Board | 35 | sqm |
5 | NDSR: Modified 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 90 | kg |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane