- Home
- >
- Tender
- >
- Haryana Tender
- >
- Department of Military Engineer Services
- >
NTID 39823647
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Cwe af Amb amb-71 2024-25 Spec, Ambala - Tender Details
Explore tender information for Cwe af Amb amb-71 2024-25 Spec in Ambala, including eligibility, deadlines, and bid specifics.
- Opening Date : Fri 25th April, 2025
- Closing Date : Wed 23rd April, 2025
- ₹ 6248000.00
- NTID 39823647
Key Values: Document Cost: 1000.00 | EMD: 118720.00 | Estimated Cost: 6248000.00
Tender Description
Cwe/af Amb/amb-71/2024-25 Special Repair To Existing Swts And Apporach Road Of Tech And Domestic Area At Afs Ambala Under Ge (af) Ambala
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
118720.00 -
Document Cost
1000.00 -
Estimated Cost
6248000.00
BOQ Items Total Items : 26 | Total Qty : 7373.5
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Demolition of un-reinforced plain cement concrete (PCC) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including removal of debris outside the MoD land complete all as specified & directed | 40.00 | Cum |
| 2 | Excavation over areas, not exceeding 1.5mtr deep and getting out, in soft/loose type of soil complete all as specified & directed. | 885.00 | Cum |
| 3 | Rolling & consolidating formation surfaces in cutting with 8 tonne to 12 tonne power road roller complete all as specified & directed | 100.00 | Ten Sqm |
| 4 | M&L laying & compaction of 300mm thick (compacted thickness) Granular Sub Base Concrete(GSBC) in two layers each of 150 mm thick, grading as per Grade-I as specified in table 400-1 of MORTH specifications, over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag, or combination thereof as grading required. The materials are mechanically mixed, spread & leveled on the subgrade by using motor grader of adequate capacity and rolling with vibratory roller of capacity 80KN to 100KN static weight for achieving required compaction density of at least 98% of the Maximum Dry Density, consolidating to required gradient & camber complete all as specified & directed. Notes: (i) The finished surface tolerance shall be as per Table 900-1 of MoRTH specifications for Road and Bridge works. (ii) Each layer (150mm thick) of GSBC shall be executed independently from laying till compaction. (iii) The quantity in BOQ is given for 300mm thick GSBC (consolidated thickness) and the top finished surface of 300mm thick GSBC shall only be measured for payment purpose. | 100.00 | Ten Sqm |
| 5 | M&L 200mm thick (compacted thickness) Wet mix macadam (WMM) in two layers each of 100 mm thick, grading as per table 400-13 of MoRTH specifications for Road and Bridge works, manufactured in WMM plant, material comprising of clean, crushed, graded aggregates and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80KN to 100KN static weight and consolidating to required gradient & camber complete all as specified & directed. Notes: (i) The finished surface tolerance shall be as per Table 900-1 of MoRTH specifications for Road and Bridge works. (ii) Each layer (100mm thick) of WMM shall be executed independently from laying till compaction. (iii) The quantity in BOQ is given for 200mm thick WMM (consolidated thickness) and the top finished surface of 200mm thick WMM shall only be measured for payment purpose. | 100.00 | Ten Sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054