Facebook
Description

Ca No. Ge(p)af/gur-62/2022-23 Special Repair To Power House Building, Toilet And Washroom At Af Stn Palam Under Ge( P) Af Gurgaon.

Tendering Authority: Military Engineer Services

India, Haryana, Gurgaon

NTID

29028513

Last Date For Submission

01 Oct, 2022

Closing Date

01 Oct, 2022

BOQ Items
# Item Quantity Units
1 Schedule of work
2 Dismantling of floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to the stores and rubbish off the premises complete all as specified and directed. 755.00 Sqm
3 M&L for 25mm thick PCC 1:2:4 Type B0 (using 12.5mm Graded Stone Aggregate) as in sub floors etc., and roughening the Surfaces to receive floor finish, complete all as specified and as directed. 90.00 Sqm
4 M&L Non Skid Ceramic Coloured Tiles, size 300x300x7 or 400X400X7 to 8mm, Laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed. 85.00 Sqm
5 M&L for Glazed Ceramic Coloured digital Tiles of size 300X450X7mm to 8mm, set on vertical surfaces such as Skirting, Dado, etc, over and including 10mm thick screed bed in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed. 300.00 Sqm
6 Taking down Cement Plaster or old grit was from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including skefolding and all safety measures) 370.00 Sqm
7 M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling, finished even and smooth w/o using extra Cement complete all as specified and as directed by Engr-in-charge 180.00 Sqm
8 M&L for 15mm thick rendering in CM 1:6 on brick or concrete wall surfaces, including finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. 140.00 Sqm
9 M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete all as specified and as directed. 230.00 Sqm
10 Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. 14.50 Cum
11 M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-charge 13.00 Cum
12 M&L for brick work in Half Brick thick wall with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and as directed by Engr-in-charge 15.00 Sqm
13 M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, hold fast, window cills etc complete all as specified and directed by Engr-in-charge 0.50 Cum
14 Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation, laying of cable etc and getting out soft/loose soil complete all as specified and as directed . 32.00 Cum
15 Returning, filling in with excavated soil obtained from excavation in layers n exc 25cm including spreading, levelling, watering and well ramming complete all as specified and as directed. 18.00 Cum
16 Demolition/Breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC of the Pipes with Bed, complete all as specified and directed by Engineer-in-Charge. 40.00 Rm
17 M&L for reinforced cement concrete pipe 150 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge. 20.00 Rm
18 M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge. 20.00 RM
19 M&L for PCC (1:3:6) Type C2 (40mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed. 18.00 Rm
20 M&L for PCC (1:3:6) Type C2 (40mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed. 18.00 Rm
21 M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. 20.00 Sqm
22 S&F in repairs, SFRC MH Frame with cover of size 650mm dia x 70mm thick surrounded with steel strip 70x1mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing Man Hole complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. 5.00 Each
23 S&F in repairs, SFRC MH Frame with cover of size 600mm x 600mm x 70mm thick surrounded with steel strip 70x1mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing Man Hole complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. 10.00 Each
24 All as per item No 22 above but for Gulley Trap frame & cover of Size 300x300x50mm. 10.00 Each
25 Demolition of cement concrete (un-reinforced/reinforced) of any description, not exc. 150mm thickness (above or below ground Level) and removing the same from Site(s), complete all as specified and as directed. 2.00 Cum
26 M&L for 15 mm thick rendering in CM 1:4 on brick/concrete internal and external surfaces of wall and roof. and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately. 470.00 Sqm
27 Supply only liquid water proofing compound complete all as specified and directed. 21.00 Litre
28 M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and court yard, finished cement surfaces even and smooth without using extra cement in panels and providing grooves complete all as specified. 20.00 Sqm
29 S&F Galvanised Steel Water Tubing 15mm Bore (dia), Medium Grade with all Fittings, fixed on Walls, Ceiling or laid in Floors including Taking down unserviceable Steel Water Tubing / PPR pipe with Fittings and Connections, and removing to store etc., complete all as specified and as directed. 90.00 Rm
30 S&F Galvanised Steel Water Tubing 20mm Bore (dia), Medium Grade with all Fittings, fixed on Walls, Ceiling or laid in Floors including Taking down unserviceable Steel Water Tubing / PPR pipe with Fittings and Connections, and removing to store etc. complete all as specified and as directed. 60.00 Rm
31 S&F Galvanised Steel Water Tubing 25mm Bore (dia), Medium Grade with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors including Taking down unserviceable Steel Water Tubing with Fittings and Connections, and removing to store etc. complete all as specified and as directed. 50.00 RM
32 S&F of CPVC SDR 11 pipe 20mm dia fixed to concealed/wall, ceilling,laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Chase cutting, Taking down unserviceable 15mm dia Steel Water Tubing with Fittings and Connections, repairing concealed portion etc., complete all as specified and as directed. 50.00 RM
33 S&F of CPVC SDR 11 pipe 25mm dia fixed to concealed/wall, ceilling,laid in floor etc incl all fittings fixed with solvant and brass threaded fittings for fixing Taps/GI Pipe including Chase cutting, Taking down unserviceable 20mm dia Steel Water Tubing with Fittings and Connections, repairing concealed portion etc., complete all as specified and as directed. 40.00 Rm
34 S&F brass CP fency Pillar Taps 15mm Bore, Cast Copper Alloy with Capstan Heads, screwed down high pressure with or without lettered HOT or COLD with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. Make :- Cat No PSP-510 of Prima/ARG-104 of Coronet or equivalent Marc/Jaguar/Cera. 14.00 Each
35 S&F Vitreous China 600mm Size Oval Shaped Wash Hand Basin White with Granite Counter Top supported with 40mm thick Cudappah/Red Stone horizontal and vertical Stone of Suitable Size including vertical granite Strip with Moulding/Rounding on exposed edges, with 32mm dia Brass Chromium Plated Waste Fitting, UPVC Bottle trap, 32mm dia UPVC Waste Pipe, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable old Wash Hand Basin of any description and connected Items, complete all as specified and as directed. 7.00 Each
36 S&F Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. 9.00 Each
37 S&F Fancy type two way brass bib tap 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered HOT or COLD with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. make:- Cat No PSP-512 of Prima/ARG-207 of Coronet or equivalent of Marc/Jaguar/Cera. 20.00 Each
38 S&F Vitreous China Wash down Water Closet Pan Colour or White composit type including Attached Flush tank up to 6 to 10 ltr water capacity, push button flushing system and fixing Bolts with Plastic Water Closet Seat cover, recessed bottom including Mild Steel Chromium Plated Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. 5.00 Each
39 Vitreous China Squatting Pan ORISSA Pattern, size 580X440 mm White, with and including P or S Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime Concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed. 10.00 Each
40 S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, Removing to store complete all as specified and as directed. 10.00 Each
41 S & F in repair vitrous china half stall urinals white or colour with Brass CP Spreader and water connection as directed complete including fixing all accesary and screw etc. pointing around urinal and PVC waste pipe suittable for urinal pot complete all as specified and as directed. 11.00 Each
42 S&F Angle Stop Cock 15mm Bore (dia), Brass Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cat No PSP-504 of Prima/ARG-404 of Coronet or Equivalent of Cera/Johnsen/Jaguar/Marc. 32.00 Each
43 S&F Liquid Soap Dispensor with holder, fix in wall with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish/Dispensor of any description, complete as all specified and directed. Make :- Cera, Johnson, jaguar, Marc. 15.00 Each
44 S&F Brass CP Health Faucet with 1.00m long tube and holder as Approved, including Taking down un serviceable Health Faucet of any description, complete as all specified and directed. Make :- Cat No PHF-4307 of Prima/ALD-CHR-563 of Jaguar or equivalent of Cera/Johnsen/Marc. 5.00 Each
45 S&F SS Chromium Plated 20mm dia Towel Rail 600mm Long, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete as all specified and directed. Make :- Cera/Johnsen/jaugar/Marc. 15.00 Each
46 S&F stop valve CP 15mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed 5.00 Each
47 S&F stop valve CP 20mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed 11.00 Each
48 M&L for Refixing Old Wash Hand Basin any size, including replacement of old 32mm dia Brass Chromium Plated Waste Fitting, UPVC Bottle trap, 32mm bore UPVC Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed. 2.00 Each
49 S&F High pressure PVC connections pipe 600mm long suitable for 15mm size with Brass CP Check nut complete all as specified and directed by Engr-in-Charge. 37.00 Each
50 Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia and removing to store complete all as specified and directed. 70.00 Rm
51 S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls and floor complete all as specified and directed. 40.00 Rm
52 S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls and floor with cement joint as specified. 30.00 Rm
53 S&F 75mm dia CI bends with oval access door, diminishing pieces or tapers complete all as specified and directed. 10.00 Each
54 S&F 100mm dia CI bends, diminishing pieces or tapers complete all as specified and directed. 10.00 Each
55 S&F 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and directed. 10.00 Each
56 S&F 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and directed. 10.00 Each
57 M&L for replacement of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and as directed by Engr-in-Charge 25.00 Each
58 S&F 75mm dia CI slotted Vent Cowl complete all as specified and directed. 10.00 Each
59 S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 75 mm dia pipe and fixed to wall complete all as specified and as directed. 10.00 Each
60 S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 110/100 mm dia pipe and fixed to wall complete all as specified and as directed. 10.00 Each
61 S&F in repair 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and 20mm brass float valve complete all as specified and directed by Engr-in-charge . 2.00 Each
62 Taking down existing water tank of capacity 250 to 500 ltrs and refixing after necessary water proofing treatment on roof complete all as specified and as directed 2.00 Each
63 S&F 500 Litre capacity of rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug ;and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings and including dismantling of tank complete all as specified and as directed. 6.00 Each
64 S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed by Engineer in charge. 10.00 Each
65 S&F 20 mm Bore gun metalGlobe/Gate valves with iron wheel/Lever half turn fixed in GI pipe line complete all as specified and as directed by Engineer in charge. 11.00 Each
66 S&F looking mirror 600x450x6mm of selected quality glass mounted on PVC cabinet and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engr-in-Charge. 10.00 Each
67 S&F 6mm thick looking mirror 1.20mx0.750m Polished edges of selected quality glass Mirror mounted on Brass CP 20mm Stud fixed to wall with wooden plugs with CP brass screws complete all as specified and directed by Engr-in-Charge. 5.00 Each
68 S&F in repair, 6mm thick Glass shelf (22x6") with Brass CP Bracket with brass nut, complete all as specified and directed by Engr in charge. Cat part No- ES01A of make-Nixo/hilife or equivalent out of makes specified in list of makes. 15.00 Each
69 S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge. 5.00 Each
70 S&F in repairs 4mm thick pin headed type glass, ordinary quality and glazing clip, rupper biding in square n exc 0.5 sq. m in each pane complete all as specified and as directed. 4.00 Sqm
71 M&L for 25mm thick Black granite Polished (Both Side) with rounded edge, fixed to wall by cutting and pinning and making good in CM 1:3 as in Urinal Partition complete as specified and directed by Engr-in-charge 5.00 Sqm
72 S&F in repairs for Brass Hat Peg Set of Six, Solid body, 75 mm to 100 mm complete all as specified and as direceted. 15.00 Each
73 Demolition of wall and ceiling boards (Fibre, pulp, insulation etc.) or insulation board / slabs any thickness including cover fillets complete all as specified and directed. 50.00 Sqm
74 M&L for suspended false ceiling consisting of suitable GI sections of T Angle & FI as per Std engineering practices with E board classic ceiling boards 4mm thick in grid of 0.60x0.60mtr including cutting holes and making good holes for main joints, suspending with 4mm dia GI wire to roof slab, roof trusses, purlins & rafters etc and complete all as per approved and as directed 50.00 Sqm
75 Taking down door/window chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm complete all as specified and directed. 21.00 Each
76 Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm complete all as specified and as directed. 10.00 Leaf
77 M&L for 30mm thick block board flush shutter with 0.90mm thick Sun Mica/lamination on both sides and 2nd class hard wood lipping alround including mortice Lock with Round Knob fixed in position and fixed to chowkats complete all as specified and directed by Engineer-in-Charge. 20.00 Sqm
78 S&F PVC Solid moulded Architrave Door Frame of Size 50X47mm & more made out of min 5.0mm Coloured with Plastic Trim decorated PVC Sheet Reinforced with Mild Steel Square Tube as specified as per Manufacture s Instructions complete all as specified and as directed. 70.00 Rm
79 S&F Factory Made PVC Solid moulded Architrave Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed. 20.00 Sqm
80 S & F 150mm long Aluminium anodised handles, cast type complete all as specified and directed. 50.00 Each
81 S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. 50.00 Each
82 S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed. 75.00 Each
83 S&F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. 10.00 Each
84 Taking down steel ventilators up to 4 story building complete all as specified and directed by Engr-in-Charge (Note: Distrubered area must be plastered and match with existed colour including putty complete all as specified and directed. 15.00 Each
85 S&F Aluminium colour powder coated (shade or tint as directed by GE) window frame of using Jindal or equivalent section No 20032 (61.85x31.75x1.50mm) fixed with thrust bolt in walls by drilling for half bottom and top half with top hung shutter using suitable section with 4mm thick tinted glass complete all as specified and as directed. 5.00 Sqm
86 M&L for Complete removal of existing treatment from wall/ceiling etc by scrapping, wire brushed and preparing old plastered/New plastered wall surface and applying two coats of distemper oil emulsion by Auto Roller over a coat of primer including applying 2 to 3mm thick wall care birla putty punning complete all as specified. 570.00 Sqm
87 Removal of debris/malwa to a distance exc 10 Km but n exc 15.00 Km out side MD land and depositing in Low lying area or as directed. (Note :- Place of Disposal in out side MD land is rest with the Contractor) 15.00 Cum
88 Dismantling of existing roof treatment of any description/thickness including cuba, dismantling of water proofing plaster etc all as specified and as directed by Engr-in charge. 450.00 Sqm
89 M&L for PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate coping, benching, roof padding as levelling course complete all as specified and directed by Engineer-in-Charge. 6.00 Cum
90 Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed by Engineer-in-Charge. Note :- 1. Plaster shall be measured and separately under appropriate item of Sch A . 2.Rate of this item is inclusive of diconnect fitment at water tank or solar heater etc and refixing in the same position after compeleting of roof treatment. 440.00 Sqm
91 M&L for applying 3.00mm thick APP based polymer membrane over 85/25 industrial bituminous coat @ 3 Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered clean and dry roof surface. Top surface shall be finished with bituminous base Aluminium paint, all joint shall be sealed by torch application complete all as specified & as directed by Engr-in-charge. 450.00 Sqm
92 M&L rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed. Note: The work to be executed at the hieght of 12 to 15 mtr the rate for necessary scaffolding deemed to be included in the qouted rate. 300.00 Sqm
93 M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) 200.00 Sqm
94 M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 450.00 RM
95 M&L preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed. 655.00 Sqm
96 Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm and but n,exc 4 sqm each for archives soffits, linings window boarss etc complete all as specified and directed. 5.00 Each
97 S & F for anodised aluminium frame (minimum 50 micron powder coating) for doors windows ventilators with one or more rebates including cleat for fixing etc complete all as specified and directed by Engr in charge 310.00 Kg
98 S & F aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) windows and ventilator shutters with aluminium grill side hung type without sash bars aluminium section weighing 0.55KG/Sqm including necessary jointing cleats glazing clips rubber packing anodised snap beading screws anodised aluminium fitting such as peg stay 150 mm long (01 No) hinges type B2 100 mm long(02 No) suitable handle (01 No) complete all as specified and directed. 16.00 Sqm
99 S & F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.complete all as specified and directed. 14.00 Sqm
100 S & F 5.5 mm thick sheet glass selected quality and glazing with oil putty in squareds exc 0.50 sqm in each pane complete all as specified and directed. 25.00 Sqm
101 S&F double action floor spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. 5.00 Each
102 S & F 4 lever brass mortic lock,vertical type , size 100 mm complete all as specified and directed. 5.00 Each
103 S & F MS framed work such as grills, gratings, with ornamental & intricate design for windows, ladder, Spiral stair case etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, incl hinges, framed balusters, walk ways; railings & similar work conforming to Fe 290 GDE -E-165 complete all as specified and directed. 250.00 Kg
104 M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge. 25.00 Sqm
105 M&L for applying Two coat synthetic enamel paint including preparation of old steel/iron surfaces exc 10cm in width or girth complete all as specified and as directed by Engineer-in-charge. 25.00 Sqm
106 M&L Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) with white Plastic Seat cover, with Recessed Bottom closed pattern and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. 1.00 Each
107 S&F in repair looking mirror 750x600x6mm thick selected quality glass mounted on 25mm size SS Stud fixed with CP brass screws complete all as specified and directed by Engr-in-Charge. 1.00 Each
108 S&F Bib Cock 15mm Bore (dia), fancy type chromium plated long body bib cock, screwed down, screwed for iron pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. 2.00 Each
109 M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed. 200.00 Sqm
110 M&L for Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. 130.00 Sqm
111 M&L Machine pressed precast concrete inter locking paver block any shape and size with grey cement and no pigment conforming to IS 15658-2006 of 60mm thickness , M-35 Grade including 50mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. 100.00 Sqm
112 M&L preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots etc and applying one coat of white wash on old decorated plastered surfaces of ceiling complete all as specified and directed by Engr-in-Charge. 255.00 Sqm
113 M&L preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots etc and applying one coat of white wash on old decorated plastered surfaces of ceiling complete all as specified and directed by Engr-in-Charge. 13.00 Cum
114 M&L Mild steel 1mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, hole punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required and directed by Eng-in-charge. 58.00 Sqm
115 M&L Mild steel 1mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, hole punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required fixed in repairs and directed by Eng-in-charge. 20.00 Sqm
116 Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engr-in-Charge. 2.00 Qtl
117 M&L for Plain cement concrete type D- 2,1:4:8 (40mm graded aggregate) and 100mm thick complete all as specified and directed by Engr-in-Charge. 250.00 Sqm
118 Cement concrete work in pavement hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 10 cm complete all as specified and directed. Note:- (i) Design mix shall be got approved by GE before commencement of hardstanding work. (ii) Quoted rate will be adjusted by adding / deducting, if extra / less cement used for cubic metre at the rate of Rs. 8.00/ Kg. 200.00 Sqm
119 M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed by EIC. 6.00 Cum
120 M&L for Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil and complete all as specified and as directed by Enginner-in-charge. 70.00 Cum
121 M&L for Removing excavated material (soil) exc. 250m but n exc. 500m and depositing, complete all as specified and as directed by Enginner-in-charge. 70.00 Cum
122 Schedule of Work (E/M)
123 Taking down carefully existing copper /aluminum point wiring (Light, fan, socket or power) complete including fittings and fixtures such as switches ceiling roses socket, regulator etc. and making good disturbed surfaces of walls, floors etc to match with the existing surface/ finishes complete all as specified & directed. 60.00 Per point
124 M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also incl suitable modular bottom sunk type pressed steel terminal box and suitable modular top cover with frame and No of modules for the following :-
125 One light/fan/bell point controlled by one, one way switch. 50.00 Per Point
126 One three pin socket outlet 5 Amp controlled by one, one way switch on same board 10.00 Per Point
127 Supply and fix switch modular 6 Amps 1 module 230 Volts one way complete all as specified and directed. 60.00 Each
128 Supply and fix modular socket , 6 Amp 2/3 pin combined 2 module 230 Volts complete all as specified and directed. 10.00 Each
129 M&L for taking down ceiling fan, after disconnecting cable end, regulator, dismantling of blades inclding deposit the same at E/M Stroye Yard complete all as specified and directed 10.00 Each
130 Supply and fixing exhaust fan of 380 mm sweep complete with all accessories complete all as specified and as directed. 10.00 Each
131 S & F in replacement LED tube Ligtht fitting 20 watts surface an wall mountedn LED batten extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and as directed. Make:- Halonix CAT NO-HLB-03-20-CW-AL-HL1/Phillips/Bajaj or equivalent out of make specified in 'list of makes'. 20.00 Each
132 S & F in replacement LED tube Ligtht fitting 10 watts surface an wall mountednLED batten extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and as directed.Make:- Halonix CAT NO-HLB-03-20-CW-AL-HL1/Phillips/Bajaj or equivalent out of make specified in 'list of makes'. 20.00 Each
133 Supplying, installation, commissioning and testing cubical out door feeder LT panel board of suitable size , platform mounted, factory made totally enclosed dust and vermin proof (protection class IP-54, CPRI Approved) double shutter front and back opening with locking arrangement complete supported on angle iron 50 mm x 50 mm x 6 mm thick frame work and 3.15 mm thick CRCA sheet duly painted with powder coated paint to all steel surfaces over outside and inside complete including necessary PCC 1:2:4 foundation and necessary electrical connection of incomming and outgoing cable with necessary lugs complete all as specified and directed. The panel board shall be suitable for 415 volt, 50 Hz, 3 phase, 4 wire system with epoxy type copper bus bar of appropriate size and internal control wiring shall be of insulated multi stranded copper conductor cables :- 1.00 Each Job
134 INCOMING : (a) MCCB, four pole, 400 Amp, 36 KA at 415 Volts, adjustable thermal and magnetic setting- 01 No. (b) 1000 Amps rated copper bus bar suitable for 4 pole system - 01 Set. (c) Phase indicating lamp RYB LED type (Set of three ) -01 Set . (d) Voltmeter Digital type 0-500 Volts capacity with integeral selector switch dully prewired. (e) Ammeter Digital type 0-400 Amp capacity with integeral selector switch and CT coils of suitable capacity 400/5A dully prewired.
135 OUT GOING :- (a) MCCB four pole 320 Amps, 36 KA at 415 Volts, adjustable thermal and magnetic setting-02 Nos . (b) MCCB four pole 250 Amps, 36 KA at 415 Volts, adjustable thermal and magnetic setting-02 Nos (c) Spare box suitable for 250 Amps 25 KA MCCB - 01 No
136 Material and labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area of the following size 300 Sqmm 3 and 1/2 core complete all as specified and directed. 50.00 RM
137 Material and labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area of the following size 50 Sqmm 3 and 1/2 core complete all as specified and directed.. 51.00 RM
138 Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron strips 32 x 6 mm by means of nuts both check nuts and washers made of galvanised iron or steel earth strip protected by galvanised iron pipe 40 mm bore medium grade upto ground level as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1 pre cast RCC cover slab 30 cm x 30 cm x 10 cm thick including reinforcement with 8 mm dia steel deformed bars at the rate of 10 cm both ways with one lifting handle made of 8 mm dia MS bar funnel, wire mesh 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal on coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Part-I and testing on completion complete all as specified and directed. 2.00 Each
139 Taking out unserviceable DBs by carefully disconnecting the existing connections complete all as specified and directed. 2.00 Each
140 Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as specified and directed. 74.00 Per point
141 Taking down unserviceable/burnt, copper/aluminium submain wiring complete including conduits of any kind and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors, etc. complete all as specified and directed. 30.00 RM
142 Material and labour in replacement for point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable in and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the One light/fan/bell point controlled by one switch. 74.00 Per point
143 All as per item No 137 here-in-before but for one 3 pin socket outlet 5 Amps, independent board. 12.00 Per point
144 All as per item No 137 here-in-before but for one 3 pin socket outlet 5 Amps,on the same board. 10.00 Per point
145 All as per item No 140 here-in-before but for one 3 pin socket outlet, 15 Amps, on the independent board with cables 4.0 Sqmm. 12.00 Per point
146 M&L for concealed sub main wiring alongwith earth wire,concealed in walls/ floors or fixed in wall/ceiling, including the cutting of chases and provision of PVC conduit (heavy grade), and making good to surface to match the original surface, with the following sizes of FRLSH PVC insulated unsheathed copper conductor, single core cable in PVC conduit (Heavy grade) of size 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire complete all as specified and as directed. 30.00 RM
147 M&L for highly effieicnt discrete high power LED flood l light, housing made of Aluminium, PDC housing powder coated with lens, IK10 & IP 67 complete with suitable lamp of 70 watt complete and all accessories internally pre-wired and including conneting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 4.00 Each
148 Supply and fixing LED street light fitting of capacity 35 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS/ Crompton or equivalent out of make specified in 'list of makes'. 2.00 Each
149 M&L LED box channel luminarie made out of CRCA sheet suitable for 1 x 20 Watt LED T8 including LED T8 tube, IP 20 complete all as specified and as directed. (Make: Halonix CAT No: HLIB-05-118 LED-1S /Bajaj/Philips/CG or equivalent out of make specified in 'list of makes'.) 50.00 Each
150 S&F air circulator fans 230 Volts single phase oscilating 450 mm sweep suitable for wall mounting plastic body complete all as specified and directed. Make-Havells/Bajaj/crompton or equivalent out of make specified in 'list of makes'. 6.00 Each
151 S&F exhaust fans AC single phase 230/240 V of size 450 mm sweep with louver (HSN Code-8414) Make-Havells/Bajaj/crompton or equivalent out of make specified in 'list of makes'. 4.00 Each
152 S&F fans ceiling complete with electronic type regulator and accessories 230V, 1200 mm sweep, BEE 5 star rated complete all as specified and as directed. Make-Standard/Havells/Bajaj or equivalent out of make specified in 'list of makes'. 8.00 Each
153 M&L for modular switch 1 way, 6A, 1 module complete all as specified and directed. 96.00 Each
154 M&L for modular switch 1 way, 16A, 1 module complete all as specified and directed. 12.00 Each
155 M&L for socket, modular, 6A-2/3 pin combined, 2 module complete all as specified and directed. 22.00 Each
156 M&L for socket, modular, 6A/16A -2/3 pin combined, 2 module complete all as specified and directed. 12.00 Each
157 M&L for ceiling rose 63.5x23.5 mm 3 terminals, PVC/Polycarbonate, isolated body complete all as specified and directed. 74.00 Each
158 M&L for modular white cover plate with frame, 8 module complete all as specified and directed. 10.00 Each
159 M&L for modular white cover plate with frame, 6 module complete all as specified and directed. 10.00 Each
160 M&L for modular white cover plate with frame, 3 module complete all as specified and directed. 24.00 Each
161 M&L for modular metal flush box, 8 module complete all as specified and directed. 10.00 Each
162 M&L for modular metal flush box, 6 module complete all as specified and directed. 10.00 Each
163 M&L for modular metal flush box, 3 module complete all as specified and directed. 24.00 Each
164 Supply and fixing sheet metal enclosure double metal door factory made TPN 415 volt 4 way suitable for fixing MCB as outgoing and MCCB TP 63 to 125 Amps 16 KA as main incoming duly painted all as specified in cat No. DBVTL004DD of L&T or equivallent including necessary electrical connection and flush in wall with necessary pcc works and make good the distrubed surface with existing surface complete all as specified and directed. 1.00 Each
165 S&F in replacement of MCCB 3 pole, capacity 125 Amps with breaking capacity 16 KA, overload setting adjustable and short circuit setting fixed complete with necessary modifications in Panel Board for connection of MCCBs complete all as directed including disconnecting UNSV MCCBs Connecting and testing all as specified and as directed. 1.00 Each
166 S&F MCB, SP, breaking capacity min 10KA,'C' curve 230V, 6 to 32 Amps complete all as specified and directed. 12.00 Each
167 S&Fsheet metal eoclosure for DBs when MCBs to be used single pole neutral 8 way, double door 415 V rating complete all as specified and directed. 1.00 Each
168 S&F MCB, islolator , breaking capacity min 10KA,'C' curve 230V, 40 Amps complete all as specified and directed. 1.00 Each
169 S&F industrial wall mounted plug socket suitable for IP 67 degree of protection 16 Amps rating 3P+N+E complete all as specified and directed. 1.00 Each
170 Disconnecting / taking down carefully existing unserviceable LT panel board / feeder pillar box any type and capacity including all control switches, fitting and fixtures from different location including disconnection of existing electric incomming and outgoing cable of any size upto length of 300 RM and relaying back to another location and dismantling of PCC platform and make good with existing surface complete all as directed by the Engr-in-Charge. 1.00 Each Job
171 Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed. 12.00 Cum
172 Material and labour for fly ash/burnt Bricks, sub class 'B' dry, well brunt bricks laid in trenches for cable protection all as specified. 0.80 Per 1000
173 M&L for sand filling in trenches for cushioning of cable complete all as specified and directed. Note :- Compacted / punned earth shall be considered for the purpose of payment. 8.00 Cum
174 Note:- The amount of Rs 44802.00/- against Schedule of Credit on Page No 152 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance
Tender InquiryInquiry