- Home
- >
- Tender
- >
- Uttar Pradesh Tender
- >
- Department of UP State Tourism Development Corporation Ltd.
- >
NTID 39767122
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Detailed Design Supply Install, Lucknow - Tender Details
Explore tender information for Detailed Design Supply Install in Lucknow, including eligibility, deadlines, and bid specifics.
UP State Tourism Development Corporation Ltd.
Lucknow, Uttar Pradesh, India
NTID 39767122
- Opening Date : Fri 4th April, 2025
- Closing Date : Thu 3rd April, 2025
- ₹ 0.00
- NTID 39767122
Key Values: Document Cost: 2714.00 | EMD: 603000.00 | Estimated Cost: 0.00
Tender Description
Detailed Design Supply Installation Testing Commissioning Operation And Maintenance For 5 Years For The Facade Illumination Of Statue Of Buddha Maha Mongol Shravasti Uttar Pradesh
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
603000.00 -
Document Cost
2714.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 18 | Total Qty : 2401
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply, Installation, Testing and Commissioning of exterior BIS registered LED RGBW flood lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, of Total System wattage not exceeding 200W with system lumen output > 9000 lm with all LEDs on , minimum system lumen efficacy > 43 lm/w. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 454 mm 5% including mounting hinge , diameter 340 mm 5% with constant locking hinges for simple position control from various angles without special tools.Fixture shall be suitable to operate at an ambient temperature range of -30 C to 50 C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50 C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor > 0.9. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with five year Operation and Maintenance | 12 | Nos |
| 2 | Supply of exterior rated Architectural RGBW Linear LED Wall Washer luminaire; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness with lens positioned screening to reduce the light spillage and die casted end caps, Total System wattage 40W with system lumen output should be > 2000 lm. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PMMA for each LED, offering beam angle of different types such as narrow(10 ), medium(25 ), wide(40 ,60 ) or elliptical(18 x 35 ) as per the site requirement. Fixture should have Height 50mm 5% including surface mount base width 50mm 5% , length 1000 mm 5% with constant locking hinges for simple position control from various angles without special tools. The rated voltage of the Luminaire should be 240Vac. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only, Luminaire shall be offered with integral BIS Approved Potted Driver of IP 67 rating made of extruded aluminium, Built-In Potted IP 67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection of 10kV with externally attached SPD & other safety test as per IS 15885 Part-2/ Sec 13, IEC60598-1. Fixture shall be suitable to operate at an ambient temperature range of -20 C to 50 C and complete luminaire shall be IP66 and IK07 rated. LED Lifetime shall be at least L70B50 @ 50,000 burning hours at 50 C. . The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5). with five year Operation and Maintenance | 40 | Nos |
| 3 | Supply, installation, testing & commissioning of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet .Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of kepad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0 C to 50 C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. with five year Operation and Maintenance | 1 | Nos |
| 4 | Supply, installation, testing & commissioning of DMX Signal Amplifier to boost the Signal, IP 65 rated module to enahce the depleting DMX Signals, should have IP 66/67 rates inbuilt connectors compatible with Luminaires. It should be offered with inbuilt electronic ciruit for functioning. with five year Operation and Maintenance | 4 | Nos |
| 5 | Supply of DMX address writer to write automatically address of DMX fixtures. with five year Operation and Maintenance | 1 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054