“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Const Installation Testing , Bahadurgarh - Tender Details
Explore tender information for Const Installation Testing in Bahadurgarh, including eligibility, deadlines, and bid specifics.
Global Centre for Nuclear Energy Partnership
Bahadurgarh, Haryana, India
NTID 38984714
Opening Date : Fri 7th February, 2025- Closing Date : Thu 6th February, 2025
- ₹ 12500000.00
- NTID 38984714
Const., Installation, Testing And Commissioning Of 1 Kld Etp Based On Chemical Treatment Including Construction Of Shed ,concrete Trenches, Laying Of Pvdf Pipelines Inside Concrete Trenches For Effluent Streams And Installation Of Elect. Panel
Key Values: Document Cost: 500.00 | EMD: 250000.00 | Estimated Cost: 12500000.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
250000.00 -
Document Cost
500.00 -
Estimated Cost
12500000.00
BOQ Items Total Items : 21 | Total Qty : 27
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Construction, Installation, Testing and Commissioning of 1 KLD ETP based on chemical treatment including construction of shed & concrete trenches, laying of PVDF pipelines inside concrete trenches for effluent streams and installation of electrical panel at GCNEP, Bahadurgarh, Haryana as per detailed technical specifications in Section II | ||
| 2 | RAW EFFLUENT TRANSFER PUMPS : Supplying, installing, testing and commissioning of 2 Nos. (1 working + 1 standby) PP raw effluent water pumps to pump effluent from collection sump to reaction tank suitable for handling low & high pH effluent having a liquid discharge rate of minimum 1.0 m3/hrs at a head of 10 meters suitable for operation on 3 phase 415 Volt AC supply as required and pump type should be Vertical Immersible (without bearing & mechanical seal). Polypropylene Immersible Pumps shall be fully immersed in the liquid and meant for continuous operation. The extended shaft, encased in a Polypropylene tube, shall be connected to the Impeller at the other end. All the wet parts shall be made out of Polypropylene to eliminate corrosion. The overflow is allowed to pass through the annular space between the shaft and the column pipe. The auxiliary impeller provided at the top ensures the liquid does not travel towards the motor side. The excess liquid is allowed to flow back to the tank through the drain holes provided in the column Pipe. (power requirement : 0.75 kw) | 2 | NOS |
| 3 | OXIDENT DOSING PUMP : Supply, installation, testing and commissioning of 2 Nos. (1 working + 1 standby) single phase electronic metering type dosing pump set having flow rates (0-10 LPH) and PP dosing tank of 100 litres for storage of oxident dosing solution as required. Features : External control via potential-free contacts with pulse step-up and step-down to adapt to existing signal transducers of 64:1 to 1:64. Optional external control via 0/4 20 mA and potential-free contacts with pulse step-up and step-down of 32:1 to 1:32. Stroke rate adjustment in 10% increments of 10 100% corresponds to 18 180 strokes/minute. Continuous stroke length adjustment of 0 100% (recommended 30 100%). Connector for 2-stage level switch. Wide-range electrical connection: 100 230 V, 50/60 Hz. Option for retrofitting of relay module easily and securely shall be there. Low voltage design 12 24 V DC; MOC : PP (power requirement : 0.18 kw) | 2 | NOS |
| 4 | COAGULANT DOSING PUMP : Supply, installation, testing and commissioning of 2 Nos. (1 working + 1 standby) single phase Electronic metering type dosing pump set having flow rates (0-80 LPH) and PP dosing tank of 100 litres for storage of coagulant dosing solution as required. Features : External control via potential-free contacts with pulse step-up and step-down to adapt to existing signal transducers of 64:1 to 1:64. Optional external control via 0/4 20 mA and potential-free contacts with pulse step-up and step-down of 32:1 to 1:32. Stroke rate adjustment in 10% increments of 10 100% corresponds to 18 180 strokes/minute. Continuous stroke length adjustment of 0 100% (recommended 30 100%). Connector for 2-stage level switch. Wide-range electrical connection: 100 230 V, 50/60 Hz. Option for retrofitting of relay module easily and securely shall be there. Low voltage design 12 24 V DC; MOC : PP (power requirement : 0.18 kw) | 2 | NOS |
| 5 | FLOCCULANT DOSING PUMP : Supply, installation, testing and commissioning of 2 Nos. (1 working + 1 standby) single phase Electronic metering type dosing pump set having flow rates 0-4 LPH and PP dosing tank 100 litres for storage of flocculant dosing solution as required. Features : External control via potential-free contacts with pulse step-up and step-down to adapt to existing signal transducers of 64:1 to 1:64. Optional external control via 0/4 20 mA and potential-free contacts with pulse step-up and step-down of 32:1 to 1:32. Stroke rate adjustment in 10% increments of 10 100% corresponds to 18 180 strokes/minute. Continuous stroke length adjustment of 0 100% (recommended 30 100%). Connector for 2-stage level switch. Wide-range electrical connection: 100 230 V, 50/60 Hz. Option for retrofitting of relay module easily and securely shall be there. Low voltage design 12 24 V DC; MOC : PP (power requirement : 0.18 kw) | 2 | NOS |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054