“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Elevator Works Of Govt Arts An, Ernakulam - Tender Details
Explore tender information for Elevator Works Of Govt Arts An in Ernakulam, including eligibility, deadlines, and bid specifics.
KITCO Limited
Ernakulam, Kerala, India
NTID 39304711
Opening Date : Thu 27th February, 2025- Closing Date : Tue 25th February, 2025
- ₹ 1801000.00
- NTID 39304711
Elevator Works Of Govt Arts And Science College Mananthavady
Key Values: Document Cost: 2950.00 | EMD: 45000.00 | Estimated Cost: 1801000.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
45000.00 -
Document Cost
2950.00 -
Estimated Cost
1801000.00
BOQ Items Total Items : 7 | Total Qty : 114
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | ELEVATOR WORKS | ||
| 2 | od67924/2023_2024 : Design, fabrication, supply, installation, testing and commissioning of machine roomless electric traction type Stainless steel 13 Pax (884 Kg) Passenger elevator with suitable car size (including freight & landing charges,insurance and all applicable taxes and duties in country of origin and in India etc- except GST) and type suitable for operation on 415 V±10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1.00 Mtr/sec, electromagnetic brake system, simplex mode operation, operating panel with luminous buttons, over load warning indicator, battery operated alarmbell, LED type emergency light, intercom suitable for hook upto Purchasers' EPABX, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries, Safe landing device and Battery operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with pre-recorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE 3 or better efficiency) of machine room less elevator shall be of gearless type and placed inside the elevator hoist way complete as per technical specification. Having automatic centre/side opening stainless steel doors, Matt finish stainless steel car enclosure provided with stainless steel handrails on three sides,Granite flooring as applicable in accordance of following details:-5 stops & 5 openings and entrance & exit at same side and suitable for travel height of 15 mtrs. (Shaft Size 1950mm (width) x 2550mm (depth) ) with door opening of 900mm (width) and 2000 mm (height) .The equipment should be BMS compatible .All electrical components with wiring from the single point power supply provided in last landing near the elevator door.All components, fabrication and procedures of elevator system shall confirm to relevant IS standards/ Code and complete in all respects as per technical specifications. | 1.0000 | no |
| 3 | ELECTRICAL WORKS | ||
| 4 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) | 2.0000 | set |
| 5 | 90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp | 50.0000 | metre |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054