“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Annual Rate Contract For The S, Shimla - Tender Details
Explore tender information for Annual Rate Contract For The S in Shimla, including eligibility, deadlines, and bid specifics.
Industries Department
Shimla, Himachal Pradesh, India
NTID 39435652
Opening Date : Wed 19th March, 2025- Closing Date : Wed 19th March, 2025
- ₹ 1457612.00
- NTID 39435652
Annual Rate Contract For The Supply Of Agriculture Implements/ Tools
Key Values: Document Cost: 500.00 | EMD: 50000.00 | Estimated Cost: 1457612.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50000.00 -
Document Cost
500.00 -
Estimated Cost
1457612.00
BOQ Items Total Items : 14 | Total Qty : 14
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Plough Bhangrotu type (Soil Each stirring) conforming to the designing or equivalent of Agricultural Engineer H.P.Department of Agriculture, H.P. Model 1986. Net weight with flat handle-8.000 kg. +-2% variation. Detailed specification for item code No. M-2801001001. 1) Main body of the plough: The body of the plough made of 5mm thick sheet & its length should be 28 cms. & height 215mm. duly rivetted with one landside of M.S. Angle 35x35x6mm of 200mm. length supported with two supports for blade and board made of M.S. Angles 35x35x5mm, rivetted with main body of the plough. 2) Standard:- One standard made of M.S. Flat of 35x10mm in 290mm. length should be revitted with main body of the plough. The holes should be made for U clamp. 3) U Clamp: A U clamp made of M.S. Round 12mm in 30cms length, both ends be threaded and two nuts of 12mm provided with both ends of U clamp. 4) Stay Strip:- A stay strip made of M.S. flat 25x5mm in 200mm length be provided with four holes adjusting the length beam. 5) Board: The board made of 5mm thick sheet slighty covered in the centre. The Width of the board at top should be 20cms 14cms. in lower portion. The board should be bolted with counter sunk bolts and nut with supports rivited with main body of the plough. The length of the board from the centre be 17 cms. 6) Blade: The blade should be made of high carbon sheet or rail of 6mm thickness and in triangular in shape. The upper portion of the blade should be 14cms. in width and 26cms. in length. The blade should be bolted with two counter-sunk bolts and nuts with supports revitted with main body of the plough. 7) Handle: The handle made of M.S.Flat 35x8mm in 850m in length, provided with one hole in the lower portion of the handle so as to fix the handle land-side and upper portion be provided with one conduit pipe grip of 32mm dia of 1.6mm thick and in 15cms. length., One ring should be provided with handle.Total weight of S.S. Plough with handle approximately 8 kgs. (main plough 6 kgs. and handle 2 kgs.)with variation of +-2%. | 1 | Each |
| 2 | S.S Plough (Soil Stirring plough (Bhangrotu Type) conforming to the desgning of Agricultural Engineer H.P. Department of Agriculture, H.P. Model 1986. Net weight with conduit pipe handle-6.70 kg +-2% variation. Detailed specifications is as under:- 1. Standard:- The standard (Main body on which share blade and board are fixed) should be of Mild Steel flat of the size of 450x50x10mm curved at lower end, to fix the share blade and board on it. 2. Board:- The board should be made of M.S. Sheet 6mm thick slightly curved at the centre/middle. width of the board at the top and lower portion should be 210mm and 140mm respectively. The length of board at the centre should not be less than 150mm. 3. Share Blade:- The blade should be made of high carbon steel (0.90% carbon) or rolled railwayline. It should be triangular in shape with base width of 140mm, length at the centre should be 260mm and thickness 6mm. 4. Land side:- The land side should be made of M.S. Angle 37 x 37 x 5mm having length of 255mm. 5. Saddles:- Two saddles having sizes 120x75x6mm and 120x30 x 5mm respectively should be made of M.S. Flat and welded on the standard with 4mm electrodes. The share blade and board should be fixed on the standard by means of counter sunk bolts and nuts, 2 Nos. each on the welded saddles. 6. Stay strip:- A stay strip made of M.S. Flat 30x5mm in 255mm length, should have four holes to link the standard and handle, thereby helping in adjusting the length of beam. 7. U-Clamps:- A U-clamp made of M.S. rounds 12mm dia having 255mm length, both ends be threaded and two nuts of 12mm provided with both ends of U-Clamp. 8.Handles:- i) M.S. conduit Pipe Handle:- handle should be made of M.S. Conduit pipe having length one meter & dia 32mm of 16guage (1.63 thick). The upper portion of 150mm should be bent for gripping the handle. Lower portion should be pressed and welded to M.S. Flat 60 x 30 x 5mm. The handle should be fixed on the land side at rear end by means of Hexagonal bolt 25 x 8mm, five Nos, of holes of 12mm dia for fixing and adjusting the height of beam be provided at a height of 170mm from bottom end. The distance from centre to centre of the holes should be 25mm. Weights of each components of Bhangrotu type S.S.Plough conforming to the designing of the Agricultural Engineer, H.P. Bhangrotu, Distt. Mandi and as per specification:- Sr.No. Name of the component. Gross standard weight. 1. Standard-1.755 kg.; 2. Board - 1.232 kg.; 3. Share Blade -0.900 kg.; 4. Land side - 0.885 kg.; 5. Saddles First - 0.341 kg.,Second 0.145 kg.; 6. Stay strip -0.300 kg. ; 7. U-Clamp - 0.227 kg.; 8. Nuts & Bolts - 0.265 kg. Gross weight of S.S.Plough without handle 6.050 kg. Wastage due to holes cuts & grinding of edges and sides of each component to give final finishes+-= 0.300 kg. Net weight with variation of + - 2% = 5.750 kg; 9. Weight of M.S.Conduit pipe handle = 1.000 kg | 1 | Each |
| 3 | S.S PloughLight duty, net weight with conduit pipe handle-4.750 Kgs+ - 2.5% variation. Detailed Specification are as under:- 1. Standard:- The specification ( Main body on which share blade and board are fixed should be of mind steel flat of size 450*50*6mm, curved at lower end to fix share blade and board on it.. 2. Board:- The board should be made of M.S. Sheet of 3.mm thick, slightly curved at the centre/middle. With of board at top & lower portion should be 190mm and 120mm respectively. Lenght of the board at the centre should not be less than 130mm. 3. Share Blade:- The blade should be made of high carbon steel or rolled railway line. It should be triangular in shape with base width of 120mm, length at the centre should be 2500mm and thickness 6mm. 4. Land Side:- Land side should be made of M.S Angle 35*35*5mm having of 255mm. 5. Saddles:- Two saddless having size of 120*75*5mm and 120*25*5mm. Respectively should be made of M.S Flat and welded on standard. The share blade and board should be fixed on standard by counter sunk bolts and nuts, two Nos. each o welded saddles. 6. Stay Strip:- A stay strip made of M.S. Flat 25*5mm and 255mm length, should have four holes to link the standard & handle, therby helping in adjusting the length of beam. 7. U Clamp:- A U-clamp made of M.S round of 12mm dia having 255mm length, both ends be threaded & two nuts of 12mm provided with both ends of U-Clamp. 8. M.S Conduit Pipe Handle:- Handle should be made of M. S Conduit pipe having length one meter & dia 32mm of 16swg (1.63mm thick). The upper portion of 150mm should be bent for gripping the handle. The lower portion should be pressed & welded to M.S Flat 60*30*5mm, The handle should be fixed on the land side at rear end by means of Hexagonal bolt 25*8mm, five Nos. of holes of 12mm dia for fixing & adjusting the height of beam be provided at a height of 170mm from bottom end. The distance from centre to centre of the holes should be 25mm. Weight of plough with 4.750 Kgs +_2.5% All Dimensions subject to variation of +_ 2.5% | 1 | Each |
| 4 | "Plough Shares for soil sterring plough Model-1986, Deptt. of Agriculture, H.P. conforming to IS:6327-1971, with proper hole, size weight strictly as per share already fitted with plough" | 1 | Each |
| 5 | Cycle Plough 1. Length of the handle 1370mm. A pipe of 25 od (over dia) 25mm with plastic grip 125 mm long and dual pipe distance 300mm. There should be a sufficient curve in the pipe which is connected to the joint of the base frame. 2. Base frame ( flat size 40x5mm). 460mm long. Half cutted 10mm capsule hole is required for adjusting the wheel. 3. The plough attached with base frame should be of solid pipe having length 270x25mm. For reversible action, plough and rake should be welded with pane. Rake angle length should be 300mm, width 32x32.3 mm. The length of forged and arrow type spike should be 200 mm and diameter 10mm. 4. Base frame should be riveted in the bottom and bolted on the top. Two holes are required for adjustment (as per the height of the person) of the dual pipes with the help of two flats(size 255mm). 5. A normal tubeless tire of 480mm. 6. A V-shaped Pulling sling should be welded in the front for pulling the cycle plough with rope etc. The size of pulling sling should be 700mm long. 7. Size of plough -32x8mm base frame, top plate(12gauze mild steel )-top side 200mm, Left and Right side 125mm, Bottom side 100mm. The triangular blade of 100x200 mm and 4mm thick with two holes of 8mm. | 1 | Each |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054