Facebook
Description

Certain Sanctioned, Revenue And Minor Works At Chaf Bangalore

Tendering Authority: Military Engineer Services

India, Karnataka, Bangalore

NTID

29020665

Last Date For Submission

30 Sep, 2022

Closing Date

30 Sep, 2022

BOQ Items
# Item Quantity Units
1 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil etc complete all as specified and directed. 16.00 Cum
2 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.of hard/dense soil etc complete all as specified and directed. 9.81 Cum
3 Removing Excavated soils exceeding 1.5 Km but not exc. 5 Km and depositing etc complete all as specified and directed. 6.19 Cum
4 M&L for hardcore of gauge n. exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers n. Exc 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed. 5.60 Cum
5 M&L for moorum/red bajri filling in floors or pavings laid in layers n exc 15cm thick , spread levelled and rammed including watering etc complete all as specified and directed. 5.60 Cum
6 M&L for PCC 1:4:8 Type D2 (40mm graded stone aggregare) in foundations, filling and mass concrete etc complete all as specified and directed. 3.00 Cum
7 M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed. 0.06 Cum
8 M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed. 0.05 Cum
9 M&L for Pre cast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed. 17.20 Cum
10 M&L for Providing precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate in window or doorcills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match all as specified and as directed. 0.80 Sqm
11 M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landing, cover salabs (for man holes etc) chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and as directed. 1.20 Cum
12 Supply only integral water proofing compound . 20.16 Kg
13 Forming jambs,with cement mortar 1:6 etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, etc complete all as specified and directed. 8.00 Sqm
14 S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats etc complete all as specified and directed. 4.00 Sqm
15 Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and stacking at site etc complete all as specified and directed. 12.00 Each
16 Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and as directed. 8.50 Sqm
17 Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces. 34.80 RM
18 Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing and directed by Engr-in-Charge. 1.60 Sqm
19 S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed. 12.00 Each
20 S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed. 5.00 Each
21 S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed. 3.00 Each
22 S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy etc complete all as specified and directed. 6.00 Each
23 S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as specified and directed. 9.00 Each
24 S&F 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed etc complete all as specified and directed. 18.00 Each
25 S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed. 14.00 Each
26 S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed. 4.00 Each
27 S&F Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm between flanges, etc complete all as specified and directed. 1.00 Each
28 S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed. 2.00 Each
29 S&F Aluminium (extruded section) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg, , complete all as specified and directed. 2.00 Each
30 S&F alluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed. 0.60 Sqm
31 Supply and fix MS framed work such as grills, gratings etc with ends of bars shouldered or riveted of forged into spiles, framed guard bars, barred iron doors, ladders, framed balusters , walking way, railing, framework of watertanks and similar work conforming to FE-290, Gde-165 all as specified and directed. 42.00 Kg
32 S&F Hight strength, deformed steel TMT 6mm to 8mm mm dia, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified and directed. 110.00 Kg
33 S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed 1145.00 Kg
34 S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed. 10.00 Per Rm
35 S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed. 3.00 Kg
36 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions. Note : All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/fittings. 4.50 Kg
37 M & L for Powder coated Aluminium ventilators any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws etc inculding frosted glass 4 mm thick and fixed with wall complete all as specfied and dierected by Eng-in-Charge 1.20 Sqm
38 S & F Powder coated Aluminium Frame work for grills Deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc complete all as specified and directed. 1.20 Sqm
39 Supply and fix powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium partitions, with using aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, sliding chanel witth roller, anodized aluminium snap beading screws excluding Sheet glass of 4 mm thick and 12mm thick prelaminated Particle board etc, complete all as specified and as directed by Engineer-in-Charge. Note: Glass and prelaminated board will be measured and paid separately under respective item. 18.00 Sqm
40 Material and labour for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements) 79.00 Sqm
41 S&F armstrong 9mm PVC laminated gypsum board false celing of 600x600 mm withprelude 24x3x300mm main tee and 24x27x1200 mm cross tee and 24x25x600 cross tee and wall angle of 19x19x300mm in false ceiling etc complete all as specified and directed. 26.00 Sqm
42 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. 62.00 Sqm
43 S&F Mild steel sheet 1.25 mm thick, 150mm dia eaves gutters, galvanised class 3, half round with rounded edges etc complete all as specified and directed. 6.00 Rm
44 Supply and fixing 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations etc complete all as specified and directed. 8.00 Sqm
45 M&L for 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring etc complete all as specified and directed. 54.00 Sqm
46 M&L for 25 mm thick Cement concrete type B1 1:2:4 using 20 mm graded stone aggregate as in levelling concrete / in sub base of flooring finished even and fair to recive floor finshes,etc complete all as specified and directed. 142.00 Sqm
47 M & L Coloured Glazed ceramic tiles (450 X 300) /(300 X 200) X 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match etc complete all as specified and directed. 100.00 Sqm
48 M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed. 24.00 Sqm
49 M&L Vitrified Ceramic tiles of size 600x600mm of size and 10mm thick light shade in floors set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and directed. 48.00 Sqm
50 M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm light shed, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:6), set & jointed in neat cement slurry & pointed in white or coloured cement to match all as specified. 25.00 Sqm
51 M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm light shed laid over and including 10mm thick rendering in CM (1:4) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade all as specified. 3.00 Sqm
52 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and as directed. 153.00 Sqm
53 M&L for Precast coloured cement concrete pavement tiles (Eurocon or Duracrete or Ultra make) laid over screed bed or bedding layer of CM 20mm thick in CM 1:6 complete all as specified and directed. 45.00 Sqm
54 M & L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting etc complete all as specified and directed. 100.00 Sqm
55 M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 37.00 Sqm
56 M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. 54.00 Sqm
57 M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. 40.00 Sqm
58 M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separetely. 57.00 Sqm
59 Taking down cement plaster on brick or concrete or stone walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. 110.00 Sqm
60 M&L for preparation of newly plastered surface of wall and apply three coats of white wash complete all as specified and as directed. 7.00 Sqm
61 M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint etc complete all as specified and directed. 48.00 Sqm
62 Complete removal of existing treatement on wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty etc complete all as specified and directed. 75.00 Sqm
63 M&L for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty etc complete all as specified and directed. 30.00 Sqm
64 M&L for preparing new plastered surface of walls and applying three coats of white wash complete etc complete all as specified and directed. 40.00 Sqm
65 M&L for preparation of old decorated surfaces of ceilings and applying one coat of white washetc complete all as specified and directed. 400.00 Sqm
66 M&L for preparing new plastered surface of walls and applying two coats of plastic emulsion washable paint over one coat of chalk whiting primer over and including 3mm thick wall care putty etc complete all as specified and directed. 54.00 Sqm
67 Complete removal of existing treatement on wall and applying two coats of plastic emulsion washable paint over one coat of chalk whiting primer over and including 3mm thick wall care putty etc complete all as specified and directed. 500.00 Sqm
68 Supply and fixing only 4 mm thick Sheet/frosted glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sq. M in each pane etc complete all as specified and directed. 8.00 Sqm
69 S&F 4 mm thick frosted glass panes, fixed with necessary glazing clips, in squares n. exc 0.5 SqM in each pane, etc complete all as specified and directed. 0.60 Sqm
70 M&L for preparation of new or previously untreated wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including filler coat to bring the surface smooth etc complete all as specified and directed. 15.00 Sqm
71 Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primeretc complete all as specified and directed. 32.00 Sqm
72 M&L in 32mm dia. PVC waste pipe for WHB 60cm long with union etc complete all as specified and directed. 3.00 Each
73 S&F Mild steel water tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed. 44.00 RM
74 S&F Mild steel water tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed. 30.00 RM
75 S&F rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 500ltrs capacity hoisted and fixed in position etc complete all as specified and directed. 1.00 Each
76 S&F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specifed and directed. 4.00 Each
77 S&F CP two way bib cock with all accessories complet all specified and directed. Make :Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc. 1.00 Each
78 Supply and fixed pillar taps cast copper alloy, with capstain head, chromium plated screwed down high pressure with or with out lettered hot or cold with long screw shanks and fly nuts screwed for iron pipe 15mm bore etc complete all as specified and directed. 3.00 Each
79 Supply and fixed stop valves, cast copper alloys, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of 15 mm bore etc complete all as specified and directed. 8.00 Each
80 S&F 15 mm bore Stop valves, fancy type chromium plated with long shank and cup (concealed type), fixed,etc complete all as specified and directed. Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc. 1.00 Each
81 S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed in position etc complete all as specified and directed. 1.00 Each
82 S&F 20mm CPVC Ball valve fixed in position, etc complete all as specified and directed. 1.00 Each
83 S&F grating doom 125mm dia with waste hole of PTMT, fixed etc complete all as specified and directed. 6.00 Each
84 S&F 15mm PVC connection 45 cm long between ends with PTMT nut and washeretc complete all as specified and directed. 6.00 Each
85 S&F 15mm PVC connection 600mm long between ends with PTMT nut and washer complete etc complete all as specified and directed. 2.00 Each
86 S&F 150mm PVC (SWR) Pipes single socketed, in andy length with rubber ring joints laid in trenches or in floor etc complete all as specified and directed. 10.00 RM
87 S&F PVC (SWR) pipe 110mm bore in any length with rubber joints, laid in trenches or in floor etc complete all as specified and directed. 16.00 RM
88 S&F PVC (SWR) pipe 75mm bore in any length with rubber joints, laid in trenches or in floor etc complete all as specified and directed. 8.00 RM
89 S&F PVC (SWR) bend any radious 110mm dia including necessary scaffoling upto 5 storeyies, fixed etc complete all as specified and directed. 7.00 Each
90 S&F PVC (SWR) bend any radious 75mm dia including necessary scaffoling upto 5 storeyies, fixed etc complete all as specified and directed. 7.00 Each
91 S&F 110mm bore PVC (SWR) bends any radius with access door etc complete all as specified and directed. 1.00 Each
92 S&F 110mm pvc traps 'P' or 'S' 3.00 Each
93 S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete etc complete all as specified and directed. 1.00 Each
94 S&F 10 Ltrs capacity PVC valveless syphonic action type flushing cistern, low level with suitable size pipe, 10 ltrs capacity etc complete all as specified and directed. 4.00 Each
95 S&F Vitreous China wash down water closet pan (Pedestal Pattern) white including P and S trap ,including white plastic seat cover with mild steel CP hinging device, flush pipe complete jointing, connecting and making good the disturbed surfaces all as specified and as directed. 4.00 Each
96 S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 450 mm size including cutting for and pinning ends of brackets or erecting stand etc complete all as specified and directed. 3.00 Each
97 Wash basin vitreous china white flat back of size 550x400mm including pillar taps 15mm dia fancy type, cast copper alloy, with capstan heads, chromium plated , 32mm brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the existing old unserviceable one, etc complete all as specified and directed. 1.00 Each
98 S&F CP shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union 15 mm bore etc complete all as specified and directed. 1.00 Each
99 S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long etc complete all as specified and directed. 1.00 Each
100 S&F Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved. 4.00 Each
101 S&F 600 x 450mm mirror of selected quality glass, covered with PVC frame mounted on 6mm thick ply board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers, complete all as specified and directed. 1.00 Each
102 S&F Stainless steel soap dish of approved make, complete all as specified and as directed. 1.00 Each
103 Taking down carefully copper/aluminium point wiring (light,fan, socket or power ) complete including its connected fitting/fixtures (ie holder, bulk head fittings, ceiling roses, fan regulators, switch , switch socket combination, FTL fitting, ceiling fans etc) and making good disturbed surfaces of wall roof etc complete all as specified and directed. 37.00 Per point
104 M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC conduit of suitable size concealed , with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated bakelite sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan point controlled by one single pole 5 amps switch all as specified and as directed. 2.00 Per point
105 M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated bakelite sheet top cover for housing switches, sockets, regulators etc. complete for one light point controlled by one single pole 5 amps switch all as specified and as directed.
106 One light point controlled by one single pole 5 Amps switch 8.00 Per point
107 One switch socket out let point 5 Amps on same board with other switches 2.00 Per point
108 One switch socket out let point 5 Amps on independent board 108.00 Per point
109 M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing and capping of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 2.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated bakelite sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed. 186.00 Per point
110 Supply and fixing in repairs LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling roseetc complete all as specified and directed. 4.00 Each
111 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lampincluding connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified and directed. 1.00 Each
112 Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size with existing ceiling rose complete all as specified and directed. 15.00 Each
113 Supply and fixing Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed 35.00 Each
114 Supply and fixing switch 15A flush type universal pattern 230 v all as specified and as directed 4.00 Each
115 Supply and fixing socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed 4.00 Each
116 Supply and fix socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed. 25.00 Each
117 Supply and fixing switch socket combination outlet 5 A , 5 pin Flush type all as specified and as directed 85.00 Each
118 Supply and fixing switch socket combination outlet multipurpose 2 in 1 , 5/15 A Flush type all as specified and as directed 182.00 Each
119 Supply and fix RCCB four pole 100mA 63Amps complete all as specified and directed. 1.00 Each
120 Supply & fixing inrepars of sheet metal enclosure MCB DB double door type 230v with 8 ways SPN suitable bus bar all as specified and directed 4.00 Each
121 Supply and fix ceiling rose surface bakelite 65x25mm, two to three termimals complete all as specified and directed. 6.00 Each
122 M&L in repair for earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI strp 25x 4mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009( Part-I). 1.00 Each
123 All as per serial item No 119 here in above but using copper plate 60x60cmx3.15mm thick electrode and 20x3mm copper strip as earthing lead all as specified 2.00 Each
124 M & L in repairs earth continuity conductor copper Strip 20 x 3 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for direct/loop earthing with proper PVC/Porcelain insulator etc all as specified and directed . 12.00 RM
125 M & L sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 2.5sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length. 25.00 RM
126 M & L sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 4 sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length. 70.00 RM
127 M & L sub main wiring with four single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 10 sqmm PVC insulated multistranded copper earth continuity conductor connecting to main earth dolly and neutral complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and four run of copper conductor together taken as one length for measuring unit length. 30.00 RM
128 S & F in repairs MCB SP of 05 to 32A,'C' curve, 10KA rupturing capacity all as specified and as directed. 31.00 Each
129 S & F In repairs MCB SPN of 05 to 32A,'C' curve, 10KA rupturing capacity all as specified and as directed. 4.00 Each
130 Supply and fix Surge protection device Type 1+2 AC ,TP+N , I max 50kA(L-N) 70 kA(N-E) etc complete all as specified and directed. Make:- Havells Model DHSAANBC50320 or equivalent in Indo Asian/ Legrand/L&T 1.00 Each
131 Supply and fixing exhaust fan 300mm sweep working in AC single phase 900 RPM with louver shutter on wall with necessary fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making hole on wall and holding frame etc complete all as specified and directed.Make Havells Model Turbojet SP or equivalent in Bajaj/Orient 1.00 Each
132 Supply and fixing wall mounted fan 3 blade 450mm sweep working in AC single phase fitted on wall including necessary arrangement on wall and holding frame fitting,bolt,nutsand washer connecting up with ceiling rose with 3 core flexible cable etc all as directed. Make Havells Model Airboll Hi-Speed or equivalent in Bajaj/Orient 3.00 Each
133 M&L for shifting of Air Conditioner, Split type capacity up to 2 TR including stabilizer from existing location to new location as per user requirement and installing, toping up of gas, replacement of copper tubing connecting up, commissioning and testing complete all as specified and as directed.Note: Topping up of gas and copper tubing will be measured and paid seperately 1.00 Each Job
134 S & F Copper tube, 15 mm / 18 mm dia, superior quality suitable for refrigeration and suction lines of split ACs, drawn through pipes/ fixed to walls/ laid on floor or roof etc complete all as specified and directed. 5.00 RM
135 S & F Copper tube, 9 mm dia, superior quality suitable for refrigeration and discharge lines of split ACs, drawn trough pipes/ fixed to walls/ laid on floor or roof etc complete all as specified and directed. 5.00 RM
136 M&L for Refrigerant gas,(R 32) suitable for cooling equipments supplied and filled etc complete all as specified and directed. 1.00 Kgs
137 Taking down sheet metal enclosure MCB DB double door type 440v with 4 ways TPN complete with MCB TPN any capacity from wall and refixing the same at the corridor for incomimg and outgoing electric supply for UPS and making surface good using putty and matching wall colour etc complete all as specified and directed. 2.00 Each
138 Removing building materials(Cement concrete any description, bricks , stone slab and tiles, bricks dust or mud etc) to a distance of 30 KM beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. 3.00 Cum
139 Demolition of brick work or stone/boulders Masonry built in cement mortar or cement lime mortar including all quions, arches, pillars, ect but excluding ashlar facings dressed stone work and precast concrete articles all as specified and as directed. 2.60 Cum
140 Demolition of cement concrete (reinforcement) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as directed. 1.00 Cum
Tender InquiryInquiry