“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Balance Civil Works For Aarey , Mumbai - Tender Details
Explore tender information for Balance Civil Works For Aarey in Mumbai, including eligibility, deadlines, and bid specifics.
Mumbai Metro Rail Corporation Limited
Mumbai, Maharashtra, India
NTID 39307562
Opening Date : Tue 4th March, 2025- Closing Date : Mon 3rd March, 2025
- ₹ 59800000.00
- NTID 39307562
Balance Civil Works For Aarey Car Depot Of Mumbai Metro Line-3 Project
Key Values: Document Cost: 0.00 | EMD: 598000.00 | Estimated Cost: 59800000.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
598000.00 -
Document Cost
Refer Documents -
Estimated Cost
59800000.00
BOQ Items Total Items : 134 | Total Qty : 90883.73
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and erecting Chain link fencing (Support below ground) l.6 Rmt. meter height with galvanized iron chain link of size 50 mm x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical mild steel angles of 40 x 40 x 6 mm size, embedded in cement concrete block of 1 :4:8 mix of size 45 x 45 x 60 cm 2 .5m centre to centre with iron bar 16 mm dia. as hold fast including welding link with angle frame at 30 cm centre to centre including pit excavation 45 x 45 x 60 cm, nuts and bolts and horizontal mild steel angles at top and bottom of 25 x 25 x 5 mm size and vertical mild steel flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both sides at interval of 25'-0" and at every corner or bend embedded in concrete blocks of 1:4:8 mix of size 45 x 45 x 60 cm including three coats of oil painting, etc complete as directed by Engineer-in-charge | 2970.00 | Rmt |
| 2 | Providing and erecting Chain link fencing (Support above road) l.6 Rmt. meter height with galvanized iron chain link of size 50 mm x 50 mm, 8 gauge thick and fixed 75 mm above road surface on vertical mild steel angles of 40 x 40 x 6 mm size, with MS base plate 150x150x10 mm, each plate fixed on road with iron bar 16 mm dia. as hold fast including welding link with angle frame at 30 cm centre to centre, nuts and bolts and horizontal mild steel angles at top and bottom of 25 x 25 x 5 mm size and vertical mild steel flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both sides at interval of 25'-0" and at every corner including three coats of oil painting, etc complete as directed by Engineer-in-charge | 800.00 | Rmt |
| 3 | Providing, detailing, fabricating and fixing structural steel works using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings, transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection, etc complete as directed by Engineer-in-charge | 40.00 | MT |
| 4 | Supplying and fixing of Maintenance Walkway System at roof top of upto 750mm width (FRP panel 3m x 0.75m x 30mm thick, 38 square opening with all fixing clamps & fasteners) with load carrying capacity upto 700 kg/m2 made up of FRP grating fixed to the roof sheeting with clamps made up of Galvanized Iron or suitable material as approved by Engineer in charge. 6 nos of SS clamps per grating. Clamps shall be locked with fasteners of Stainless-steel Grade-304 as per bimetallic compatibility strength. The seam clamps shall be installed over roof sheeting panels using stainless Steel fasteners. The clips are designed in such way that it suits the seam of installed panels, and it doesn't restrict the thermal movement of roof panels, etc complete as directed by Engineer-in-charge. | 1072.50 | Sqm |
| 5 | Supply & installation of Fall Protection System with clamps suitable to the clip lock roofing sheets. 4 x split Aluminium clamps to be used below 4 corners of base plate (Roof sheet non-penetrating), as per the manufacture s specification or as approved by Engineer in charge. The Fall Protection System shall be tested to EN795-2012 Class A2 & Class C and be capable of supporting 2 users working simultaneously at any point along the 8 mm 7 x 7 stainless steel cable even in the same area between 2 posts and shall demonstrate that an individual post is capable of absorbing a direct dynamic load of 300 kg dropped through 1.5m and limit the force to the roof to 10 kN in shear without damage to the roofing substrate, etc complete as directed by Engineer-in-charge. | 1016.00 | Rmt |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054