ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Design Fabrication Supply An, Bangalore - Tender Details
Explore tender information for Design Fabrication Supply An in Bangalore, including eligibility, deadlines, and bid specifics.
Bangalore Metro Rail Corporation Limited
Bangalore, Karnataka, India
NTID 39388152
Opening Date : Fri 21st March, 2025
Closing Date : Thu 20th March, 2025
- ₹ 46049501.00
- NTID 39388152
Design, Fabrication, Supply And Installation Of Signage And Graphics For Six (06) Elevated Metro Stations Of Reach-6 Under Phase-ii.
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
690750.00 -
Document Cost
11800.00 -
Estimated Cost
46049501.00
BOQ Items Total Items : 49 | Total Qty : 1032436.57
# | Item | Quantity | Units |
---|---|---|---|
1 | Section 1: Design | ||
2 | Design of Detailed sign plan, layout, Graphic and Fabrication for each station separately as per the typical drawings and as per the approval of Engineer. This includes the customization of standard signage for each station based on historical or commercial importance of site, interchange and including content design for LED Display system. The Design consultant has to have experience in Design of signage & Graphic for Metro/Airports. The rate includes the Design, Mock Up, Samples and working Models, Etc., Complete. | 6.00 | nos |
3 | Section 2: Fabrication and Installation | ||
4 | Interior Illuminated sign double sided Suspended, Projected, Post mounted. Drg. No.1.1.2 a, b. Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule etc complete all as specified as under. Sign Box: The sign box 110 mm deep shall be fabricated out of 1.6 mm thick CRCA MS sheet and reinforced with spot welded inverted hat section for entire length at top and bottom and connected with couple of ties at a max spacing of 750 mm. Parts will be laser cut blanks bent and assembled with spot and CO2 welding. Joints/welds shall be minimized on account of continuous channel bent at corners facilitating maximum dimensional accuracy and repeatability. Sign box shall be provided with a ventilation fixture with Mesh from inside for ventilation confirming to IP54. Complete sign box including channel supports are to be powder coated to match GreyG1. Sign box flange receiving the sign face shall be provided with slots to receive the screws to fix the sign frame. Sign panel - Both faces: Providing and fixing sign panel on 1 side of sign box made out of 1.6 mm thick CRCA MS sheet frame fabricated to required size and shape, the frame shall be welded on 2 bottom corners making a 'L' and top part of frame fixed at site after inserting the sign face, complete frame shall be powder coated on all faces to match GreyG2. Sign face shall be made in 8 mm thick Opal white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl pasted over a translucent white vinyl and entire panel covered with a protective over laminate. The films to wrap around the edge of the acrylic to a distance of 25 mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone 2766 and Pantone 667C) and of specified make duly approved by the Engineer-in-Charge. The 'L' frame to be made out of single sheets in continuous length without any joints and fixed to sign using cross headed M4 screws the top member of frame shall be fixed using cross headed M4 screws to allow opening the frame for servicing lights. Powder coating shall be done on all internal as well as external surfaces. Illumination: Providing LED based lights having min 25 mm overlap and placed at top and bottom of sign for the entire length as per the location specified in drawing. The continuous illumination along the length shall be achieved by using a combination of 2 ft. & 4ft. LED tube light fixture of reputed make as approved by Engineer for achieving 4000 lm uniformly as required and provided with specified electronic drivers or/and equivalent make as approved by engineer-in-charge. The light fixture shall be fixed using screws and fastners on the provided stiffner channel inside the sign box. Cost to include all internal connections and external wiring for connecting to a nearest point left by the other contractor, end connectors, wire harnesses, groumets and snaps and clips for fixing the LED lights. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention, the area will be calculated on the Size of the Graphic Face. Accessories: Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.Sign fixing: Each sign shall be suspended/projected/post mounted as per the site condition and elaborated in the sign schedule. A consolidated detail is provided in the relevant item and all the fixings. | 300.00 | sqm |
5 | Interior Illuminated sign 1 side Illuminated & back printed non-illuminated. Suspended, Projected, Post mounted. Drg. No.1.1.3 a, b. Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per relevant drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in-Charge.Sign Box: The sign box 75 mm deep shall be fabricated out of 1.6 mm thick CRCA MS sheet and reinforced with spot welded inverted hat section for entire length at top and bottom and connected with couple of ties at a max spacing of 750 mm. Parts will be laser cut blanks bent and assembled with spot and CO2 welding. Joints/welds shall be minimized on account of continuous channel bent at corners facilitating maximum dimensional accuracy and repeatability. Sign box shall be provided with a ventilation fixture with Mesh from inside for ventilation confirming to IP54. Complete sign box including channel supports are to be powder coated to match GreyG1. Sign box flange receiving the sign face shall be provided with slots to receive the screws to fix the sign frame. Sign panel - Face 1 Illuminated: Providing and fixing sign panel on 1 side of sign box made out of 1.6 mm thick CRCA MS sheet frame fabricated to required size and shape, the frame shall be welded on 2 bottom corners making a 'L' and top part of frame fixed at site after inserting the sign face, complete frame shall be powder coated on all faces to match GreyG2. Sign face shall be made in 8 mm thick Opal white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl pasted over a translucent white vinyl and entire panel covered with a protective over laminate. The films to wrap around the edge of the acrylic to a distance of 25 mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone 2766 and Pantone 667C) and of specified make duly approved by the Engineer-in-Charge. The 'L' frame to be made out of single sheets in continuous length without any joints and fixed to sign using cross headed M4 screws. The top member of frame shall be fixed using cross headed M4 screws to allow opening the frame for servicing lights. Powder coating shall be done on all internal as well as external surfaces. Sign panel - Face 2 Blank Non-Illuminated Texture pattern: Providing and fixing sign panel on 1 side of sign box made out of 1.6 mm thick CRCA MS sheet frame fabricated to required size and shape, the frame shall be welded on 2 bottom corners making a 'L' and top part of frame fixed at site after inserting the sign face, complete frame shall be powder coated on all faces to match GreyG2. Sign face shall be made in 2 mm thick Aluminium sheet (as specified) having graphics pasted in Plotter cut Block out vinyl pasted over a translucent white vinyl and entire panel covered with a protective over laminate. The films to wrap around the edge of the acrylic to a distance of 25 mm on the back side. The Plotter cut block out vinyl shall match the specified colour (colour Pantone 2766 and Pantone 667C) and of specified make duly approved by the Engineer-in-Charge. The 'L' frame to be made out of single sheets in continuous length without any joints and fixed to sign using cross headed M4 screws. The top member of frame shall be fixed using cross headed M4 screws to allow opening the frame for servicing lights. Powder coating shall be done on all internal as well as external surfaces. Illumination: Providing LED based lights having min 25 mm overlap and placed at top and bottom of sign for the entire length as per the location specified in drawing. The continuous illumination along the length shall be achieved by using a combination of, 2ft. & 4ft. LED tube light fixture of reputed make as approved by Engineer for achieving 4000 lm uniformly as required and provided with specified electronic drivers or/and equivalent make as approved by engineer-in-charge. The light fixture shall be fixed using screws and fasteners on the provided stiffener channel inside the sign box. Cost to include all internal connections and external wiring for connecting to a nearest point left by the other contractor, end connectors, wire harnesses, groumets and snaps and clips for fixing the LED lights. Above description generally holds good for the following signage unless otherwise specified except due modifications with special mention the area will be calculated on the Size of the Graphic Face, only one face will be considered for measurement. Accessories: Providing and fixing all accessories such as nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. Sign fixing: Each sign shall be suspended/projected/post mounted as per the site condition and elaborated in the sign schedule. A consolidated detail is provided in the next item and all the fixings. | 15.00 | Sqm |

Purchase Access To Download Selected Documents
₹ 200
Select this Plan

For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054