- Home
- >
- Tender
- >
- Rajasthan Tender
- >
- Department of Deputy commissioner
- >
NTID 39754207
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Contract Work For Installing O, Sagwara - Tender Details
Explore tender information for Contract Work For Installing O in Sagwara, including eligibility, deadlines, and bid specifics.
- Opening Date : Tue 1st April, 2025
- Closing Date : Sun 30th March, 2025
- ₹ 1500000.00
- NTID 39754207
Key Values: Document Cost: 500.00 | EMD: 30000.00 | Estimated Cost: 1500000.00
Tender Description
Contract Work For Installing Open Gyms And Children Swings In Various Parks In The Municipal Area
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
30000.00 -
Document Cost
500.00 -
Estimated Cost
1500000.00
BOQ Items Total Items : 18 | Total Qty : 18
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and installation of 8 in 1 combination set:- *PRODUCT DIMNSIONS: - D.I.A 4000mm *SAFE WORKOUT AREA: - D.I.A. 5000mm *Combination made from B Class G.I. pipe. The octagonal structure is made up of 100mm NB B class GI pipe. Round plate of 250mm diameter & 10mm thickness is welded at bottom of octagonal Structure. The links are made up of 25mm NB B class G.I. pipe. The handle and seat frame of seated puller is made from 32mm NB B class G.I. pipe. For the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 5mm solid bar is used. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Leg press footrest consists of 25 NB diameter hardened low carbon steel material. The nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50mm diameter. Surfing frame is of 32NB made from B Class G.I. pipe. 300mm diameter x 10mm thick plate can be used for rotating sear of seating twister with 50 NB vertical G.I. pipe. Closing caps made from high quality FRP material which is of 2mm thickness. The pints used are made up of 17mm diameter solid bar. The bearing used are of 6205 permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pre-galvanized material. A17, A24, A34 circlips are used for assembly. The footrests are made from casted Aluminum material. Having sizes 130mm x 310mm x 5mm thick. With the support of 310mm x 130mm x 3mm thick MS plate. It has Bolting provision for mounting on concrete slab. | 1.000 | Nos |
| 2 | Providing and installation of Air Walker- DIMENSIONS: - 1060mm (Length) x 810mm (Width) x 1600mm. (Height). SAFE AREA:- 2.0 Meter x 1.8 Meter Air Walker Equipment made from B class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G.I. Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The main frame pipe is of 80mm NB made from B Class G.I. Material which is bending at the radius of 250mm. The Sleeve frame is of 100 OD and M.S. Seamless Pipe with thickness 5mm. This sleeve can be easily disassembled from main frame. The bottom support of M.S. round plate of 0250mm & 10mm thick. The leg movement frame is of 32NB made from B Class G.I. pipe. This link is supported with MS flat of size 60X8mm. The handle frame is of 25NB made from B Class G.I. Pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB B class welded with M.S. round plate of 0250mm & 10mm thickness and 20mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes. Foundation cover Closing Cap is made from FRP Material with 0.7mm thickness. Closing Caps are made up of high quality reinforced Plastic material. A24 circlips are used for assembly. The bearings used are 6205zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. To build structure bushes are used which are made from M.S. made of SS 304 used on nylon cap mounted on pins to protect and pins from rain and dust. | 1.000 | Nos |
| 3 | Providing and installation make TRIPLE STANDING TWISTER DIMENSIONS: - 1150mm (Length) x 1150mm (Width) x 1580mm (Height). SAFE AREA: - 02.1Mtr. Triple Twister made from B Class G.I. Galvanized (G.I.) Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The Center Pipe is of 80NB made from B Class G.I. pipe. The bottom support welded is of M.S. round plate of 0250mm & 10mm thick. The standing frame is of 32NB made from B Class G.I. pipe. The handle frame of triple twister is of 25mm NB made from B class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB B class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. The standing plate is fitted on the frame made up of 0 80 NB GI. Pipe. M.S. Round Plate of size 0300mm x 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of 0 35 mm SAE 8620 bright material. The bearings used are of 6205zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. | 1.000 | Nos |
| 4 | Providing and installation of make LEG PRESS DOUBLE - *DIMENSIONS: -1840mm (Length) x 360mm (Width) x 1560mm. (Height). *SAFE AREA: - 2.8Mtr x 1.4Mtr. *Leg press equipment made from B Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100mm NB made from B Class G.I. pipe. *The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. *The bottom support of M.S. round plate of 0250mm & 10mm thick. *The remaining outer frame is of 32NB made from B Class G.I. pipe. *The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB B Class welded with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. *Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. *The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. *The frame of footrests made up of 25NB B Class G.I. pipe. * Closing Caps are made up of high quality Fiber reinforced Plastic material. *To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness. *The pins used are made up of 025mm SAE 8620 bright material. *The bearings used are of 6205zz permanent lubricated sealed bearing of reputed Brand (SKF/FAG). *High tensile steel with galvanized nut bolts are used for assembly. *The cerclips used for assembly are of A24mm. *The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. | 1.000 | Nos |
| 5 | Providing and installation of ARM PULLAR DOUBLE- DIMESIONS: - 1900mm (Length) x 740mm (Width) x 1920mm (Height). SAFE AERA: - 1.2Mtr x 3Mtr. Seated puller equipment made up of B Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NB made from B Class G.I. pipe. Bottom support is of M.s. round plate of 0250mm & 10mm thickness is welded. All linkages are made up of 25NB B Class G.I. pipe. The handle frame is of 32NB B Class G.I. pipe. The seat frame is of 32NB B class G.I. pipe. To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB B class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and form radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. The bearings used are of 6205zz and 6203zz permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used of assembly are of A16. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness. | 1.000 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054